Industries / Construction and property / Commercial and residential construction / Drywall
Estimating
Estimating is working out, before the bid, how much board, framing, fasteners, tape and compound a job needs and how many hours it will take, and turning those quantities into a price.
6
Milestones achieved, from 1740 to 2020.
2
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1740
Plaster priced by the yard
In The Concise Practical Measurer (second edition, London, 1740), the surveyor Thomas Miles wrote that plasterers' work "is measured by the Yard Square, containing nine superficial feet". His worked example takes a ceiling 18 by 16 ft, 288 sq ft, deducts the chimney breast and divides by nine to get 30 yards and 8 ft of lathing; cornices were measured with a line around their profile and priced by the foot. Wall and ceiling linings are still measured and priced by surface area.
Credit
Thomas Miles
1965
Rooms figured solid
USG's Gypsum Drywall Construction Handbook (4th edition, 1965) told estimators to scale each room's length, width and ceiling height off the plan, and said door and window openings are "frequently 'figured solid'", that is, not deducted, except for large ones. It printed a "Rapid Room Measure Table" giving the board area of four walls and a ceiling for rectangular rooms with 8 ft ceilings, and a table of joint materials by board area: for 500 sq ft of board, 3 gallons of ready-mixed compound and three 60 ft rolls of tape. It advised using the longest practical boards to keep butt joints, where the square-cut ends of two boards meet, "to a minimum".
Credit
United States Gypsum Company
1995
New Zealand's plasterboard rules
NZS 4202:1995, New Zealand's standard method of measurement for building works (first published in 1951 as NZS 670), gives plasterboard linings their own section. Board is scheduled in square meters by type and location, with the number of layers stated for multilayer linings; stopping, the taping and filling of joints, is listed separately for each finish; openings are deducted only when they are 1.0 m² or larger; and strips 300 mm wide or less are measured in meters.
Credit
Standards New Zealand
2003
Japan sets one measuring rule
Japan's Public Building Quantity Surveying Standard (Kōkyō kenchiku sūryō sekisan kijun), set by a Ministry of Land, Infrastructure, Transport and Tourism (MLIT) notice of 31 March 2003 and last revised on 29 March 2023, fixes how quantities are measured for government buildings. Finishes are measured as surface area minus openings, but openings of 0.5 m² or less are not deducted; wall height is taken as the ceiling height in the design documents; steel stud partitions are separated by stud width and spacing; and a fire-rated partition of steel studs and board is measured as the area of one face, which covers the framing and the boards on both sides. Board joints are not measured separately.
LessonThe same wall gives different quantities under different rules, so a quantity means little unless its measuring rule is stated.
Credit
MLIT Government Buildings Department
2005
Takeoff from online plans
On 16 December 2005 On Center Software, of The Woodlands, Texas, and iSqFt, an online plan room company in Cincinnati, released iSqFt Takeoff, built on On Center's On-Screen Takeoff. Estimators could measure lengths, counts and areas directly on electronic drawings posted for bidding, "without the need to work with bulky blueprints", and keep an audit trail of every measurement for review before or after the bid. On Center, formed in 1988 and part of ConstructConnect since 2016 by its own account, calls On-Screen Takeoff "the first digital takeoff software for the preconstruction industry"; that is its own claim, and the product's launch year was not confirmed.
Credit
On Center Software; iSqFt
2020
Studs counted from model walls
Chavanont Khosakitchalert, Nobuyoshi Yabuki and Tomohiro Fukuda of Osaka University reported in 2019 and 2020 that building information models (BIM, 3D models that carry data about each part) give wrong layer quantities when a wall is drawn as one element with material layers, partly because regions that overlap other elements add excess material. A 2020 paper of theirs noted that when design-stage models leave out the studs, subcontractors cannot take off framing from them, and published a method that subtracts overlapping elements and works out the framing for each drywall partition. On an actual construction project it took 282 seconds and came within 0.11% to 0.30% of a baseline count, by the authors' own test in a peer-reviewed journal.
LessonA design model is not an order list until someone checks what each wall is made of.
Credit
Khosakitchalert, Yabuki and Fukuda (Osaka University)
Watch for
Wall types read from plans
ConstructConnect says that since an update of 3 August 2026, the Auto Takeoff feature (formerly Takeoff Boost) in its On-Screen Takeoff software reads the wall-type tag on each wall, finds the matching partition detail elsewhere in the drawing set, and records for each type the layers of board on each side, the board type, the stud gauge and wall thickness, and the sound rating (STC). Its help pages say estimators must still review every result and enter wall heights themselves, and they give no accuracy figure for reading wall types. A 2025 study by the same company reports walls and other standard items captured "up to 95% faster" than by hand.
