Industries / Transport and vehicles / Maritime and shipping
Offshore supply vessels
Offshore supply vessels are the boats that carry cargo, fuel, water, drilling fluids, crews and equipment between shore bases and offshore platforms, drilling rigs and wind farms, and that tow floating rigs and set their anchors.
1955
Ten investors in Louisiana built the Ebb Tide, a 119 ft (36 m) boat that Alden J. "Doc" Laborde designed to serve offshore rigs, with the wheelhouse at the bow and an open cargo deck behind it; Tidewater, the company they formed, calls it "the world's first oil and gas service vessel.".
42
Milestones achieved across 7 domains.
8
To watch for: announced, not yet confirmed outside.
14
Open deliverables. Nobody has shipped them.
In one minute
Where it started
The first offshore rigs in the Gulf of Mexico were served by war-surplus landing craft that Doc Laborde called "thin-skinned and under-powered." His Ebb Tide of 1955 put the bridge forward and a long open deck aft, so the captain could back the stern up to a rig and hold it there, and that layout became the definition of a supply vessel in IMO's rules. From the 1970s the North Sea demanded bigger and tougher boats, and anchor handlers that could tow floating rigs and lay their anchors in deep water.
Where it stands
Westwood Global Energy counted 3,209 offshore support vessels at work and 377 laid up at the end of 2025, down from more than 1,500 laid up in the COVID-19 slump; more than half the working fleet is over 15 years old and 216 vessels were on order. Tidewater, the largest operator, owned 208 vessels with an average age of 13.1 years. Wind farms now hire their own types, service operation vessels where technicians live for weeks and small crew boats, while in Norway many supply vessels run on batteries and plug into shore power at their bases.
What is open
Much of what the industry knows about itself sits in paid databases and scattered accident reports: which boats are idle, what each one burns, and how much sharing vessels between operators saves. Several jobs are still done by hand, among them hooking cargo onto cranes, writing the weather limits for each job and checking stability before anchor work. Free ship-tracking data from Norway and Denmark, the EU's new emissions figures for offshore ships, open route solvers, AI models that read documents and small robot arms are enough to start, and none of the jobs below needs a real vessel at sea.
Domains
AchievedWatch forOpen
Domain
Progress
Last achieved
Watch for
Open
Vessels
Vessels covers how supply boats, anchor handlers and wind-farm service ships are designed, built, bought and laid up as offshore work rises and falls.
7 · 1 · 2
Last achievedFewer owners, older boats2023
Watch forUncrewed ship in safety zones
2
openCargo and deck work
Cargo and deck work is loading a supply vessel at its shore base, carrying deck cargo in containers and baskets and liquids and powders in tanks below deck, and passing it all to and from platforms by crane and hose while both are moving in the sea.
5 · 1 · 2
Last achievedWrong weight drops a load2022
Watch forCrane aids for vessel lifts
2
openAnchor handling and towing
Anchor handling is the work of laying, moving and recovering the anchors of floating rigs and towing rigs between sites, done by anchor handlers that pull chain and wire over a roller at the stern.
6 · 1 · 2
Last achievedCalculations before every job2024
Watch forAnchor handling for floating wind
2
openHolding position
Holding position is keeping a supply or service vessel still and under control beside a platform or turbine while cargo or people cross, mostly by dynamic positioning (DP), computer control of the thrusters and propellers that holds a ship on one spot using position sensors.
7 · 1 · 2
Last achievedFive drifts toward structures2025
Watch forHolding position from shore
2
openScheduling
Scheduling is deciding which supply vessels to hire, which platforms each one visits and when, from which shore base, at what speed, and whether operators share them.
6 · 1 · 2
Last achievedPort work eats sleep2021
Watch forVessel sharing in one plan
2
openCrew transfer and safety
Crew transfer and safety covers moving workers between shore, vessels and offshore sites by boat, basket and gangway, and keeping the crews of offshore vessels alive.
6 · 1 · 2
Last achievedCrew boat hits uncrewed boat2025
Watch forElectric foiling crew boat
2
openFuel
Fuel covers what these vessels burn and how much, and the move from marine diesel to gas, batteries, shore power and new fuels such as ammonia and e-methanol.
5 · 2 · 2
Last achievedOffshore ships report emissions2025
Watch forViking Energy to burn ammonia
2
open
Advances to build with
3 research notes

NVIDIA GR00T 2
Five demonstrations per task
By NVIDIA's own test, its robot model GR00T 2 averages 95% success after five demonstrations of a task, on 50 tasks picked from those it learns that way.

Mistral Large 4
A trillion open parameters
Mistral published its Large 4 AI model, a trillion numbers by its count, free to download and sell, though firms that rent out models need a separate license.

Muse Ember
The jobs agents repeat
Meta's Muse Ember matched Claude Haiku 5.5 on an outside firm's tests at a third of the cost per task, though both list the same prices for text in and out.
Open in offshore supply vessels
3 of 14 open deliverables
Open · Vessels
Count laid-up boats openly
A public weekly list of every supply vessel seen in Norwegian and Danish waters, each marked as working, idle in port or laid up, worked out from ship-tracking data, with the rule for each status and the code published.
Built with what exists
AIS (automatic identification system) positions that ships broadcast, free from Norway's Coastal Administration under an open licence and as historical files from the Danish Maritime Authority; Python with DuckDB or GeoPandas; installation positions from Norway's Offshore Directorate (Sodir).
Open · Cargo and deck work
Robot hook-on, tested to scale
A tabletop test of a robot arm that slips a crane hook into the master link, the ring at the top of a container's lifting slings, on a deck that heaves and rolls like a supply vessel's, at about one tenth of full size.
Built with what exists
A low-cost open robot arm such as the SO-101 with Hugging Face's LeRobot software, a camera, NVIDIA's GR00T 2 robot model trained from a few demonstrations (covered in the Notes as "Five demonstrations per task"), and a hobby six-axis motion platform replaying deck motion.
Open · Anchor handling and towing
Open check for anchor stability
Open-source software that takes a vessel's hydrostatic data, its loading and a planned line tension and direction, and checks the result against IMO's 2016 anchor-handling criteria, showing the margin left at each step of a job.
Built with what exists
Python, a hull offset table run through open hydrostatics code, and the load conditions the commission published in chapter 9 of its report.
Where it sits
Broader