Industries / Industrial equipment and services / Industrial machinery / Valves
Valve types and design
This is the work of deciding how a valve opens and closes, what it seals with, and how much pressure and heat its body can safely hold.
5
Milestones achieved, from 1928 to 2024.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1928
A sealed-off diaphragm valve
P. K. Saunders invented the diaphragm valve in 1928, licensees made it at first, and he founded the Saunders Valve Co. in 1934, by Grace's Guide's account; its valves were later made at Cwmbran in Wales. In the original "weir type" a flexible diaphragm closes the valve by pressing down onto a ridge across the body, so the moving parts never touch the fluid. Crane, which now owns the Saunders brand, says the features of that original design are why it is still the valve of choice for sterile lines in drug and biotech plants, where its bodies are made without cavities and drain themselves.
Credit
P. K. Saunders; Saunders Valve Co
1960
Plastic seats seal both ways
Howard G. Freeman left the Rockwood Sprinkler Company in January 1955 and started Jamesbury the next month, to make a ball valve that shut tight with flow from either side, using flexible seats of PTFE, the plastic DuPont sold as Teflon. He filed for the patent in February 1958 and received US patent 2,945,666 in July 1960; the US Navy bought the valves for submarines, and Jamesbury's suit over copies made for the Navy was won only in 1980. Crane had patented a ball valve with spring-loaded rubber seats in 1945 (US 2,373,628) but chose to put its effort into other valve types.
LessonCrane held the idea first and did not develop it, by Valve Magazine's account, and the business went to the company that did.
Credit
Howard G. Freeman; Jamesbury
1973
Ratings from the metal
Steel valves had long borrowed the pressure and temperature ratings of the pipe flanges they bolted to. ASME B16.34, approved by the American National Standards Institute in October 1973, instead calculated a valve's rating from the strength of its body material at each temperature, a method the Manufacturers Standardization Society (MSS) had first published in its SP 66 of 1964, and it raised coverage from 17 materials to 24 material groups. ASME says the 1973 edition also set a "ceiling pressure" that no material could exceed, and from 1977 B16.34 covered flanged valves as well.
Credit
ASME B16 Subcommittee 15, which first met in December 1970; MSS
1975
A metal seat for butterflies
A butterfly valve shuts by turning a disc a quarter turn across the pipe, and soft seats limited how hot it could work. By Neles's account, Antti Nelimarkka, co-founder of the Finnish company Neles, asked his team in 1973 for a metal-seated butterfly valve that stayed tight at up to 600°C (1,100°F); they produced a "triple offset" design, an elliptical disc closing against a metal seat ring, first delivered in 1975 and still made.
Credit
Antti Nelimarkka; Neles, now part of Valmet
2024
Pipeline valves for hydrogen
Hydrogen is a smaller molecule than natural gas and catches fire easily, and soft seals must be shown to survive ageing and rapid loss of gas pressure in it, so decades of natural gas service do not prove a valve for hydrogen. After SLB proposed it, the American Petroleum Institute (API) published requirements for valves in hydrogen gas service in 2024, as Annex M of API Specification 6D, the main specification for pipeline valves, according to Jonathan Geleijns of SLB, who co-chaired the task group.
Lesson"proven technology" is not the same as "technology proven for a particular application", in Geleijns's words.
Credit
API task group of users, valve and seal makers and test centers
Watch for
Valves for hydrogen aircraft
KITZ Corporation of Japan says it has finished component-level tests of five valve types, of three design concepts, developed since 2021 for hydrogen-powered aircraft, and that they kept a stable seal at cryogenic temperatures; a stage-gate review on 24 February 2026 let the project go on to its next phase.
Achieved whenan aircraft or engine maker or another party outside KITZ publishes results from the valves working in a liquid hydrogen system test.
Claimed by
KITZ, May 2026
Open
01
Valve choice, scored against experts
A public test of how well AI models choose a valve. It holds at least 300 written service descriptions (the fluid, its pressure and temperature, the pipe size, how often the valve moves and how tightly it must shut), each answered by experienced valve engineers with a valve type, body and seat materials, a pressure class and end connections, plus a scorer that grades any model's answer field by field.
The briefCredit · unclaimed02
AI-designed check valves, bench-tested
A check valve lets fluid pass one way only. Ask AI design agents for 3D-printable half-inch check valves for cold water, print each design, and measure on a low-pressure water bench the pressure that opens it, the leak when the flow reverses and the flow it passes, beside designs by engineering students and a bought brass check valve.
The briefCredit · unclaimed
Open 01 · the brief
Valve choice, scored against experts
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public test of how well AI models choose a valve. It holds at least 300 written service descriptions (the fluid, its pressure and temperature, the pipe size, how often the valve moves and how tightly it must shut), each answered by experienced valve engineers with a valve type, body and seat materials, a pressure class and end connections, plus a scorer that grades any model's answer field by field.
Why it is still open
The nearest test, Reshape Automation's Industrial AI Accuracy Index 2026, asked three AI models 100 questions about products from 14 industrial makers; the best setup gave 46 correct and 42 incorrect answers, and Reshape wrote the questions, made the reference answers with its own system and graded the results itself. Grandi and colleagues (2024) compared AI models with experts on choosing materials, not valves, and an open-source valve configurator posted on GitHub in 2026 reads one maker's catalogue but reports no accuracy test. Searches of GitHub, Zenodo and the web in November 2026 found no benchmark for valve selection.
Built with what exists
Cases written from public case studies and makers' selection guides; a spreadsheet or Label Studio to collect the engineers' answers; AI models through their public APIs, including Gemini Decision 1, which returns probabilities for fixed-answer questions in one pass (see the Note "A thousand questions, one pass"); Python for scoring.
First step
Write 30 cases and have two engineers answer them separately, to measure how often experts agree with each other.
Done looks like
300 cases, each answered separately by three engineers, with their agreement reported; at least four AI models scored on every field, including the share of wrong answers given with no hedge; all cases and answers published under a CC BY license.
Open 02 · the brief
AI-designed check valves, bench-tested
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A check valve lets fluid pass one way only. Ask AI design agents for 3D-printable half-inch check valves for cold water, print each design, and measure on a low-pressure water bench the pressure that opens it, the leak when the flow reverses and the flow it passes, beside designs by engineering students and a bought brass check valve.
Why it is still open
Anthropic says its model Claude Fable 5.2 designed three prototype devices that worked, with no outside test reported (see the Note "Three working devices"). Published AI-agent design work has been checked mainly in software: Jadhav and Barati Farimani's 2024 agent designed trusses scored by finite element analysis, and Yong and Camburn (2026) tested whether GPT-4o could predict a prototype's cost and performance, not whether its own designs worked. A web search in November 2026 found no bench test of AI-designed valves.
Built with what exists
AI models that write CAD code in CadQuery or OpenSCAD; a resin or filament 3D printer; a bench of clear tubing, a pressure regulator set no higher than 2 bar, a gauge, a graduated cylinder and a stopwatch.
First step
Build the bench and measure three bought half-inch check valves, to set the yardstick.
Done looks like
At least 10 AI designs and 10 student designs, each printed three times and measured, with opening pressure, reverse leakage at 1 bar and flow at 0.5 bar published together with the CAD files.