Industries / Construction and property / Commercial and residential construction
Drywall
Drywall is the trade that frames interior walls and ceilings with thin steel or wood studs, covers them with gypsum board, and tapes and sands the joints smooth for paint, including the fire-rated walls, soundproof walls and suspended ceilings inside most modern buildings.
1916
From October 1916, at Fort Dodge, Iowa, the United States Gypsum Company (USG) made single-layer panels of gypsum plaster faced with paper that could be joined flush along a wall, and in 1917 it named them Sheetrock. USG's own history page dates the Sheetrock panel to 1917, and calls it the first wallboard panel; Augustine Sackett had patented a layered board of paper and plaster in 1894.
39
Milestones achieved across 7 domains.
7
To watch for: announced, not yet confirmed outside.
16
Open deliverables. Nobody has shipped them.
In one minute
Where it started
Before board, inside walls were wet plaster spread over wood strips called lath, and in 1740 a London surveyor was already pricing plasterers' work by the square yard. Paper-faced gypsum board was on sale from the 1910s, but plaster stayed the usual wall until World War II, when barracks and bases had to be built fast with too few workers. Builders kept using board after the war, and screws, steel studs and machine taping tools followed in the 1940s and 1950s.
Where it stands
By Global Gypsum magazine's count, in mid-2023 the world could make 14.3 billion m² of gypsum wallboard a year in 435 plants in 72 countries, nearly half of it in the US and China, and Knauf, Beijing New Building Materials and Saint-Gobain are the largest makers. The US Bureau of Labor Statistics counts about 102,200 drywall and ceiling tile installers and 15,800 tapers in the US, and in a September 2026 survey 49% of US home builders reported a shortage of drywall workers. Robots now spray and sand joint compound on some paying jobs, but framing, hanging and taping are still done by hand.
What is open
Much of the trade's quality is checked by eye just before the next layer hides it: stud thickness, screw spacing on fire-rated walls, screws that bridge a sound wall's springy channel, the bracing above a ceiling. Open jobs include robots that stand studs, fasten board and lay tape, each measured against a person; public answer keys for reading wall types and board heights off drawings; and independent tests of low-dust compounds, of when a coat is dry, and of how much of a skip is gypsum.
Domains
AchievedWatch forOpen
Domain
Progress
Last achieved
Watch for
Open
Framing
Framing is building the skeleton of thin steel or wood studs, set in floor and ceiling tracks along lines marked on the floor, that interior walls are hung from.
4 · 0 · 2
Last achievedPartitions that slide in quakes2023
2
openHanging board
Hanging is the work of cutting gypsum board to size, lifting it into place and fastening it to the wall framing with screws, nails or adhesive.
7 · 1 · 3
Last achievedRobots hang board in labs2018
Watch forRobots taught by plain text
3
openTaping and finishing
Taping and finishing is the work of hiding the joints and screw heads between boards with paper or mesh tape and coats of joint compound, then sanding them smooth for paint.
4 · 1 · 3
Last achievedFinish rules for glass mat2015
Watch forFinishing robot claims triple speed
3
openCeilings
This is the work of hanging a ceiling below the floor or roof above, either a metal grid that holds loose lay-in panels or a frame that gypsum board is screwed to.
5 · 1 · 2
Last achievedJapan makes ceiling rules law2013
Watch forRobots fix ceiling boards
2
openFire and sound walls
This is the work of building walls that hold back fire for a rated time, or keep noise from passing between rooms, by following a tested design layer for layer and screw for screw.
7 · 1 · 2
Last achievedMissing walls between flats2018
Watch forFire tests modeled first
2
openEstimating
Estimating is working out, before the bid, how much board, framing, fasteners, tape and compound a job needs and how many hours it will take, and turning those quantities into a price.
6 · 2 · 2
Last achievedStuds counted from model walls2020
Watch forWall types read from plans
2
openDust and waste
This is what the work puts into the air and into the skip: dust from cutting and sanding board and joint compound, and offcuts and old board that must go somewhere.
6 · 1 · 2
Last achievedRecycled board meets the standard2017
Watch forAustria closes the gypsum loop
2
open
Advances to build with
2 research notes

NVIDIA GR00T 2
Five demonstrations per task
By NVIDIA's own test, its robot model GR00T 2 averages 95% success after five demonstrations of a task, on 50 tasks picked from those it learns that way.

Muse Ember
The jobs agents repeat
Meta's Muse Ember matched Claude Haiku 5.5 on an outside firm's tests at a third of the cost per task, though both list the same prices for text in and out.
Open in drywall
3 of 16 open deliverables
Open · Framing
Robot stands studs in track
A robot arm on a wheeled base that takes cut studs from a cart, stands each one in the floor and ceiling track at the marked layout, twists it into place and drives one screw at the bottom track, leaving the top free as in a slip track. Test it on a full-height mock partition in a workshop, with the tracks already fixed to a bench frame, so no powder-actuated tools are involved.
Built with what exists
A collaborative arm with about 1.3 m reach, such as a Universal Robots UR10e or UR20, on a mobile base; an Intel RealSense depth camera; printed ArUco markers or the layout lines on the floor for position; a cordless screw gun on a tool mount; ROS 2 with MoveIt 2, or a policy trained from a few demonstrations (see the Note "Five demonstrations per task").
Open · Hanging board
Score a robot's screws
A bench test that measures how well a robot fastens board, not only whether it can. A collaborative robot arm, the kind built to work near people, drives drywall screws through boards held on a steel-stud mock wall inside a fenced work cell. Every screw is scored: whether it hit the stud, whether its head sits just below the paper face without tearing it, and whether it is at the spacing the board maker's instructions give. Three working hangers fasten the same wall as the baseline.
Built with what exists
A collaborative arm such as a Universal Robots UR10e; a drywall screw gun with a depth-setting nosepiece; a camera to find stud lines marked on the board; ROS 2 with the MoveIt motion planner; steel studs and 1/2 in board; a phone camera for close-ups of each screw head.
Open · Taping and finishing
Robot lays joint tape
A robot arm that lays paper tape bedded in joint compound along a flat seam between two boards on a bench wall, tested against a finisher on the same wall.
Built with what exists
A low-cost SO-101 arm on a vertical rail, as in WallFin, an open-source drywall sanding robot released under the Apache-2.0 license in October 2026, or a collaborative arm such as a UR10e; a hand taping tool that wets paper tape with compound as it feeds, of the kind Fine Homebuilding calls a banjo; the open LeRobot software to train the arm from recorded demonstrations (see the Note "Five demonstrations per task"); a camera to find the seam.