BRENNEN

Industries / Construction and property / Heavy civil

Marine construction

Marine construction builds the structures that stand at the water's edge or in the sea: piles, docks and piers, seawalls and breakwaters, and the foundations of offshore platforms.

c. 23 BCE

Builders working for King Herod of Judaea began the harbor of Sebastos at Caesarea, on a sandy coast with no natural shelter, and in about ten years made what Robert Hohlfelder and John Peter Oleson of the Roman Maritime Concrete Study call the largest artificial harbor built in the open sea up to that time, from concrete placed under water.

web.uvic.ca

34

Milestones achieved across 6 domains.

7

To watch for: announced, not yet confirmed outside.

12

Open deliverables. Nobody has shipped them.

In one minute

Where it started

Builders have driven timber piles into the seabed and dumped stone into the sea for thousands of years. At Caesarea, Herod's builders poured Roman concrete, lime mixed with volcanic ash that hardens under water, into wooden forms to make breakwaters on an open coast. Floating timber caissons, boxes sunk to the bottom, carried bridge piers from 1739, compressed air kept water out of deep digs from 1841, and reinforced concrete jetties were in use by 1899.

Where it stands

Much of the world's coast is now built on. Rachel Gittman and colleagues counted 22,842 km of armored shoreline in the continental US in 2015, about 14% of it, and Ma Zhijun and colleagues reported in 2014 that seawalls lined about 60% of mainland China's coast, 11,000 km by 2010. Offshore, steel jackets stand in about 400 m of water, and the design rules for platforms, quay walls and breakwaters have been rewritten after hurricanes, earthquakes and a tsunami showed where they fell short.

What is open

The record of how these structures fail and age is scattered: storm losses sit in PDF appendices, earthquake movements of quay walls in separate papers, and the condition of wrapped piles and living shorelines in owners' files. Most open jobs here join that record into public tables or set shared tests, from shipworm forecasts by harbor to blind tests of jacket collapse models. Robots that dig inside caissons or survey piers on their own are in trials, by their makers' and builders' accounts, and shared test data would show how far to trust them.

Domains

AchievedWatch forOpen

Open in marine construction

3 of 12 open deliverables

Open · Piles

Shipworm season by harbor

A monthly map that flags the harbors where the water is warm and salty enough for Teredo navalis to breed and settle on timber piles, checked against dated outbreaks.

Built with what exists

Copernicus Marine Service ocean reanalysis data (sea temperature and salinity, free to download); the breeding and settlement limits published by Appelqvist and colleagues and by Borges and colleagues; Python with xarray; QGIS for the maps.

Credit · unclaimed

Open · Docks and piers

Quay walls moved by earthquakes

An open table of every documented case of a quay wall, sheet-pile wall or pile-supported wharf that moved in an earthquake, with the wall type and height, the soil behind and below it, the measured shaking, and the measured seaward movement, settlement and tilt. Then test a simple rule against it, such as movement as a share of wall height against peak ground acceleration.

Built with what exists

pdftotext and Tesseract OCR for scanned reports; an AI model that reads tables from page images, with every value checked by a person against the page; the open archives of J-STAGE, the NEHRP library and the International Conference on Coastal Engineering; USGS ShakeMap for the shaking at each port; Python and pandas.

Credit · unclaimed

Open · Seawalls and breakwaters

Crest heights for Gulf seawalls

For every seawall, bulkhead and revetment already mapped on the Mississippi coast, the elevation of its top (the crest) every 10 m, taken from public lidar, published as a map layer that hurricane impact models can read.

Built with what exists

NOAA's national shoreline structure lines; lidar point clouds from the USGS 3D Elevation Program and NOAA Digital Coast; PDAL to sample points along each line; QGIS and Python; optionally pyShore, an open deep learning toolkit from William & Mary that found shoreline structures in 60 cm aerial images with 72% overall accuracy, to catch structures the maps miss.

Credit · unclaimed

Where it sits