Industries / Industrial equipment and services / Industrial services
Painting and abrasive blasting
Painting and abrasive blasting is the work of cleaning steel structures such as bridges, tanks, ships and plant by driving grit, shot or water at them, and then coating them so they do not rust.
1870
Benjamin Chew Tilghman of Philadelphia was granted US patent 108,408 on 18 October 1870 for cutting and grinding hard materials with a stream of sand driven at them, and the patent says that cast or wrought metal can be "cleaned from slag, scale, or other incrustation" this way.
36
Milestones achieved across 6 domains.
7
To watch for: announced, not yet confirmed outside.
12
Open deliverables. Nobody has shipped them.
In one minute
Where it started
Tilghman's patent of 1870 showed that a stream of sand could clean metal of scale, and steel landmarks were painted by brush with red lead: the Eiffel Tower from 1889, and the Golden Gate Bridge in the 1930s, where paint failed early over mill scale that had not been blasted off. From 1950 the Steel Structures Painting Council in the United States, and from 1967 a Swedish standard of photographs, gave owners and painters shared words for how clean steel must be before it is coated.
Where it stands
Steel is blasted to grades such as Sa 2½ and coated with a zinc-rich primer under epoxy and urethane, systems that the US Federal Highway Administration says can last up to 30 years before a major touch-up; its 100-year study found no system that lasts a century. Blasting has harmed the people who do it: silicosis led Brazil to ban sand blasting in 2004, the slag abrasives that replaced sand brought beryllium and arsenic, and lead and, in Japan, PCBs in old paint make removal a hazardous waste job. Robots now blast and wash ship hulls and tanks, but a 2000 survey by NIOSH, the US workplace health institute, found most of them suited to flat steel, and most published robot rates are still the makers' own.
What is open
Much of the work rests on judgments that nobody has measured: how often inspectors agree on a blast grade or a film thickness, how far salt test kits differ on the same steel, and what today's abrasives contain set beside their safety data sheets. Public records could show how fast bridge coatings decay and which bridges are shedding old paint, and OSHA's air samples could show what blasters have breathed since its 2017 beryllium rule. Image models, language models that read reports and low-cost robot arms make each of these a job a small team could start this month.
Domains
AchievedWatch forOpen
Domain
Progress
Last achieved
Watch for
Open
Surface preparation
Surface preparation means getting steel clean, free of salt and rough enough before it is coated, and checking that it is.
6 · 2 · 2
Last achievedHow much salt coatings tolerate2020
Watch forA model checks blasted steel
2
openBlasting
Blasting drives grit, shot or water at steel to strip rust, mill scale and old paint and to roughen the surface so coatings grip. This domain covers the methods, the abrasives and the harm they do to the people who blast.
7 · 1 · 2
Last achievedRats breathe the substitutes2020
Watch forLaser against blasting in shipyards
2
openCoating
Coating is putting a system of paint or sprayed metal on steel, in a shop or on the standing structure, and keeping it in repair for the decades the steel has to last.
6 · 1 · 2
Last achievedNo coating lasts a century2012
Watch forGraphene in a marine epoxy
2
openInspection
Inspection is checking coating work as it is done and afterwards: how thick each coat is, whether pinholes let water through to the steel, how well the coat sticks, and whether the people checking are qualified.
5 · 1 · 2
Last achievedPaint that could block pumps1998
Watch forThickness read without contact
2
openContainment and waste
Containment and waste is the work of keeping blast dust, old paint and spent abrasive out of the air, water and soil around a job, then testing what was collected and disposing of it.
7 · 1 · 2
Last achievedLead paint falls statewide2023
Watch forLaser removal of PCB paint
2
openRobots
These machines blast, wash or paint steel in place of a person holding a nozzle, carried on cranes, cables or magnetic and vacuum crawlers, often with a vacuum shroud that collects the debris at the tool.
5 · 1 · 2
Last achievedHull robot outruns the crewc. 2003
Watch forMagnetic robots blast and coat
2
open
Advances to build with
1 research note
Open in painting and abrasive blasting
3 of 12 open deliverables
Open · Surface preparation
How often inspectors agree
A public set of photos of blast-cleaned steel from working jobs. At least three certified coating inspectors each grade every photo separately on the ISO 8501-1 preparation grades (Sa 1, Sa 2, Sa 2½ and Sa 3). The set reports how often the inspectors agree and includes an image model trained to give the same grades.
Built with what exists
Phone cameras and a printed color reference card; Label Studio, an open-source labeling tool; Python with statsmodels for Fleiss' kappa, a standard measure of agreement among several raters; Meta's open DINOv2 vision model, fine-tuned on one graphics card; the SteelBlastQC code as a starting point.
Open · Blasting
What is in the abrasive
A public table of abrasives on sale today, each product named. For each, an accredited laboratory analyzes its metals (arsenic, beryllium, cadmium, chromium, lead, manganese and nickel) and its crystalline silica, and the results are set beside what its safety data sheet declares.
Built with what exists
Bags of abrasive bought from suppliers in at least three countries; a commercial laboratory accredited to ISO/IEC 17025 for metals by ICP-MS (EPA Method 6020) and crystalline silica by X-ray diffraction (NIOSH Method 7500); a language model such as Claude to read each safety data sheet into a fixed form (the Notes "Seven more flagged" and "A thousand questions, one pass" cover models that review documents and answer many fixed questions); a spreadsheet published on GitHub. Sealed bags are handled with gloves and a dust mask, and nothing is blasted.
Open · Coating
How fast bridge coatings age
A public notebook that reads every yearly file of US bridge element data from 2015 to 2025 and measures how fast the painted area of element 515, steel protective coating, moves from condition state 1 (good) to states 3 and 4 (poor and severe), for each state, for bridges near and far from the sea, and for bridges with and without failing deck joints above the steel.
Built with what exists
FHWA's element XML files and the matching National Bridge Inventory records (location, year built, joint elements); Python with pandas; a public coastline file to compute distance to the sea; a Markov chain model, the usual tool for element deterioration; GitHub for the code.
Where it sits
Broader
