BRENNEN

Industries / Industrial equipment and services / Industrial services / Painting and abrasive blasting

Coating

Coating is putting a system of paint or sprayed metal on steel, in a shop or on the standing structure, and keeping it in repair for the decades the steel has to last.

6

Milestones achieved, from 1889 to 2012.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1889

    A tower painted by brush

    The Eiffel Tower's puddled iron got four coats of red lead paint (minium) in Gustave Eiffel's workshop, and the tower has been repainted about every seven years since, 19 times in 130 years. Each campaign covers about 250,000 m² with some 60 tonnes of paint, put on mainly with brushes by about 50 painters who work hanging from the structure. Eiffel wrote that "the more meticulous the paint job, the longer the Tower shall endure." The 20th campaign, begun in 2019, set out to strip the earlier layers from parts of the tower, and in 2022 the lead released by removing the previous 19 layers interrupted the work; the workers who remove it wear masks and shower at the end of each shift.

    LessonPaint laid over paint for a century leaves a thick, lead-bearing layer that someone must one day take off.

    ipcm.it

    Credit

    Gustave Eiffel; SETE, the company that runs the tower; architect Pierre-Antoine Gatier for the 20th campaign

  2. 1909

    Spraying molten metal

    Max Ulrich Schoop, a Swiss inventor, devised a way to melt metal wire in a flame and spray it onto objects, according to Metallisation, the British firm that took the British rights to his patents in 1922. Metallisation built its own flame-spray pistol for zinc and aluminum coatings in 1938 and metal-sprayed the Forth Road Bridge in Scotland, which opened in 1964. Sprayed zinc is still in use on bridges: the US Federal Highway Administration (FHWA) included a thermally sprayed zinc primer among the systems it tested from 2009.

    metallisation.comfhwa.dot.gov

    Credit

    Max Ulrich Schoop; Metallisation Ltd

  3. 1938

    Mill scale lifts the paint

    The Golden Gate Bridge was painted International Orange over a lead primer as it was built, and its paint was in such poor condition when it opened that the bridge district had to speed up its painting program. The district's 1938–39 annual report blamed most failures on loosening mill scale, the hard oxide skin that steel leaves the rolling mill with, and noted that steel on later structures was sandblasted or flame cleaned before erection. Painting that year cost $112,431.84, the largest item in the maintenance budget, and weather stopped outdoor painting for over 30% of working hours. From 1968 the district removed the original lead paint and replaced it with an inorganic zinc silicate primer and vinyl topcoats, finishing in 1995; the topcoat changed to an acrylic in 1990 to meet limits on volatile organic compounds (VOCs), the solvents that evaporate from paint.

    LessonPaint lasts only as long as the surface under it; the district's report says that skipping the cleaning of the steel before erection "added greatly to the cost of maintenance painting.".

    goldengate.org

    Credit

    Golden Gate Bridge, Highway and Transportation District

  4. 1995

    Zinc primers for bridges

    Zinc-rich primers are paints so full of zinc dust, over 80% by weight in the best inorganic ones, that they conduct electricity and protect any bare steel nearby by corroding in its place. In a technical note of November 1995, FHWA reported that in its test programs three-coat systems of a zinc-rich primer, an epoxy intermediate coat and a urethane topcoat had performed "far superior" to coatings without zinc in harsh marine and salt-rich exposures, when put on blast-cleaned steel. It put their extra paint cost at about 30%, which was under 2% of a repainting job costing $5 to $12 a square foot. In 2012 FHWA wrote that the industry had switched from lead-based to zinc-based three-coat systems in the 1970s and that these can protect steel for up to 30 years before a major touch-up.

    LessonWaterborne inorganic zinc primers, which give off no VOCs, rusted early and shed their topcoats when cured in humid, still air, so FHWA advised using them only where conditions can be controlled, as in fabrication shops.

    fhwa.dot.govfhwa.dot.gov

    Credit

    FHWA Office of Engineering Research and Development

  5. 2011

    One recoat for the Forth

    Painting the Forth Bridge, the railway bridge of 1890 across the Firth of Forth in Scotland, had long been called a task that never ends. On 9 December 2011 Network Rail announced the end of a 10-year, £130 million program that encased the bridge in up to 4,000 tonnes of scaffolding, blasted the old paint off to bare metal, and recoated the whole bridge in one operation for the first time since it was built. The three-coat system came from North Sea offshore platforms: a zinc phosphate primer 25 to 50 micrometers thick (µm, thousandths of a millimeter), a stripe coat brushed by hand onto edges and the 6.5 million rivets, glass-flake epoxy sprayed to at least 400 µm when dry, and a 50 µm acrylic urethane topcoat. The coats went on inside enclosures kept dry with dehumidifiers and heaters so that no condensation formed. The coating was designed to last 25 years, and Network Rail said the bridge would not need a full repaint for at least 20.

    networkrailmediacentre.co.ukingenia.org.uk

    Credit

    Network Rail; Balfour Beatty Regional Civil Engineering, with Pyeroy (blasting and coating) and Harsco Infrastructure (access and enclosures); W. J. Leigh of Bolton (the paint)

  6. 2012

    No coating lasts a century

    FHWA began a 100-Year Coating Study in August 2009 to find coatings that could protect steel bridges for 100 years with virtually no maintenance. It tested eight systems, two proven three-coat systems among them as controls, on flat panels and on panels built with bolts, welds and angles, through 3,600 hours of a cyclic laboratory test and outdoors, including six months at the Golden Gate Bridge. Its 2012 summary found that none of the eight would give 100 maintenance-free years, that the two controls and a one-coat calcium sulfonate alkyd beat every newer system, and that two two-coat systems, one of them on a thermally sprayed zinc primer, failed so early that the study was ended ahead of plan.

