BRENNEN

Industries / Construction and property / Commercial and residential construction

Electrical contracting

Electrical contracting installs and maintains the wiring, panels and electrical equipment in buildings and plants: it prices the work, runs cable and conduit, fits panels and switchgear, tests the result for the inspector, installs solar panels, batteries and car chargers, goes back for repairs, and trains the electricians who do it.

1901

Contractors who wired buildings for bells and electric light formed national associations in the US and in Britain in the same year. The US National Electrical Contractors' Association was formed in Buffalo, New York, on 17 July 1901, with Charles L. Eidlitz of New York City as president and 31 members, by EC&M magazine's history. Britain's association of the same name, founded in 1901 and now called the ECA, describes itself as "the first national body representing electrical contractors".

ecmweb.comeca.co.uk

36

Milestones achieved across 7 domains.

11

To watch for: announced, not yet confirmed outside.

15

Open deliverables. Nobody has shipped them.

In one minute

Where it started

The trade began with wiring for electric bells and then for electric light, and early wiring started fires. Rules followed quickly: Britain's first wiring rules in 1882, and in 1894 an insurers' bureau for testing electrical products, which became Underwriters Laboratories (UL). Electricians formed the union now called the IBEW in 1891, and contractors formed national associations in the US and Britain in 1901.

Where it stands

About 821,000 people worked as electricians in the US in 2025, by O*NET's figures from US Bureau of Labor Statistics data, while a 2025 report led by the training provider JTL counted 158,000 in England in 2024, down from 214,200 in 2018. The International Energy Agency lists electricians among the energy workers in shortest supply, as heat pumps, car chargers and home batteries add work. Software now issues some solar permits, counts symbols on drawings and answers customers' calls, but most of its accuracy figures are the makers' own.

What is open

Much checking is still done by eye or by hand: reading old cable and panel labels, measuring bent conduit, grading apprentices' work, and reading inspection reports. There are no public test sets with answer keys for code questions, load calculations, inspection codes or AI phone agents, so buyers cannot tell how well the new tools work. Phone cameras, open vision and text-reading models, and AI models that read documents put these jobs within reach of a small team, and none of them needs a live circuit.

Domains

AchievedWatch forOpen

Advances to build with

1 research note

Open in electrical contracting

3 of 15 open deliverables

Open · Estimating

Time the labor units

An open table of measured install times for common electrical tasks, timed on unpowered practice rigs at an apprenticeship school. Examples are mounting a box, making up a switch or receptacle, bending and fitting a length of conduit, and pulling wire through a fixed run. Each task is filmed, timed from a set start to a set stop, and repeated by workers of different experience, and the medians are set beside published labor units.

Built with what exists

Training-center practice booths with no power connected; phone cameras; open video tools or a spreadsheet to mark start and stop times; the school's own task sheets.

Credit · unclaimed

Open · Wiring and conduit

Read cable markings by camera

A phone app that reads the printed or embossed markings on old house cable and names what it is: copper, aluminum or copper-clad aluminum NM cable, cloth-jacketed NM, armored cable, or knob-and-tube. It is trained and tested only on salvaged, disconnected cable offcuts and on photos of exposed cable runs; nobody opens a box or touches a circuit.

Built with what exists

A phone camera and a clip-on LED for low-angle light; an open text-reading (OCR) model and an open vision-language model; salvaged cable from renovation tear-outs or scrap dealers.

Credit · unclaimed

Open · Panels and switchgear

Name the panel from photos

An open, labeled set of photos of closed home panels and their door labels, sorted by maker and product line (for example Federal Pacific Stab-Lok, Zinsco, Challenger, Pushmatic, and current Square D, Siemens, Eaton and GE lines), and a model that names the maker and line from a photo and flags lines with a known history of problems. Photos are taken with the cover on, or of salvaged panels at recyclers and training schools; no cover comes off a live panel.

Built with what exists

Phone photos gathered with permission from home inspectors and from salvaged panels; an open object detector such as YOLO; an open vision-language model to read label text.

Credit · unclaimed

Where it sits