BRENNEN

Industries / Industrial equipment and services / Industrial machinery / Valves

Casting and machining

This is the work of making a valve's parts: casting or printing the body, machining it, and making sure the metal and the markings are what they claim to be.

5

Milestones achieved, from 1907 to 2026.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1907

    Steel bodies for high pressure

    Bigger steam engines for the new electric power plants raised pressures, and high-pressure piping needed steel valves and fittings instead of cast iron, by Crane Co.'s account. In 1907 Crane sent its chief metallurgist to Germany to buy the rights to a small steel converter patented by an inventor named Zenzes, brought the inventor back, and built what it calls the first steel-casting center in the Chicago area; within three years it was making valves and fittings with a minimum tensile strength of 60,000 psi (about 414 MPa).

    craneco.com

    Credit

    Crane Co.; Charles R. Crane

  2. 1961

    Photographs judge the castings

    MSS SP-55, first published in 1961 by the Manufacturers Standardization Society, is a set of reference photographs of the surface flaws found on steel castings for valves, flanges and fittings, showing which are generally acceptable and which are not, and ASTM and ASME standards made it a requirement. Its 2025 edition was widened to iron and ductile iron castings because, MSS says, iron foundries had no common standard of their own.

    Lessonunless the buyer asks for more, a standard steel valve casting needs only to pass this visual check and not leak in a water pressure test, Greg Johnson of United Valve told Valve Magazine in 2011, which is why an MSS committee drafted a standard that adds X-ray checks of sampled castings.

    valvemagazine.commoderncasting.comvalvemagazine.com

    Credit

    Manufacturers Standardization Society

  3. 1987

    A maker's name welded on

    In 1987 eight counterfeit 4-inch, 1,500 psi pressure-seal valves sold as Crane valves were found at an ARCO chemical plant near Houston: the name "Crane" had been welded onto each body, and testers found newspapers printed in Chinese characters inside them, which turned out to be Taiwanese, by the US Nuclear Regulatory Commission's account as reported by Valve Magazine. In November 2007 a counterfeit Ladish stop check valve turned up on a stator cooling water skid at the Hatch Unit 2 nuclear plant in Georgia.

    Lessona genuine maker's logo is usually cast into the body, EPRI's Marc Tannenbaum told Valve Magazine, so a logo welded on and ground smooth is a sign a trained inspector can catch.

    valvemagazine.com

    Credit

    ARCO; US Nuclear Regulatory Commission

  4. 2010

    An approval mark faked

    FM Approvals, which tests and certifies fire protection equipment, warned in January 2010 that two counterfeit copies of Giacomini's A155 angle hose valves, which start and stop water to firefighting hoses, carried its certification mark but had never been tested. It listed signs a buyer could check: the fakes had a plain stem nut with a separate washer instead of a flanged nut, and no "GIACOMINI ITALY" nameplate.

    fmapprovals.com

    Credit

    FM Approvals; Giacomini SpA

  5. 2026

    Printed in place of casting

    A pressure-reducing valve for flushing water on a US Navy Seawolf-class submarine needed a new body, but its maker had not cast one in more than a decade and a new casting would have taken 16 months. Penn United printed the copper-nickel body from the old drawings by laser powder bed fusion, which melts metal powder layer by layer; VACCO Industries machined and assembled it and Puget Sound Naval Shipyard pressure-tested it. The Navy says the body met the original casting's technical requirements and the valve was delivered, certified and installed within nine months.

    metal-am.com

    Credit

    US Navy Submarine Industrial Base Program Office; Penn United; VACCO Industries

Watch for

  1. Printed trims for sour gas

    IMI says seven anti-surge valves, which protect gas compressors, at TotalEnergies Denmark now hold disk stacks (the parts that break up the flow inside the valve) printed in a nickel alloy by laser powder bed fusion, the first installed in June 2025. Before that, IMI says, the printed material passed corrosion tests for sour gas, gas containing hydrogen sulphide, and DNV's qualification for printed parts at its highest level (DNV-ST-B203, AMC Level 3).

