BRENNEN

Industries / Construction and property / Heavy civil / Marine construction

Seawalls and breakwaters

A seawall is a wall along the shore that stops waves and flooding, and a breakwater stands out in the sea to make calm water behind it, often as a mound of rock faced with heavy stones or concrete blocks called armor.

7

Milestones achieved, from 1904 to 2025.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1904

    Galveston walls off the Gulf

    A hurricane on 8 September 1900 killed at least 6,000 of Galveston Island's 44,000 people. A board of three engineers, Henry Martyn Robert, Alfred Noble and Henry Clay Ripley, proposed a curved concrete seawall rising 17 feet above mean low tide; the first 17,593 feet were built from 1902 to 1904, and from 1903 to 1911 the city raised about 500 blocks behind it, jacking up some 2,000 buildings and pumping in sand. The wall now runs more than 10 miles.

    asce.org

    Credit

    the Robert, Noble and Ripley board; J. M. O'Rourke and Company (builder); Galveston County

  2. 1950

    Four-legged concrete armor

    The Tetrapod is a four-legged concrete block for facing breakwaters and seawalls, which its Grenoble developer says gave much greater stability under wave attack than anything available at the time. Pierre Danel wrote in 1953 that the first structure to use them, the seawater intake of the Roches Noires power station at Casablanca, Morocco, had been built nearly four years earlier. About thirty years later the same lab, by then called Sogreah, brought out the Accropode, a block placed in a single layer instead of two, which its current owner says has been used more than 200 times in 48 countries since 1981.

    doi.orgconcretelayer.comconcretelayer.com

    Credit

    Pierre Danel and Paul Anglès d'Auriac, Laboratoire Dauphinois d'Hydraulique (later Sogreah, now Artelia), Grenoble

  3. 1959

    A formula for armor weight

    Robert Y. Hudson, head of the wave action section at the US Army Engineer Waterways Experiment Station in Vicksburg, Mississippi, published his laboratory study of rubble-mound breakwaters in September 1959. His formula gives the lightest armor stone or block that stays put under a given design wave, using a stability coefficient measured in wave tank tests for each kind of stone or block, and it was for many years the US standard for designing rock structures.

    LessonThe formula holds only for steep storm waves and permeable mounds, and later formulas added the wave period and the permeability of the core.

    api.crossref.orgen.wikipedia.org

    Credit

    Robert Y. Hudson, US Army Corps of Engineers

  4. 1978

    Sines breakwater breaks up

    The main breakwater at Port Sines, Portugal, about 2 km long in water up to 50 m deep, was designed for 11 m waves and armored with 42-tonne Dolos blocks, H-shaped concrete units with no steel inside. On 26 February 1978, in a storm most thought was below the design waves, it lost about two-thirds of its armor, and storms in December 1978 and February 1979 stripped all armor from its seaward 1.5 km. An investigating panel concluded that blocks rocked in place, struck their neighbors hard enough to break, and that the armor then came apart quickly.

    LessonUnreinforced blocks heavy enough to stand still can break once they start to rock, so slender units at deep, exposed sites need their strength checked, not only their weight.

    doi.orgdoi.org

    Credit

    Port Sines Investigating Panel (Baird, Caldwell, Edge, Magoon and others), funded in part by the US National Science Foundation

  5. 2011

    A tsunami overruns Kamaishi

    The tsunami breakwaters across the mouth of Kamaishi Bay, Japan, stood in water up to 63 m deep and were built of caissons weighing up to about 36,000 tons. The tsunami of 11 March 2011 poured over them: on the deep part of the north breakwater 7 of 22 caissons slid and 14 leaned, and model tests at 1/20 scale pointed to the difference in water level across the wall and scour of the rubble mound behind it.

    LessonIn September 2013 Japan revised its port standards to require "tough" breakwaters and seawalls, which resist overturning even when a tsunami larger than the design one deforms them, so that they still delay the water reaching the land behind.

    doi.orgnilim.go.jp

    Credit

    analysis by Arikawa, Sato, Shimosako, Hasegawa and Yeom, Port and Airport Research Institute

  6. 2021

    Guidelines for nature-based defenses

    Natural and nature-based features are marshes, reefs, dunes and similar landforms, built or restored, that reduce waves and flooding alone or alongside walls; a living shoreline uses plants, sand and a little rock in place of a bulkhead. In September 2021 the US Army Corps of Engineers and partners published international guidelines, 20 chapters begun in 2016, on planning, designing, building and maintaining them.

    ewn.erdc.dren.mildoi.org

    Credit

    Todd Bridges and co-authors, US Army Engineer Research and Development Center's Engineering With Nature program, with contributors from Rijkswaterstaat, England's Environment Agency, NOAA, The Nature Conservancy and the World Bank

  7. 2025

    A year of overtopping measured

    Overtopping is water thrown over the top of a seawall by waves. Scientists from the National Oceanography Centre (NOC) and the University of Plymouth kept sensors running on the sea wall at Dawlish, England, for a full year and joined the readings with national wave, tide and wind records; NOC calls the result the first continuous dataset of overtopping events. Their paper, published in December 2025, found that named storms account for less than 2% of the tides with overtopping each year.

