BRENNEN

Industries / Energy, water and waste / Oil and gas extraction / Oilfield services

Servicing old wells

Well servicing is the repair and upkeep of wells already drilled: pulling and replacing pumps and tubing, cleaning out sand, recovering tools lost down the hole, and checking that the steel pipe still holds pressure.

5

Milestones achieved, from 1859 to 2025.

2

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1859

    The first fishing job

    "Fishing" is the trade of pulling broken or lost equipment out of a well so work can go on. The American Oil & Gas Historical Society (AOGHS) dates its start to 1859, when John Livingston Grandin, drilling America's second oil well near Tidioute, Pennsylvania, days after Edwin Drake's discovery, wedged his iron chisel at 134 feet. His homemade fishing tools failed, he lost the bit as well, and the well was ruined.

    Lessona stuck tool can end a well, so getting it back became a skilled job of its own.

    aoghs.org

    Credit

    John Livingston Grandin

  2. 1962

    Tubing on a reel

    Coiled tubing is one continuous steel tube, thousands of feet long, wound on a reel and pushed into a well through a seal, so crews can pump fluids or run tools while the well stays under pressure and its own pipe stays in place. In 1962 Bowen Tools and the California Oil Company built the first fully working coiled tubing unit, used to wash sand out of wells; the test string was 1⅜-inch pipe butt-welded from 50-foot pieces into 15,000 feet, according to a training article on Drilling Formulas.

    drillingformulas.com

    Credit

    Bowen Tools; California Oil Company

  3. 1974

    Fishing at 30,019 feet

    In March 1974 the drill string of the Bertha Rogers No. 1 in western Oklahoma, then on its way to being the world's deepest well, sheared and left 4,111 feet of pipe and the bit stuck down the hole. Mack Ponder of Wilson Downhole Service Company of Houston recovered the pipe and bit from 30,019 feet, and drilling went on to 31,441 feet, according to AOGHS.

    aoghs.org

    Credit

    Mack Ponder, Wilson Downhole Service Company; operators Lone Star Producing Company and GHK Company

  4. 2023

    Servicing deaths counted

    NIOSH's Fatalities in Oil and Gas Extraction database found 470 worker deaths in the United States from 2014 to 2019. Workers at well servicing companies, the report's category for service contractors other than drillers, made up 60.4% of them, and well servicing, intervention or workover was the third most common phase of work, at 14.3% of deaths. The report says collection stopped in 2019 "because grant funding ended."

    Lessonthe only industry-specific count of these deaths ended with its grant.

    cdc.gov

    Credit

    Kaitlin Wingate and colleagues, NIOSH

  5. 2025

    Shut-in wells brought back

    A shut-in well is closed but not plugged. In 2025 operators in UK waters reinstated 56 shut-in wells and added 16 million barrels of oil equivalent, and the cost of each barrel added through well work fell from £9.60 in 2024 to £7.60, across 398 interventions, according to the UK regulator's 2026 Wells Insights Report. Of 2,298 UK offshore wells, 558 were still shut in.

    nstauthority.co.uk

    Credit

    UK North Sea operators and their service contractors; North Sea Transition Authority (figures)

Watch for

  1. Battery tractor cuts tubing

    In two offshore jobs, a slim battery-powered tractor (a small motorized crawler that pulls tools along a steeply angled well where gravity alone will not carry them) was run on slickline, a thin solid wire for lowering tools, first to log the tubing and then to cut it with an explosive cutter. Deleum and Well Conveyor call it Asia's first slickline-conveyed tubing cut with such a tractor, and the Intervention and Coiled Tubing Association (ICoTA) gave it its 2026 Asia technology award. No figures were published.

    Achieved whenthe operator or a regulator reports results from repeated jobs, or the method enters routine use.

    icota.com

    Claimed by

    Deleum and Well Conveyor, October 2026

  2. Fewer crane lifts offshore

    Wellvene says its InterFrame, a compact self-supporting frame for wireline work (lowering tools into a well on an electric cable), cuts crane lifts and manual handling and keeps people from working under suspended loads. ICoTA's award notice says it was introduced in November 2025 and is "now field-proven offshore." No numbers were given.

