Industries / Industrial equipment and services / Industrial machinery
Valves
The valve industry designs and makes the valves that start, stop and regulate the flow of water, steam, oil, gas and chemicals in pipes, and the actuators that move them on command.
1st century CE
In Pompeii, bronze valves soldered into the lead water pipes let the flow to fountains, baths and houses be turned down or shut off. Each held a hollow bronze plug with a hole through it, turned with a key, the layout of a modern plug valve, and the Museo Galileo in Florence says such valves were made to fixed models known from the writings of Frontinus, Rome's water commissioner.
31
Milestones achieved across 6 domains.
8
To watch for: announced, not yet confirmed outside.
12
Open deliverables. Nobody has shipped them.
In one minute
Where it started
Roman metalworkers cast bronze plug valves to fixed models for the water pipes of towns such as Pompeii. Valve making became a factory trade with steam power and city water works: Richard Teller Crane opened the Chicago brass foundry that became Crane Co. in 1855, and William Fisher began making a pump governor for the Marshalltown, Iowa, water works in 1880, the start of the Fisher control valve business.
Where it stands
By the market research firm IndexBox's modelled estimate from customs data, China made about 49% of the world's valves by weight in 2024, five times the second producer, the United States, and supplied a quarter of world valve exports by value. Many valves now carry a computer: Emerson says it had sold 3 million of its FIELDVUE digital valve controllers by 2022. Limits on gas leaking from valves keep changing, and in October 2026 the US Environmental Protection Agency proposed to loosen parts of its 2024 rule.
What is open
Much of what shows whether a valve is good stays in private files: factory test reports, leak certificates, casting X-rays and catalog flow figures are checked one buyer at a time, or not at all. Public test sets, registers and low-pressure bench tests that anyone can repeat are within reach of a small team, helped by AI models that read documents and photos and by low-cost robot arms that learn a task from a few demonstrations.
Domains
AchievedWatch forOpen
Domain
Progress
Last achieved
Watch for
Open
Valve types and design
This is the work of deciding how a valve opens and closes, what it seals with, and how much pressure and heat its body can safely hold.
5 · 1 · 2
Last achievedPipeline valves for hydrogen2024
Watch forValves for hydrogen aircraft
2
openCasting and machining
This is the work of making a valve's parts: casting or printing the body, machining it, and making sure the metal and the markings are what they claim to be.
5 · 1 · 2
Last achievedPrinted in place of casting2026
Watch forPrinted trims for sour gas
2
openActuators
An actuator is the motor, piston or spring unit fixed to a valve that opens and shuts it on command, so that nobody has to turn a handwheel.
4 · 2 · 2
Last achievedValves that close themselves2022
Watch forElectric with a spring return
2
openControl valves
A control valve sits partly open by just the right amount, moved all the time by a control system, so that a pressure, level, temperature or flow stays where it should.
6 · 2 · 2
Last achievedSizing by one standard2011
Watch forDiagnosis without a specialist
2
openTesting
Testing is the set of pressure, leak, fire and flow checks that a valve, or a sample of its design, goes through at the factory or in a laboratory before it is sold or approved.
5 · 1 · 2
Last achievedCertified in pure hydrogen2025
Watch forA 500 bar hydrogen valve
2
openLeaks to the air
This work is about the gas that escapes from valves into the air, around the stem, through body joints or on purpose from gas-driven controls, and about the tests and rules that limit it.
6 · 1 · 2
Last achievedZero-emission controllers required2024
Watch forA looser rule proposed
2
open
Advances to build with
3 research notes

Claude Fable 5.2
Three working devices
Anthropic says its AI model Claude Fable 5.2 designed three prototype devices that worked without electrical modifications, with no outside test reported.

NVIDIA GR00T 2
Five demonstrations per task
By NVIDIA's own test, its robot model GR00T 2 averages 95% success after five demonstrations of a task, on 50 tasks picked from those it learns that way.

MIPS Actus
Maintenance inside the joint
MIPS says its Actus chip can drive a robot joint's motor and also run models that predict when maintenance is due, and no independent measurement was found.
Open in valves
3 of 12 open deliverables
Open · Valve types and design
Valve choice, scored against experts
A public test of how well AI models choose a valve. It holds at least 300 written service descriptions (the fluid, its pressure and temperature, the pipe size, how often the valve moves and how tightly it must shut), each answered by experienced valve engineers with a valve type, body and seat materials, a pressure class and end connections, plus a scorer that grades any model's answer field by field.
Built with what exists
Cases written from public case studies and makers' selection guides; a spreadsheet or Label Studio to collect the engineers' answers; AI models through their public APIs, including Gemini Decision 1, which returns probabilities for fixed-answer questions in one pass (see the Note "A thousand questions, one pass"); Python for scoring.
Open · Casting and machining
Radiographs of valve castings, labeled
A public set of digital radiographs (X-ray images) of steel valve-body castings, scanned from films and files that foundries already hold, in which two qualified radiographers working separately outline each flaw, such as gas holes, shrinkage, sand inclusions and cracks, and grade it against the acceptance level the casting was bought to; plus a baseline detection model and a scorecard.
Built with what exists
Archived radiographs from foundries, digitized with a film scanner and stripped of customer names; CVAT for outlining; open detectors such as RetinaNet or YOLO, starting from public code written for GDXray's castings; one graphics card. No new X-ray work is needed.
Open · Actuators
An open actuator controller
Open firmware and a reference circuit board for a small electric quarter-turn actuator. The board drives a 24 V DC gear motor, reads valve position from a magnetic angle sensor, estimates torque from motor current, stops at a set torque, runs a partial stroke test on command, and logs a signature (torque against position) for every stroke, all published under an open license.
Built with what exists
A motor-control chip such as Renesas's RZ/T2N (see the Note "Four axes, one chip") or a common STM32 microcontroller; a small gallium nitride motor driver such as ST's (see the Note "A half-bridge in 6.5 by 5 mm"); a magnetic angle sensor such as the AS5048; a 24 V gear motor and a 1-inch ball valve; a reaction torque sensor to calibrate against. A chip that both drives the motor and runs a wear model, such as the one in the Note "Maintenance inside the joint", could host the signature analysis.
Where it sits
Broader
Industrial machinery