    LessonFHWA concluded that the gains lay in applying proven systems correctly, with fewer human errors, and in a simple field test for salt left on blasted steel.

    fhwa.dot.gov

    Credit

    FHWA Coatings and Corrosion Laboratory

Watch for

  1. Graphene in a marine epoxy

    Sparc Technologies, an Australian company, makes ecosparc, a graphene additive for epoxy coatings. It says that in nine rounds of cyclic corrosion tests on more than 4,000 panels the additive cut corrosion creep, the rust that spreads from a scratch, by 26% to 79% across a range of epoxy coatings, that it holds about 24 months of field data, and that AkzoNobel began selling an ecosparc version of its Interzone 954 epoxy in Australia in May 2026. A field trial on the West Beach Bridge in Adelaide and on a jetty, run with South Australia's Department for Infrastructure and Transport and comparing the coating with a control area of a market-leading paint, was announced in March 2024.

    Achieved whenthe department or another outside party publishes measured results from that trial, set against the control area, after several years of exposure.

    clients3.weblink.com.augraphene-info.com

    Claimed by

    Sparc Technologies, investor presentation, June 2026

Open

  1. 01

    How fast bridge coatings age

    A public notebook that reads every yearly file of US bridge element data from 2015 to 2025 and measures how fast the painted area of element 515, steel protective coating, moves from condition state 1 (good) to states 3 and 4 (poor and severe), for each state, for bridges near and far from the sea, and for bridges with and without failing deck joints above the steel.

    The brief
    Credit · unclaimed
  2. 02

    Repaint histories of landmarks

    An open table of documented repaint campaigns for at least 30 large steel or iron structures in at least 10 countries, giving for each campaign the years, the area painted, how the old paint was removed, the coating system and its thicknesses, the cost where published, and the source for each field.

    The brief
    Credit · unclaimed

Open 01 · the brief

How fast bridge coatings age

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public notebook that reads every yearly file of US bridge element data from 2015 to 2025 and measures how fast the painted area of element 515, steel protective coating, moves from condition state 1 (good) to states 3 and 4 (poor and severe), for each state, for bridges near and far from the sea, and for bridges with and without failing deck joints above the steel.

Why it is still open

FHWA publishes the element data each year from 2015, and collection is required for every bridge on the National Highway System, but the coating element is reported as quantities in four condition states with no age for the paint. Earlier work is regional. A 2022 study for 12 Midwest states, none of them on the sea, modeled coating defects from the states' own bridge management data and found that the progression of coating effectiveness "exhibits an inconsistent pattern among states". A 2001 Virginia Tech dissertation estimated girder paint life in Virginia from the letter ratings used before element 515, and a 2022 Purdue study for Indiana found that many states no longer do maintenance painting. A November 2026 search found no national analysis of element 515 by climate.

fhwa.dot.govfhwa.dot.govwisconsindot.govvtechworks.lib.vt.edudoi.org

Built with what exists

FHWA's element XML files and the matching National Bridge Inventory records (location, year built, joint elements); Python with pandas; a public coastline file to compute distance to the sea; a Markov chain model, the usual tool for element deterioration; GitHub for the code.

  1. First step

    Download the 2015 and 2025 files for one coastal state and one inland state and count the bridges that report element 515 in both years.

  2. Done looks like

    For every state that reports element 515 on at least 300 bridges, a published table of yearly transition rates between condition states, with uncertainty, and the median years from mostly good to a quarter poor or worse, rebuilt from FHWA's raw files with one command and checked by a bridge engineer outside the team.

Open 02 · the brief

Repaint histories of landmarks

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An open table of documented repaint campaigns for at least 30 large steel or iron structures in at least 10 countries, giving for each campaign the years, the area painted, how the old paint was removed, the coating system and its thicknesses, the cost where published, and the source for each field.

Why it is still open

Owners publish their histories separately and in different forms, as the Eiffel Tower's 20 campaigns, the Golden Gate Bridge's continuous painting and the Forth Bridge's single 2002–2011 recoat show. A web search and a Crossref search in November 2026 found studies of US state coating records but no compiled history of repaint campaigns on landmark structures.

ipcm.itgoldengate.orgnetworkrailmediacentre.co.uk

Built with what exists

owners' annual reports and archives, digitized newspapers and engineering journals; a language model such as Claude to fill a fixed form from each document (the Notes "Seven more flagged" and "A thousand questions, one pass" cover models reviewing documents and answering many fixed questions); a second person to check each row; a CSV file on GitHub or Zenodo.

  1. First step

    Enter the Eiffel Tower, the Golden Gate Bridge and the Forth Bridge from the sources above, then write to five more owners asking for their repaint records.

  2. Done looks like

    At least 30 structures and 100 campaigns, every field linked to its source, and a second person's check of 20 rows picked at random agreeing on at least 90% of fields.