    Achieved whenan operator publishes counts of crane lifts and handling tasks avoided across many jobs.

    icota.com

    Claimed by

    Wellvene, November 2026

Open

  1. 01

    Restart the servicing death count

    An open, coded record of US oilfield service-crew deaths from 2020 on, built from OSHA's public accident investigation summaries for the service industry codes (NAICS 213111 and 213112). Each death is coded by phase of work (rigging up, pulling tubing or rods, coiled tubing, wireline, fishing, driving) and by event, in the categories NIOSH used for 2014 to 2019, with the sentence that supports each code.

    The brief
    Credit · unclaimed
  2. 02

    Tally Norway's fishing jobs

    A public table of every fishing job described in the Norwegian Offshore Directorate's wellbore histories: what was lost, at what depth, how long the fishing took where stated, whether the "fish" (the lost item) came out, and whether the hole had to be sidetracked, meaning drilled around the obstruction. Each row quotes the sentence it came from.

    The brief
    Credit · unclaimed

Open 01 · the brief

Restart the servicing death count

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An open, coded record of US oilfield service-crew deaths from 2020 on, built from OSHA's public accident investigation summaries for the service industry codes (NAICS 213111 and 213112). Each death is coded by phase of work (rigging up, pulling tubing or rods, coiled tubing, wireline, fishing, driving) and by event, in the categories NIOSH used for 2014 to 2019, with the sentence that supports each code.

Why it is still open

NIOSH's industry-specific database stopped collecting after 2019 "because grant funding ended," and it had found 44.7% of its cases in OSHA reports, so the public records it relied on still exist but no one codes them. The Bureau of Labor Statistics still counts deaths each year, 65 in 2024 for oil and gas extraction, drilling and support work together, but gives no breakdown by kind of work. Cleaned copies of OSHA's fatality reports on GitHub are not coded by oilfield task.

cdc.govbls.govgithub.com

Built with what exists

OSHA's public accident investigation summaries; a language model that drafts each code and quotes the sentence behind it (see the Note "Findings that cite notes"); open-weight models for local runs (see the Note "A trillion open parameters"); two human coders; Python.

  1. First step

    Pull OSHA's accident summaries for NAICS 213112 for 2020 and code 30 by hand to test the categories.

  2. Done looks like

    Every OSHA-investigated death in the two codes from 2020 through 2025 coded, two coders agreeing on phase of work at a Cohen's kappa of 0.8 or higher on a 100-case sample, and the counts set beside NIOSH's 2014–2019 table, published under an open license.

Open 02 · the brief

Tally Norway's fishing jobs

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public table of every fishing job described in the Norwegian Offshore Directorate's wellbore histories: what was lost, at what depth, how long the fishing took where stated, whether the "fish" (the lost item) came out, and whether the hole had to be sidetracked, meaning drilled around the obstruction. Each row quotes the sentence it came from.

Why it is still open

The main published statistics on fishing success, by Keller, Brinkmann and Taneja in 1984, used Mobil's private records from 1970 to 1981. The directorate's open data service holds 1,979 wellbore histories, and 138 of them mention "fish," by this session's count; the two GitHub projects found that mine these histories count words and pull out pressure sentences, and publish no event table.

osti.govfactmaps.sodir.nogithub.com

Built with what exists

The directorate's FactMaps open data service (table wellbore_history); a language model that extracts each event with its quoted sentence (see the Note "Findings that cite notes"); two human checkers; Python.

  1. First step

    Download the 138 histories that mention "fish" from the public service and code 20 by hand to fix the fields.

  2. Done looks like

    All 1,979 histories processed; on a hand-coded sample of 100 histories the table finds at least 90% of fishing jobs with no more than 5% false entries; recovery and sidetrack rates reported by decade and depth, published with the code.