    LessonThe conditions that cause the most frequent overtopping differ from those that throw water farthest inland, which complicates warnings.

    noc.ac.uk

    Credit

    Jennifer Brown and colleagues, NOC and University of Plymouth

Watch for

  1. Java's 500 km sea wall

    Indonesia plans a sea wall about 500 km long along the north coast of Java, in 15 segments built in parallel, at a cost of up to US$80 billion over about 20 years, and President Prabowo Subianto set up an authority to run it in August 2025. In May 2026 its head said the project was still in planning, with no launch date, and that planning for the first priority areas in Central Java was nearly 80% done.

    Achieved whena first segment is built and an outside party, such as an auditor or a university survey, reports it finished and in service.

    thestar.com.my

    Claimed by

    Government of Indonesia (authority head Didit Herdiawan Ashaf; Coordinating Minister Agus Harimurti Yudhoyono), May 2026

Open

  1. 01

    Crest heights for Gulf seawalls

    For every seawall, bulkhead and revetment already mapped on the Mississippi coast, the elevation of its top (the crest) every 10 m, taken from public lidar, published as a map layer that hurricane impact models can read.

    The brief
    Credit · unclaimed
  2. 02

    A census of living shorelines

    For one state, a check of every living shoreline permitted over ten years on recent aerial images, each recorded as intact, partly lost, or replaced by a hard wall, with the image calls tested against ground ratings.

    The brief
    Credit · unclaimed

Open 01 · the brief

Crest heights for Gulf seawalls

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

For every seawall, bulkhead and revetment already mapped on the Mississippi coast, the elevation of its top (the crest) every 10 m, taken from public lidar, published as a map layer that hurricane impact models can read.

Why it is still open

The US Geological Survey compiled the data sources on hard shoreline structures for each Atlantic and Gulf state in 2025, to make hurricane impact models more accurate; in its table only New Hampshire's layer has heights and Massachusetts's has some, while Mississippi is covered only by NOAA's national shoreline, which has none. USGS already extracts dune crest heights every 10 m from the same lidar for Alabama and Mississippi beaches, but not for walls.

usgs.govcatalog.data.gov

Built with what exists

NOAA's national shoreline structure lines; lidar point clouds from the USGS 3D Elevation Program and NOAA Digital Coast; PDAL to sample points along each line; QGIS and Python; optionally pyShore, an open deep learning toolkit from William & Mary that found shoreline structures in 60 cm aerial images with 72% overall accuracy, to catch structures the maps miss.

  1. First step

    Download NOAA's structure lines and the newest lidar for one Mississippi county and extract crest heights along its longest seawall.

  2. Done looks like

    A public layer for Mississippi's coast with a crest elevation every 10 m on every mapped structure, its vertical datum stated, and the median error against 30 points surveyed with a GNSS receiver from public land on the landward side.

Open 02 · the brief

A census of living shorelines

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

For one state, a check of every living shoreline permitted over ten years on recent aerial images, each recorded as intact, partly lost, or replaced by a hard wall, with the image calls tested against ground ratings.

Why it is still open

Evidence on how living shorelines hold up comes from samples. In 2021 Maryland's environment department rated 49 of the living shorelines it authorized from 2011 to 2017 on site, found over 80% successful and called for more systematic monitoring, and a 2019 evaluation of 17 Hurricane Sandy projects for the National Fish and Wildlife Foundation called its observations anecdotal and preliminary. No check of every permitted project in a state was found.

mde.maryland.govnfwf.org

Built with what exists

State permit records, by public records request where they are not online; USDA NAIP aerial imagery and Google Earth's historical images; an AI vision model for a first pass, with every call checked by a person; QGIS.

  1. First step

    Ask one state's coastal agency for its list of living shoreline permits issued from 2010 to 2020 and check the first 20 on aerial images.

  2. Done looks like

    At least 200 permitted projects in one state, each with a status and image date, the share still intact by project age and type, and the agreement rate between image calls and on-site ratings for at least 30 projects, published by county without owners' names.