Industries / Construction and property / Heavy civil / Marine construction
Inspection and repair
This work checks the hidden parts of piers, wharves, seawalls and offshore jackets, much of it below water or under a deck, and fixes what has worn before it fails.
6
Milestones achieved, from 1920 to 2022.
2
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1920
Shipworms drop Bay Area wharves
On 2 March 1920 about 1,000 feet (300 m) of a Union Oil Company wharf fell into the Carquinez Strait, northeast of San Francisco Bay, after shipworms ate its piles, and the journal Nature put the bay's damage at $25 million from 1917 to 1921. The San Francisco Bay Marine Piling Committee surveyed about 90% of the area's 250,000 piles, tested some 45 chemical compounds and in 1927 published creosoting and construction guidelines.
LessonA long drought made the bay saltier and let an Atlantic shipworm spread through untreated piles, so a harbor that has been safe for timber can turn hostile within a few years.
Credit
San Francisco Bay Marine Piling Committee
2005
Fast rust at low tide
Accelerated low water corrosion (ALWC) is a fast, local attack on steel piles and sheet-pile walls just above the lowest tide, which can remove 1 mm or more of steel per side per year where ordinary sea corrosion seldom exceeds 0.3 to 0.4 mm. In 2005 CIRIA, the UK construction research body, published guidance on managing it, prepared by Mott MacDonald with partners; it reported serious holing after as little as 20 years on structures meant to last 40 to 120 years, and said the only reliable way to find ALWC was to look and measure the remaining wall thickness.
LessonBuild cathodic protection, a small electric current that stops steel rusting, and coatings into new steel structures, because fitting them later costs 3 to 10 times as much.
maritimejournal.comsoutherncoastalgroup-scopac.org.ukportstrategy.com
Credit
CIRIA; Mott MacDonald
2005
Every platform checked after Rita
Shortly after Hurricane Rita, the US Minerals Management Service (MMS) required above-water and underwater inspections, as defined in API RP 2A, of all platforms east of about the Texas–Louisiana border, about 3,000 of the Gulf's 4,000. The underwater check is mainly a swim-by of the structure by a diver or a remotely operated vehicle (ROV), an underwater robot steered from the surface, and MMS joined the results to platform data it had gathered in 2003 so engineers could see which platforms failed and why.
LessonRecords of a whole fleet, gathered before a storm, let the inspections after it test the design rules.
Credit
Minerals Management Service; Energo Engineering, which analyzed the results
2006
Audits written into law
On 6 February 2006 California's Marine Oil Terminal Engineering and Maintenance Standards (MOTEMS) took effect as part of the state building code, for terminals mostly built before modern earthquake standards. Every marine oil terminal must pass an engineering audit that includes an underwater inspection and earthquake and mooring analyses; after the first audit, underwater audits are repeated every one to six years depending on the results, and above-water audits every three years.
Credit
California State Lands Commission; Han-Padron Associates and Ben C. Gerwick, Inc. (first draft)
2015
One manual for waterfronts
Waterfront structures long lacked the codes that buildings and bridges have, and inspectors relied on experience. In 2015 ASCE published Manual of Practice 130, Waterfront Facilities Inspection and Assessment, which sets out inspection types, damage ratings for each element, overall ratings, service-life estimates and qualifications for inspectors; a second edition in 2025 added risk-based planning, drones and imaging, and a required certificate course for inspectors.
Credit
ASCE Coasts, Oceans, Ports, and Rivers Institute, Waterfront Facility Inspection Committee
2022
Cleaner water brings back borers
New York's rivers were too polluted for marine borers, small animals that tunnel into wood in seawater, when the Brooklyn piers were built in the 1950s and 1960s; as the water got cleaner, borers returned and attacked timber piles around the city. Brooklyn Bridge Park, about a third of which sits on piers held up by about 13,000 timber piles, spent $115 million from 2019 to 2022 encasing about 11,000 sound piles in protective epoxy and structurally repairing 2,000 that were too far gone.
LessonA cleaner harbor can shorten the life of timber built for a dirty one, so protection is cheaper before the damage starts.