Achieved whenAn outside party publishes, for named drawing sets, the share of walls given the right type and layers, checked against an estimator's reading.
help.constructconnect.comhelp.constructconnect.comconstructconnect.com
Claimed by
ConstructConnect, August 2026
Markups saved as training data
In a July 2026 preprint, Michael Edlin describes a takeoff screen inside a working estimating system for finishes (US Division 9 work, which includes drywall) that saves the shapes an estimator draws, the finish assigned and later corrections as labeled rows for training AI models, with no separate labeling step. After the first week of capture, on 11 July 2026, its counters showed 681 rows, 23 certified and 658 provisional, across 4 projects; the author calls these early counts, not a dataset.
Achieved whenA corpus of certified rows is released, or a model trained on it is tested by someone else against estimators' takeoffs.
Claimed by
Michael Edlin, July 2026
Open
01
Answer key for wall types
A public set of partition schedules, the sheets in a drawing set that define each wall type behind a short tag such as "A1", transcribed field by field: board layers and type on each side, stud depth, gauge (steel thickness) and spacing, how high the board runs (to the ceiling, past it, or to the deck above), fire-test design number and sound rating. Link each tagged wall on the floor plans to its type, and publish a script that scores any tool or AI model on reading the schedule and on matching walls to types.
The briefCredit · unclaimed02
Score board heights from drawings
A public answer key of how tall the board is on each side of every wall in a set of drawings, worked out by estimators from the reflected ceiling plan (the ceiling layout, drawn as if seen in a mirror on the floor), the building sections and the height note on each wall type, such as "to deck" or "6 in above ceiling", and a test of how close takeoff tools and AI models come, with the board area their errors add or remove.
The briefCredit · unclaimed
Open 01 · the brief
Answer key for wall types
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public set of partition schedules, the sheets in a drawing set that define each wall type behind a short tag such as "A1", transcribed field by field: board layers and type on each side, stud depth, gauge (steel thickness) and spacing, how high the board runs (to the ceiling, past it, or to the deck above), fire-test design number and sound rating. Link each tagged wall on the floor plans to its type, and publish a script that scores any tool or AI model on reading the schedule and on matching walls to types.
Why it is still open
ConstructConnect's August 2026 wall-type reader gives no accuracy figures. The public drawing benchmarks found do not cover wall types: AECV-Bench (January 2026) tests counting of doors, windows, bedrooms and toilets on 120 floor plans, where many models scored only 0.40 to 0.55, against up to 0.95 for reading text; DrawingVQA (July 2026) uses 33 structural drawings and leaves architectural sheets out. Searches of Hugging Face and GitHub in November 2026 found floor plan image sets and drywall calculators, but no labeled partition schedules.
Built with what exists
Drawing sets that public owners post with their bid invitations; PyMuPDF to pull text and lines from the PDFs; a spreadsheet template for the fields; general vision-language models and commercial takeoff tools as the systems to score (see the Note "The jobs agents repeat").
First step
Download 10 public bid drawing sets that include a partition schedule, and transcribe the wall types of one, with a second person checking.
Done looks like
300 wall types from at least 50 projects, each transcribed independently by two estimators, with their agreement reported field by field; 2,000 tagged wall segments linked to their types; and published per-field scores for at least three tools.
Open 02 · the brief
Score board heights from drawings
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public answer key of how tall the board is on each side of every wall in a set of drawings, worked out by estimators from the reflected ceiling plan (the ceiling layout, drawn as if seen in a mirror on the floor), the building sections and the height note on each wall type, such as "to deck" or "6 in above ceiling", and a test of how close takeoff tools and AI models come, with the board area their errors add or remove.
Why it is still open
Tools now claim to read heights but publish no accuracy for them. ConstructConnect's Takeoff Boost reads floor plans and reflected ceiling plans and replaces a default height with any height callout it finds, yet its April 2026 post says estimators "still review, tweak wall heights", and its help pages tell users to update the heights of the wall items it creates. Civils.ai says it takes heights "strictly from your plans/specs; no height inference". A November 2026 search found no study that reads board heights from sections; an open GitHub project, GumbyEnder/rcp-fixture-detector, counts light fixtures on ceiling plan PDFs but reads no heights.
Built with what exists
Public bid drawing sets that include sections and ceiling plans; PyMuPDF for vector text and lines; a vision-language model to read height notes and ceiling heights (see the Note "The jobs agents repeat"); a short script that joins each wall's tag, its room's ceiling height and the deck height from the sections; commercial takeoff tools as systems to score.
First step
Take one public school or office drawing set, work out board heights for 50 walls by hand, and note which sheets each answer came from.
Done looks like
20 drawing sets and at least 1,500 wall segments with heights worked out by two estimators; each tool's share of segments within 150 mm (6 in) of the estimators' height, and the resulting error in total board area for each project, all published.