BRENNEN

Industries / Construction and property / Commercial and residential construction / Drywall

Hanging board

Hanging is the work of cutting gypsum board to size, lifting it into place and fastening it to the wall framing with screws, nails or adhesive.

7

Milestones achieved, from 1940s to 2018.

1

To watch for: announced, not yet confirmed outside.

3

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1940s

    War work favors board

    In a 2006 history for Walls & Ceilings, Dave Darnutzer writes that gypsum board had been on sale since the 1910s, but that wood lath covered in plaster stayed the main way to make walls for about another 23 years. That changed in World War II, when the US government had to build barracks and whole bases quickly with too little labor and material. Builders who had got used to "slapping up drywall" did not go back to plaster in the postwar boom in tract housing, and finishers could complete a house in a few days, at about one day of drying per coat.

    wconline.com

    Credit

    US wartime builders; account by Dave Darnutzer

  2. 1958

    Germany makes board systems

    By Knauf's own history, the company began producing gypsum boards at Iphofen, in Bavaria, in 1958, and a few years later developed drylining systems, in which boards are fixed to a frame or wall in place of wet plaster. It went on to sell the parts that go with the board: processing components, special tools and metal profiles for walls and ceilings.

    careers.knauf.co.uk

    Credit

    Knauf

  3. 2000

    Hanging injuries counted

    NIOSH researchers analyzed US Bureau of Labor Statistics data on injuries that kept drywall installers away from work from 1992 to 1995. Installers were at high risk of overexertion and of falls to a lower level; more than 40% of the injured had sprains, strains or tears; the trunk was the body part most often hurt, and more than a third of trunk injuries happened while handling solid building materials, mainly drywall.

    LessonThe heaviest part of hanging is moving the board, so the weight of the board is a safety question.

    eutils.ncbi.nlm.nih.gov

    Credit

    S. S. Chiou, C. S. Pan and P. Keane, Division of Safety Research, National Institute for Occupational Safety and Health (NIOSH), Morgantown, West Virginia

  4. 2005

    Wet rooms lose paper board

    In 2005 the International Code Council withdrew its approval of greenboard, a paper-faced board with a moisture-resistant core, as a backer for tile in wet areas, Architect magazine reported in 2007. Board makers answered a run of mold problems at commercial buildings in Florida and other humid places with boards faced with glass-fiber mat instead of paper, such as Georgia-Pacific's DensArmor Plus, and with paperless boards such as USG's FiberRoc AquaTough. Pro Builder put their cost at 30% to 50% above ordinary board in 2007, and noted that "mold-resistant does not mean mold-free": the usual rating comes from ASTM D3273, a test in a humid chamber.

    LessonPaper is food for mold, so the face of a board, not only its core, decides where it can be hung.

    architectmagazine.comprobuilder.com

    Credit

    International Code Council; Georgia-Pacific; USG

  5. 2010

    Lighter board goes on sale

    On 28 July 2010 USG announced Sheetrock UltraLight Panels, 1/2 in (12.7 mm) board that it said was up to 30% lighter than competing board and met the ASTM C1396 standard for gypsum board. USG cited a survey by Ducker Research in which more than half of contractors named weight as one of the most important features of a board. JLC reported that the panels cost about 10% more than standard Sheetrock. Lighter fire-rated board followed: in April 2025 National Gypsum said its EVOLVE 30 board is up to 30% lighter than its 5/8 in (15.9 mm) Fire-Shield board, for 30-minute and non-rated walls, and its Type X EVOLVE X up to 20% lighter. The weight figures are the makers' own.

    prnewswire.comjlconline.comnationalgypsum.com

    Credit

    USG; National Gypsum

  6. 2014

    Back claims fall, care moves

    A study of 24,830 union carpenters in Washington State from 1989 to 2008, 5,073 of them drywall installers, found that installers had more work-related overexertion back injuries than other carpenters (an adjusted rate ratio of 1.63). Those injury rates, counted from workers' compensation claims, fell over the period for both groups. But visits for back disorders paid by the union's private health insurance rose after the mid-1990s.

    LessonA fall in compensation claims can mean that workers sought care elsewhere, not that their backs were safer.

    eutils.ncbi.nlm.nih.gov

    Credit

    Ashley Schoenfisch, Hester Lipscomb and colleagues (Duke University and the University of North Carolina), in the American Journal of Industrial Medicine

  7. 2018

    Robots hang board in labs

    In 2018 AIST, Japan's national institute of industrial science, showed HRP-5P, a humanoid robot 182 cm tall and weighing 101 kg, installing gypsum board on its own at a mock-up of a house under construction. It slid one board, 1820 × 910 × 10 mm and about 11 kg, off a stack, carried it to the wall, stood it up, picked up a screwdriving tool and, bracing itself with a furring strip, screwed the board to the wall; Engadget's report at the time noted that it moved cautiously. In a 2024 journal paper, a University of Michigan team had an industrial robot arm install drywall in a laboratory set up like a site, working from the building model while a human co-worker stepped in when the plan did not match what was built. Neither account reports use on a paying job.

    aist.go.jpengadget.comarxiv.org

    Credit

    Fumio Kanehiro, Kenji Kaneko, Takeshi Sakaguchi and the Humanoid Research Group, AIST; Xi Wang, Hongrui Yu, Wes McGee, Carol Menassa and Vineet Kamat, University of Michigan

Watch for

  1. Robots taught by plain text

    A University of Michigan team says its method teaches construction robots new tasks from crowdsourced instructions written in plain language, with a large language model and data drawn from the building model, and that in a long drywall installation experiment with a full-scale industrial robot arm it achieved "multi-task reprogramming with minimal effort and high quality". The paper was posted as a preprint under review.