Credit
Brooklyn Bridge Park Corporation; Jacobs Engineering Group; Reicon Group and Phoenix Marine
Watch for
Robot surveys a harbor pier
A University of Pisa team reports that an autonomous underwater vehicle (AUV), a robot submarine that runs without a pilot, inspected a harbor pier in a sea trial with no prior map of the structure; using a stereo camera and an acoustic range sensor, it held its distance and speed and produced a 3D reconstruction.
Achieved whena port owner or an outside inspector uses such an AUV for a routine inspection and publishes its findings against a diver or ROV inspection of the same piles.
Claimed by
Simone Tani, Francesco Ruscio, Andrea Caiti and Riccardo Costanzi, Journal of Field Robotics, September 2025
AI flags defects on video
EyeROV, a company in Kochi, India, says its EVAP software analyzes live underwater video from its robots and identifies corrosion, cracks, leaks and structural damage. The account appears on NITI Aayog's Frontier Tech pages, which say they feature submissions "as is" and do not validate them.
Achieved whenan independent test publishes how many known defects the software found, and how many it flagged wrongly, against an engineer's review of the same footage.
Claimed by
EyeROV, July 2026
Open
01
A public register of ALWC
A public map and table of steel waterfront structures with reported accelerated low water corrosion, compiled from published inspection reports, council papers and conference papers: location, year built, steel type, whether cathodic protection was fitted, measured wall loss and years in service. Then test whether simple factors, such as age and protection, predict where it appears.
The briefCredit · unclaimed02
Count how pile wraps age
A tally of piles protected or repaired with jackets (fiberglass shells filled with epoxy or grout, concrete encasements, fabric forms), drawn from owners' inspection reports: when each was installed, in what water, and its condition at each later inspection.
The briefCredit · unclaimed
Open 01 · the brief
A public register of ALWC
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public map and table of steel waterfront structures with reported accelerated low water corrosion, compiled from published inspection reports, council papers and conference papers: location, year built, steel type, whether cathodic protection was fitted, measured wall loss and years in service. Then test whether simple factors, such as age and protection, predict where it appears.
Why it is still open
CIRIA's 2005 study called the extent of ALWC "a source of ongoing debate", rested on 70 returned questionnaires, called for "a comprehensive and widespread survey", and advised assuming it occurs everywhere "in the absence of an accurate predictive model". A 2022 report for two Dorset councils still describes cases one structure at a time, such as Weymouth Harbour.
Built with what exists
Public council, port and conference documents; a vision-language model to pull figures from scanned reports, with each figure checked against its page; QGIS for the map; Python for the analysis.
First step
Extract every structure and loss figure from the 2022 SCOPAC report and the reports it cites into a shared spreadsheet.
Done looks like
At least 50 structures in at least three countries, each linked to its source document, with wall loss in mm per side per year, and a published test of whether age and cathodic protection predict ALWC better than chance.
Open 02 · the brief
Count how pile wraps age
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A tally of piles protected or repaired with jackets (fiberglass shells filled with epoxy or grout, concrete encasements, fabric forms), drawn from owners' inspection reports: when each was installed, in what water, and its condition at each later inspection.
Why it is still open
A 2016 University of Nebraska–Lincoln report for the Nebraska Department of Roads found that "analytical and experimental support for pile retrofits is limited" and that little was known about how well fabric jackets work. Minnesota's 2025 trial of two jacket systems on 14 bridge piles removed some jackets after about a year and expects them to add at least 20 years of life, a forecast rather than a measured record, and Brooklyn Bridge Park's 2022 release reports the work done, not how the jackets have held up since.
dot.nebraska.govmntransportationresearch.orgbrooklynbridgepark.org
Built with what exists
Public records requests; owners' published inspection reports; MOP 130 condition ratings; a spreadsheet or small database; a vision-language model to read scanned reports, checked by hand.
First step
Send public records requests to two owners with large programs, such as a city parks or transport department, for their inspection reports on jacketed piles.
Done looks like
At least 1,000 jacketed piles from at least five owners, each with an install year and at least one later condition rating, and a published share in good condition after 5, 10 and 20 years, by jacket type.