Industries / Construction and property / Commercial and residential construction / Drywall
Dust and waste
This is what the work puts into the air and into the skip: dust from cutting and sanding board and joint compound, and offcuts and old board that must go somewhere.
6
Milestones achieved, from 1979 to 2017.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1979
Asbestos found in taping dust
A. Fischbein, A. N. Rohl, A. M. Langer and I. J. Selikoff estimated that some 75,000 US construction workers worked in drywall, and found that air in tapers' breathing zones while they sanded taping compounds held asbestos fibers at several times the US government limit; a clinical survey of drywall workers suggested asbestos disease could be an important hazard in the trade. In 1980 D. K. Verma and C. G. Middleton measured the same in Alberta, Canada, and found sanding the most hazardous step, ahead of mixing and sweeping. The legacy reaches today's waste: Metro Vancouver tells owners that tape and compound used until about 1990 may contain asbestos and must be tested before the board can be recycled.
LessonWhatever goes into a compound comes out at the sander, so the recipe is a health decision.
Credit
Fischbein, Rohl, Langer and Selikoff (American Industrial Hygiene Association Journal, 1979); Verma and Middleton (1980)
1985
Old board made into new
Tony and Gwen McCamley founded New West Gypsum Recycling in 1985 to grind waste drywall, strip the paper and sell the gypsum back to board makers, in response to a ban on gypsum at landfills in the Vancouver region. Metro Vancouver has licensed its New Westminster plant since December 1997. The company says it has recycled more than 5 million tonnes of gypsum, a figure it gives itself.
Credit
Tony and Gwen McCamley; New West Gypsum Recycling; Metro Vancouver
1995
Landfill gas closes a site
Drywall is about 90% gypsum, calcium sulfate. Wet and without air in a landfill, bacteria turn the sulfate into hydrogen sulfide, a gas that smells of rotten eggs at as little as 0.5 parts per billion. Qiyong Xu and Timothy Townsend of the University of Florida record that the Sunset Sand Mine and Landfill in central Florida, which took construction and demolition debris, closed in 1995 largely because of hydrogen sulfide in nearby neighborhoods, whose residents were evacuated twice; a 2000 study found the gas above such a landfill ranging from 3 ppb to above 50 ppm.
LessonBoard that is harmless on a wall can make a toxic gas once it is buried wet.
Credit
Xu and Townsend, University of Florida
2005
Plasterboard gets its own cell
A Council of the European Union decision of 19 December 2002 says non-hazardous gypsum-based waste should go only to landfills for non-hazardous waste, in cells where no biodegradable waste is accepted. The trade paper letsrecycle.com reports that landfilling gypsum with biodegradable waste was banned in 2005. The Environment Agency, which regulates landfills in England, dropped a rule in 2008 that had let construction waste with up to 10% gypsum skip separation, and in April 2021 reminded waste holders that mixed waste containing gypsum must go to a cell with no biodegradable waste, after testing.
Credit
Council of the European Union (Decision 2003/33/EC); Environment Agency (England)
2009
Best tool, least used
Respirable dust is the fine fraction that reaches deep into the lungs. In a laboratory study with 16 people, D. E. Young-Corbett and M. A. Nussbaum found that a ventilated sander, which pulls dust into a vacuum at the sanding head, cut respirable dust by 88% compared with a hand block sander, a pole sander by 58% and a wet sponge by 60%. Their telephone survey of 264 of the 857 member firms of the Finishing Contractors Association and the Association of the Wall and Ceiling Industries found that respirators were the control used most often, and named usability, productivity and cost as barriers to the better tools.
LessonKnowing which tool works does not make crews use it.
Credit
Young-Corbett and Nussbaum (Journal of Occupational and Environmental Hygiene, 2009)
2017
Recycled board meets the standard
In the EU-funded Gypsum to Gypsum project, plants made plasterboard with 17% to 28% recycled gypsum, and 86% of the boards tested met the European board standard EN 520. Only 56% of the recycled gypsum samples met the project's own quality guidelines; for several, the failures were moisture and organic matter that, the authors say, a well-run chain of careful dismantling, separate collection and recycling could have corrected. Ana Jiménez-Rivero and Justo García-Navarro of the Technical University of Madrid, reporting the results, cite an estimate that about 1.9 million tonnes of plasterboard waste arose in the EU in 2013, of which only 12.7% was recovered.
LessonRecycled gypsum is only as clean as the job site that separated it.