    Achieved whenThe paper passes peer review with its measured results, and a robot taught this way hangs board outside the laboratory, with sheets placed, fasteners checked and human interventions counted and published.

    arxiv.org

    Claimed by

    Hongrui Yu, Vineet R. Kamat and Carol C. Menassa, September 2025

Open

  1. 01

    Score a robot's screws

    A bench test that measures how well a robot fastens board, not only whether it can. A collaborative robot arm, the kind built to work near people, drives drywall screws through boards held on a steel-stud mock wall inside a fenced work cell. Every screw is scored: whether it hit the stud, whether its head sits just below the paper face without tearing it, and whether it is at the spacing the board maker's instructions give. Three working hangers fasten the same wall as the baseline.

    The brief
    Credit · unclaimed
  2. 02

    Injuries after lighter board

    An analysis of whether US drywall installers' overexertion injuries fell after lightweight board went on sale in 2010, using public national injury survey data, with carpenters as the comparison group.

    The brief
    Credit · unclaimed
  3. 03

    Motion sensors on real hangers

    A field study, with crews' consent, that puts small motion sensors on drywall hangers' upper backs and upper arms while they hang standard 1/2 in board on some days and lightweight board on others, and reports how long each sheet keeps them bent at the trunk or with arms raised.

    The brief
    Credit · unclaimed

Open 01 · the brief

Score a robot's screws

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A bench test that measures how well a robot fastens board, not only whether it can. A collaborative robot arm, the kind built to work near people, drives drywall screws through boards held on a steel-stud mock wall inside a fenced work cell. Every screw is scored: whether it hit the stud, whether its head sits just below the paper face without tearing it, and whether it is at the spacing the board maker's instructions give. Three working hangers fasten the same wall as the baseline.

Why it is still open

Robots have hung board in laboratories, AIST's HRP-5P humanoid in 2018 and a University of Michigan industrial arm in a 2024 paper, but the published accounts describe carrying, positioning and workflow and give no count of fastener quality. Canvas's 2018 patent application describes robots that can "cut drywall, hang drywall, apply tape and mud, sand", while the machine Canvas sells sprays and sands joint compound. This research found no published tally of screw depth or stud hits for any hanging robot.

aist.go.jparxiv.orgpatents.google.com

Built with what exists

A collaborative arm such as a Universal Robots UR10e; a drywall screw gun with a depth-setting nosepiece; a camera to find stud lines marked on the board; ROS 2 with the MoveIt motion planner; steel studs and 1/2 in board; a phone camera for close-ups of each screw head.

  1. First step

    Build one 2.4 m (8 ft) stud wall section on a bench, film a hanger driving 100 screws, and write the scoring rules from those 100.

  2. Done looks like

    500 screws driven by the robot and 500 by people into the same mock wall, each scored as in the stud or not, set right, driven too deep (paper torn) or left proud, published with the time per sheet for both.

Open 02 · the brief

Injuries after lighter board

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An analysis of whether US drywall installers' overexertion injuries fell after lightweight board went on sale in 2010, using public national injury survey data, with carpenters as the comparison group.

Why it is still open

The outside studies this research found end in 1995 for national data (Chiou and colleagues) and in 2008 for Washington State union carpenters (Schoenfisch and colleagues). USG's 2010 launch cited surveys of contractors and distributors about weight, not injury data. This research found no study of installers' injuries after the switch to lighter board.

eutils.ncbi.nlm.nih.govprnewswire.com

Built with what exists

The Bureau of Labor Statistics' Survey of Occupational Injuries and Illnesses, case and demographic data, for drywall and ceiling tile installers (occupation code 47-2081) and carpenters (47-2031); makers' press releases for the dates each lightweight board reached the market; Python with pandas and statsmodels.

  1. First step

    Download the survey's case and demographic tables for the two occupation codes and list which years give rates as well as counts.

  2. Done looks like

    A published table, for every year the survey covers before and after 2010, of days-away-from-work cases by event (overexertion, falls) for both occupations, and an interrupted time-series estimate, with a confidence interval, of the change for installers after 2010 relative to carpenters.

Open 03 · the brief

Motion sensors on real hangers

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A field study, with crews' consent, that puts small motion sensors on drywall hangers' upper backs and upper arms while they hang standard 1/2 in board on some days and lightweight board on others, and reports how long each sheet keeps them bent at the trunk or with arms raised.

Why it is still open

Board handling has been measured in laboratories: Eilertsen, Merryweather and Roundy found in 2018 that an unpowered lift-assist device cut mean back and trunk muscle activity by 69% for 10 participants, and Yuan and colleagues at the University of Massachusetts Lowell estimated installers' back and shoulder loads in 2016 from observed postures fed into a model. A 2016 field study measured a ceiling task. This research found no field measurement of wall hanging that compares board weights.

api.semanticscholar.orgeutils.ncbi.nlm.nih.gov

Built with what exists

Wearable inertial measurement units (small sensors that record angle and motion), or phones in armbands running a sensor-logging app; a tally of sheets hung per hour; Python to turn angles into time spent above set thresholds.

  1. First step

    Ask one drywall contractor and crew for consent, and record two days of one hanger wearing three sensors to check that the angles read correctly.

  2. Done looks like

    Three crews over ten working days each, half on each board type, with the published minutes per sheet of trunk bending beyond 45 degrees and of upper-arm raising beyond 90 degrees, with confidence intervals.