BRENNEN

Industries / Construction and property / Commercial and residential construction

Steel erection

Steel erection is the trade that assembles a building's structural steel frame on site: it receives the fabricated columns, beams, trusses and deck, lifts each piece into place, connects it with bolts or welds, and keeps the part-built frame and its crews from falling.

1885

The Home Insurance Building in Chicago, designed by William Le Baron Jenney, was completed as a 10-story office building whose metal frame, not its walls, carried its weight. TIME wrote in 1958 that it used wrought-iron beams to the sixth floor and the then new Bessemer steel beams above; the Chicago Architecture Center calls the frame cast iron.

content.time.comarchitecture.org

34

Milestones achieved across 6 domains.

9

To watch for: announced, not yet confirmed outside.

12

Open deliverables. Nobody has shipped them.

In one minute

Where it started

The Home Insurance Building in Chicago, finished in 1885, stood on a metal frame that carried its floors and walls, the kind of skeleton steel-framed buildings still use. Crews raised the pieces with derricks standing on the frame itself, and four-man gangs joined them with red-hot rivets until high-strength bolts, tightened by turning the nut a set amount, took over from the 1950s. Mohawk ironworkers from Kahnawake, near Montreal, have worked on high steel since the 1880s, and after 33 of them died on the Quebec Bridge in 1907 their community spread its crews across many jobs.

Where it stands

In Britain steel took 46.7% of the market for building frames in 2024, and 855,000 tonnes of it were erected, by the count of a survey for the British Constructional Steelwork Association (BCSA). China's steel construction society counted 112 million tonnes of structural steel processed in 2023, as cited by the broker Guojin Securities. Pieces are now drawn, cut and drilled from one 3D model, and some Japanese builders weld columns on site with robots, but connecting, bolting and decking are still done by ironworkers standing on the frame; in one study of 166 US steel erection deaths from 2000 to 2005, falls caused 125.

What is open

Most checks on a steel job are still made by eye: the paint marks that show a nut was turned far enough, the piece marks on steel waiting in the yard, the lean of each column, and whether a part-built frame still has the bracing it needs. The open jobs here are tests and tools that work at a desk or on the ground: photo checks for bolts and piece marks, open stage-by-stage stability checks, a model checker for OSHA's erection rules, wind tests of loose deck, a slip test that gives the same number twice, and bench rigs and test courses for robots that fit beams and fasten deck. None of them needs anyone to work at height.

Domains

AchievedWatch forOpen

Advances to build with

3 research notes

Open in steel erection

3 of 12 open deliverables

Open · Detailing and fabrication

Donor steel read from drawings

A program that reads the archived shop and erection drawings of a steel-framed building due for demolition and writes a reuse inventory: each member's section, length, holes and copes, and where it sits in the frame. It is scored against a hand count of the same drawings.

Built with what exists

Scanned drawing sets from a city archive, a university collection or a demolition contractor; a vision-language model that reads drawings and tables (see the Note "Seven more flagged"); IfcOpenShell to write the inventory as an IFC model; Python.

Credit · unclaimed

Open · Delivery and sequence

Piece marks read by camera

A phone app that photographs steel members lying on dunnage in a yard or on a delivery trailer, reads the painted, stenciled or hand-written piece mark on each, and ticks it off against the piece list for the next erection sequence, flagging any piece that is missing before the crane is booked.

Built with what exists

A phone camera; an open text-recognition model such as PaddleOCR, or a vision-language model; the piece list exported from the detailing model as a spreadsheet; Python.

Credit · unclaimed

Open · Lifting and placing

A robot fits the beam

A bench-scale rig on which a robot arm guides a hanging scale beam onto a column's bolted shear tab (the plate the beam end bolts to) until a drift pin, the tapered pin ironworkers use to line up holes, drops through both holes, and then puts in the first bolt. A person only starts each attempt. The rig stays under 2 m tall and the beam under 5 kg, so no one works at height and no crane is used.

Built with what exists

Hugging Face's LeRobot software for recording and training (see the Note "No download"); a small cobot arm or a low-cost SO-101 arm; two USB cameras; an open robot model such as NVIDIA's GR00T 2, which its maker says learns a task from a few demonstrations (see the Note "Five demonstrations per task"); aluminum angle and plate; a small chain hoist on a 2 m gantry.

Credit · unclaimed

Where it sits