Credit
Gypsum to Gypsum project (EU LIFE+ programme, LIFE11 ENV/BE/001039); Jiménez-Rivero and García-Navarro
Watch for
Austria closes the gypsum loop
A plant at Stockerau run by GzG Gipsrecycling, a joint venture of the builder PORR, Saint-Gobain and the waste firm Saubermacher, opened in October 2025 with a capacity of 60,000 tonnes a year, and the partners call it Austria's first gypsum-to-gypsum recycling plant. Its recycled gypsum goes to Saint-Gobain's board plant at Bad Aussee, where, the partners say, "up to 40 per cent of the recycled material can be used" to make new board, ahead of a coming Austrian ban on landfilling gypsum.
Achieved whenAn Austrian authority or an independent auditor publishes the tonnes the plant has recycled in a year and the recycled share in Bad Aussee's boards.
Claimed by
Saubermacher, PORR and Saint-Gobain, October 2025
Open
01
Test low-dust compounds independently
An open, repeatable bench test of the dust given off when sanding standard joint compounds and those sold as low-dust or dust-control, from several makers, all sanded the same way by a jig in a sealed box, with results published as respirable dust per gram of compound removed.
The briefCredit · unclaimed02
Gypsum share from skip photos
A phone tool that estimates what share by weight of a mixed construction-waste skip is plasterboard, from a few photos of the load, and a published test against hand sorting and weighing, so a site can tell whether a load must go to a separate landfill cell.
The briefCredit · unclaimed
Open 01 · the brief
Test low-dust compounds independently
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
An open, repeatable bench test of the dust given off when sanding standard joint compounds and those sold as low-dust or dust-control, from several makers, all sanded the same way by a jig in a sealed box, with results published as respirable dust per gram of compound removed.
Why it is still open
The comparisons found are the makers' own. National Gypsum's US patent 9,115,027 (2015, for its ProForm line) sanded its own compound and USG's and LaFarge's low-dust products in a small enclosure and reported peak readings on a DustTrak aerosol monitor, of about 33 to 56 mg/m³ in the examples read. USG hired RJ Lee Group to measure dust and silica while its own Dust Control compound was sanded in a closed room, a test of one product rather than a comparison. NIOSH's 1994 study of vacuum sanders and Young-Corbett and Nussbaum's 2009 study compared sanding tools, not compounds. This research found no independent comparison.
Built with what exists
Compounds bought new from stores; a random-orbit sander on a linear rail with a fixed weight on it, so pressure and strokes are the same every run; a sealed glove-port box with a HEPA-filtered exhaust; a sampling pump with a respirable-dust cyclone and filter cassettes, weighed on a microbalance; a real-time monitor, such as a TSI DustTrak or a low-cost Sensirion SPS30 sensor; a P100 half-mask respirator for whoever opens the box.
First step
Build the box and jig, then sand one standard compound five times to measure how much runs differ.
Done looks like
At least four standard and four low-dust compounds from at least three makers, five runs each, with respirable dust per gram removed and its spread published for each, along with the jig drawings and raw data.
Open 02 · the brief
Gypsum share from skip photos
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A phone tool that estimates what share by weight of a mixed construction-waste skip is plasterboard, from a few photos of the load, and a published test against hand sorting and weighing, so a site can tell whether a load must go to a separate landfill cell.
Why it is still open
The EU rule and England's 2021 guidance require gypsum to be kept separate, or mixed loads holding it to be tested and sent to special cells. Diani Sirimewan and colleagues at Monash University released CDW-Seg in 2025, 430 photos of skip bins on Melbourne building sites with 5,413 objects outlined in ten classes, plasterboard among them, and their model picked out plasterboard well; it labels what shows on the surface of a load, by pixel area. Castro-Díaz and colleagues separated plasterboard from wood, plastic and mortar by hyperspectral imaging at laboratory scale in 2023. This research found no tool that turns photos of a load into a share by weight checked against sorting and weighing.
Built with what exists
The CDW-Seg photos and labels as a starting set; a phone camera; an open segmentation model such as a YOLO-family model, or a vision-language model; a platform scale; cut-resistant gloves and safety glasses; skips from new-build sites only, so no board or compound from before 1990, which may hold asbestos, is handled.
First step
Ask one drywall contractor for three skips of offcuts and packaging from a new build, photograph each from four sides, then sort and weigh them.
Done looks like
40 skips photographed and then hand-sorted and weighed, with the tool's gypsum share within 5 percentage points of the weighed share for at least 30 of them, published with the photos and weights.