Industries / Energy, water and waste / Oil and gas extraction
Oilfield services
Oilfield services are the contractors that oil and gas producers hire to drill and steer their wells, measure the rock and fluids inside them, line them with steel pipe and cement, crack the rock open so oil and gas can flow, and later repair, plug and close them.
1919
Erle P. Halliburton started a business selling oil-well cementing, pumping cement around a well's steel pipe to keep water out, to drillers in the North Texas and southern Oklahoma oil booms; it became the Halliburton Oil Well Cementing Company in 1920 and is now Halliburton, a worldwide oilfield services company, according to the Oklahoma Historical Society.
34
Milestones achieved across 6 domains.
11
To watch for: announced, not yet confirmed outside.
12
Open deliverables. Nobody has shipped them.
In one minute
Where it started
Early oil companies drilled with hired crews and did the rest themselves. From 1919 small firms began selling one skill each: Halliburton cemented wells, and from 1927 the Schlumberger brothers measured rock with electrical tools lowered into wells on a cable. Over the next century such firms added steering, perforating, fracturing and repair, and a few grew into worldwide companies that will build a whole well for a producer.
Where it stands
SLB reported $35.7 billion of revenue in 2025, Halliburton $22.2 billion and Baker Hughes's oilfield segment $14.3 billion, according to their annual reports; all three earned less than in 2024, and Baker Hughes put its drop down to fewer rigs at work. Horizontal wells have been most new US wells since late 2014, by the Energy Information Administration's count, and more than half of Permian wells in 2025 were fractured several at a time, by the American Petroleum Institute's. At the other end of a well's life, the US Geological Survey counts 130,121 documented orphan wells still unplugged, and the UK regulator puts the remaining North Sea decommissioning bill at £44 billion, about half of it for plugging wells.
What is open
Much of what service crews have learned sits in regulators' files that no one has turned into data: scanned survey reports, inspectors' notes on casing, well histories that mention lost tools, reports of deaths on service crews since 2019. Models that read documents and cite the sentence behind each answer, and public releases such as FracFocus, Utah FORGE's image logs and BSEE's survey files, now let a small team build those tables. The same data lets outsiders test the companies' newest claims, from wells drilled without a human steering to a proppant made from petroleum coke.
Domains
AchievedWatch forOpen
Domain
Progress
Last achieved
Watch for
Open
Directional drilling
Directional drilling is the work of steering a well along a planned path away from vertical, to reach rock that is not directly below the rig, and of measuring where the hole has actually gone.
5 · 1 · 2
Last achievedSideways becomes the norm2011
Watch forAI steers a Libyan lateral
2
openMeasuring the well
Measuring the well is the work of lowering instruments into a well, or carrying them behind the drill bit, to record the rock's properties against depth so that geologists can tell oil, gas and water apart.
6 · 2 · 2
Last achievedAn open lithology contest2020
Watch forLogging without a cable
2
openCasing and cement
Casing is the steel pipe set inside a drilled hole, and cementing fills the gap between that pipe and the rock so that oil, gas and water stay in their own layers.
4 · 2 · 2
Last achievedLeak tests made public2021
Watch forCements that withstand CO2
2
openHydraulic fracturing
Hydraulic fracturing pumps water, sand and chemicals into a well at high pressure to crack the rock so oil and gas can flow; the contractors who do it also hole the casing, supply the sand and track where the cracks go.
7 · 2 · 2
Last achievedThree wells fractured together2024
Watch forCoke proppant lifts recovery
2
openServicing old wells
Well servicing is the repair and upkeep of wells already drilled: pulling and replacing pumps and tubing, cleaning out sand, recovering tools lost down the hole, and checking that the steel pipe still holds pressure.
5 · 2 · 2
Last achievedShut-in wells brought back2025
Watch forBattery tractor cuts tubing
2
openPlugging and abandoning wells
Plugging and abandoning (P&A) is closing a well for good: setting cement or other plugs inside it so oil, gas and salt water cannot travel up the hole, cutting off the wellhead and restoring the land or seabed.
7 · 2 · 2
Last achievedPlugging costs weighed2026
Watch forVessels to cut wellheads
2
openIn depthWell plugging and abandonment
Other narrower industries
Advances to build with
3 research notes

Mistral Large 4
A trillion open parameters
Mistral published its Large 4 AI model, a trillion numbers by its count, free to download and sell, though firms that rent out models need a separate license.

Muse Ember
The jobs agents repeat
Meta's Muse Ember matched Claude Haiku 5.5 on an outside firm's tests at a third of the cost per task, though both list the same prices for text in and out.

Cursor Agent SDK
Findings that cite notes
Cursor released a kit for building AI agents, and its example, a code reviewer that cites the note behind each finding, is known only from Cursor's account.
Open in oilfield services
3 of 12 open deliverables
Open · Directional drilling
Read old directional surveys
A tool that reads directional survey reports (tables of measured depth, inclination and azimuth, the compass direction of the hole) from scanned or PDF well files, rebuilds the well's path with the standard minimum-curvature method (which joins survey points with smooth arcs), and flags pages where the numbers do not fit together.
Built with what exists
Vision-language models that read scanned tables; open-weight models that can run on your own hardware (see the Note "A trillion open parameters"); welleng, an open-source Python library (Apache 2.0) with minimum-curvature paths and the ISCWSA error model; the US offshore regulator BSEE's data center, which offers both scanned directional survey documents and a digital file of all releasable survey points for wells in US federal waters; Utah FORGE well 16A(78)-32, whose public files include both a survey report PDF and the same survey as a spreadsheet.
Open · Measuring the well
Open test for fracture picks
A public benchmark that scores software for finding fractures in borehole image logs against human picks, built from the image logs and fracture interpretations that the Utah FORGE geothermal project has released.
Built with what exists
Utah FORGE well 16A(78)-32's FMI logs, SLB's original interpretation (as appendix graphics) and a reinterpreted spreadsheet of fracture picks with depth, dip, dip direction and type, released under CC BY 4.0; vision models; open detectors such as Borehole-Fracture-Analysis and DeepLogger as methods to score; a classic curve-fitting baseline; Python.
Open · Casing and cement
An open cement test set
A public table of laboratory results for well cement, drawn from published papers and theses: the recipe (cement class, water ratio, additives), the test temperature and pressure, the thickening time (how long the slurry stays pumpable) and the strength gained over time. Add a baseline model that predicts the results, scored only on papers it was not trained on.
Built with what exists
Vision-language models that read tables and charts in papers, including open-weight models that run on your own computer (see the Note "A trillion open parameters"); the test methods in API Recommended Practice 10B-2 to define each field; Python with scikit-learn or XGBoost for the baseline; two people to check the extracted values.