Industries / Transport and vehicles / Maritime and shipping / Offshore supply vessels
Crew transfer and safety
Crew transfer and safety covers moving workers between shore, vessels and offshore sites by boat, basket and gangway, and keeping the crews of offshore vessels alive.
6
Milestones achieved, from 2007 to 2025.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
2007
Deaths in a chain locker
On 29 September 2007 three seamen on the Viking Islay, an emergency response and rescue vessel, died after entering the chain locker, the compartment where the anchor chain is stowed, to secure a rattling chain. Rust on the steel structure and the chain had used up the oxygen in the space.
Lessona closed space can become deadly without any gas being added to it.
Credit
UK Marine Accident Investigation Branch (MAIB), report 12/2008
2008
A gangway that cancels motion
In 2002, at an offshore wind conference in Berlin, the idea came up of mounting a gangway on a Stewart platform, the six-legged base of a flight simulator, so that it cancels a ship's motion and workers can walk across to a structure. Ampelmann, the TU Delft spin-off that built it, says the first transfers took place in the North Sea in 2008, and the European Patent Office says its systems have since moved over six million offshore workers.
Credit
Jan van der Tempel; TU Delft; Ampelmann
2021
A liftboat capsizes in storm
A liftboat is a self-propelled vessel that jacks itself up on legs at a work site, and US rules inspect it as an offshore supply vessel. On 13 April 2021 the SEACOR Power capsized about 7 miles off Port Fourchon, Louisiana, in a thunderstorm with winds over 80 knots; of the 19 aboard, 6 were rescued, 6 were found dead and 7 were never found. The NTSB found the winds exceeded the vessel's operating limits and again recommended personal locator beacons for everyone working on such vessels.
Credit
US National Transportation Safety Board, report MIR-22/26
2024
A code for industrial workers
On 10 November 2022 IMO adopted a new chapter XV of the SOLAS safety convention and the International Code of Safety for Ships carrying Industrial Personnel (IP Code), both in force from 1 July 2024. They cover cargo ships and high-speed craft of 500 gross tonnage and up on international voyages carrying more than 12 industrial personnel, special personnel and passengers combined, and require safe ways of moving them across and "means for position keeping" during transfers.
Credit
IMO Maritime Safety Committee, resolutions MSC.521(106) and MSC.527(106)
2025
Gangway jams on a platform
On 30 May and again on 28 October 2025 the 30 m motion-compensated gangway on the 97 m SOV Island Clipper lost hydraulic power while connected to Equinor's unmanned Oseberg H platform. The gangway was the main way off, so 18 people in May and 3 in October were flown off by rescue helicopter, and in May its underside caught on the landing area's railings and took about an hour and a half to free. Norway's regulator found that "the industry standard on which the gangway is based does not specify an interface with the landing area."
Lessona gangway that locks in place when it fails can trap the ship if the landing area was never checked against it.
Credit
Havtil (Norwegian Ocean Industry Authority)
2025
Crew boat hits uncrewed boat
A crew transfer vessel (CTV) is a small fast catamaran that pushes its bow against a turbine so technicians can step across. On 19 September 2025 the 22.4 m CTV Iceni Legend, heading to a turbine to transfer people, collided with the 4.58 m uncrewed survey vessel X18 in the Greater Gabbard wind farm, 25 nautical miles east of Felixstowe. The CTV took water at the bow and returned to port on its own, X18 sank, and nobody was hurt; the MAIB is examining how well the two could see and talk to each other and the rules for uncrewed vessels.
Credit
UK MAIB, interim report of September 2026
Watch for
Electric foiling crew boat
Artemis Technologies says its all-electric EF-12 CTV, which lifts its hull clear of the water on underwater wings called foils, was demonstrated at Vattenfall's 11-turbine Aberdeen Offshore Wind Farm on 9 July 2025, with Tidal Transit, Lloyd's Register and ORE Catapult as partners. Vattenfall says the boat "successfully executed multiple bollard push manoeuvres on the wind turbines," pressing its bow against their landing posts, but no figures or technician transfers were published.
Achieved whena foiling CTV carries technicians under a paid service contract and an outside party publishes transfer or energy figures.
Claimed by
Artemis Technologies and Vattenfall, July 2025
Open
01
One table of transfer accidents
A public table of accidents and near misses while people cross between vessels and offshore structures, by step-over from a CTV, by gangway, by basket or by crane, with the outcome, the weather and a link to each source report.
The briefCredit · unclaimed02
Gangway clearance on landing areas
A geometry check that, given a gangway's dimensions and movement limits and a drawing of a platform's landing area, shows whether the gangway tip can be lifted clear of railings and other structure after its hydraulics lock, for each sea state and tide the job allows.
The briefCredit · unclaimed
Open 01 · the brief
One table of transfer accidents
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public table of accidents and near misses while people cross between vessels and offshore structures, by step-over from a CTV, by gangway, by basket or by crane, with the outcome, the weather and a link to each source report.
Why it is still open
The UK MAIB's public casualty data has vessel types for offshore supply ships but none for crew transfer vessels, so crew boats are mixed in with other craft; a researcher's download of its 3,040 records for 2020 to 2026 showed this. Accounts of transfer incidents sit scattered across MAIB reports, regulators' reports and IMCA safety flashes.
Built with what exists
The MAIB data portal files, IMCA safety flashes, MAIB, Havtil and NTSB reports, and an AI model that reads long reports and pulls out fields, such as Muse Ember (covered in the Notes as "The jobs agents repeat").
First step
Code every IMCA safety flash that mentions a CTV, a gangway or a personnel basket.
Done looks like
At least 200 events, each coded for transfer method and outcome with its source link, and a second person's check of a 10% sample with the agreement rate published.
Open 02 · the brief
Gangway clearance on landing areas
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A geometry check that, given a gangway's dimensions and movement limits and a drawing of a platform's landing area, shows whether the gangway tip can be lifted clear of railings and other structure after its hydraulics lock, for each sea state and tide the job allows.
Why it is still open
Havtil found that the standard the Island Clipper's gangway was built to "does not specify an interface with the landing area," and the gangway snagged on the Oseberg H railings.
Built with what exists
FreeCAD or another open CAD tool, Python, the descriptions and photographs in Havtil's report, and gangway makers' public data sheets.
First step
Draw the Oseberg H landing area and the Island Clipper's gangway from the report.
Done looks like
A published tool that reproduces the Oseberg H snag and checks ten other landing-area layouts, listing the cases where the tip cannot be freed.