    Achieved whenTotalEnergies, DNV or another outside party publishes how the printed trims have held up in service, for example after two years.

    processautomation.imiplc.com

    Claimed by

    IMI, case study online in November 2026 (first valve installed June 2025)

Open

  1. 01

    Radiographs of valve castings, labeled

    A public set of digital radiographs (X-ray images) of steel valve-body castings, scanned from films and files that foundries already hold, in which two qualified radiographers working separately outline each flaw, such as gas holes, shrinkage, sand inclusions and cracks, and grade it against the acceptance level the casting was bought to; plus a baseline detection model and a scorecard.

    The brief
    Credit · unclaimed
  2. 02

    Spot fake valves from photos

    A public photo set of genuine and counterfeit valves, showing the places where fakes have been caught (cast or welded logos, nameplates, stem nuts, certification marks, casting details), with a checklist and an image model that flags suspect features, tried blind by the inspectors who check deliveries at plants.

    The brief
    Credit · unclaimed

Open 01 · the brief

Radiographs of valve castings, labeled

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public set of digital radiographs (X-ray images) of steel valve-body castings, scanned from films and files that foundries already hold, in which two qualified radiographers working separately outline each flaw, such as gas holes, shrinkage, sand inclusions and cracks, and grade it against the acceptance level the casting was bought to; plus a baseline detection model and a scorecard.

Why it is still open

The best-known public X-ray set, GDXray+, holds aluminum castings such as car wheels, and its terms allow research use only and forbid redistribution. ASTM sells graded digital reference images for heavy-walled steel castings (E3030-19, 28 images to a volume), but only as licensed comparison images, not as labeled data. Valve Magazine reported in 2011 that standard valve castings are often bought with no radiography at all. Searches of Zenodo and GitHub in November 2026 found no public set of steel valve casting radiographs.

github.comwebstore.ansi.orgvalvemagazine.com

Built with what exists

Archived radiographs from foundries, digitized with a film scanner and stripped of customer names; CVAT for outlining; open detectors such as RetinaNet or YOLO, starting from public code written for GDXray's castings; one graphics card. No new X-ray work is needed.

  1. First step

    Ask one valve foundry for 100 archived radiographs of accepted and rejected castings, with the reports written on them.

  2. Done looks like

    At least 1,500 images from at least five foundries, each labeled by two radiographers, with their agreement reported by flaw type; a baseline model's precision and recall for each flaw type, measured on images from a foundry it never saw in training.

Open 02 · the brief

Spot fake valves from photos

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public photo set of genuine and counterfeit valves, showing the places where fakes have been caught (cast or welded logos, nameplates, stem nuts, certification marks, casting details), with a checklist and an image model that flags suspect features, tried blind by the inspectors who check deliveries at plants.

Why it is still open

The signs are scattered across one-off notices: Valve Magazine's 2009 account of welded-on logos, FM Approvals' 2010 alert on stem nuts and missing nameplates, Batu Valve's May 2026 notice that fakes sold in Yemen and Afghanistan lack its QR verification labels and original casting details, and API's list of false certificates for its valve specifications. Makers' digital nameplates such as ARI-ID give access to product data and, ARI says, cut mix-ups in assembly and shipping, but they do not help a buyer test a fake that carries no code. No public photo set of counterfeit valves was found on Zenodo or GitHub in November 2026.

valvemagazine.combatuvalve.comapi.orgari-armaturen.com

Built with what exists

Phone cameras and a light box; a vision-capable AI model to read nameplates and compare them with each maker's format; CVAT for labeling; a small image classifier; API's Composite List of licensees for certificate checks.

  1. First step

    Gather every published counterfeit valve alert from FM Approvals, API, valve makers and the NRC into one table, with the features each one names.

  2. Done looks like

    At least 500 photos of at least 100 valves, including at least 30 fakes confirmed by makers, certifiers or plants; 10 receiving inspectors judge a mixed blind set with and without the checklist and model, and their hit and false-alarm rates are published.