BRENNEN

Industries / Transport and vehicles / Maritime and shipping / Barge and inland waterways

Fleeting services

Fleeting services hold barges at river terminals in moored groups called fleets, and use small harbor towboats to shift each barge between fleets, docks and cleaning or repair stations and to take tows apart and put them back together for the line-haul towboats that carry them between ports.

1845

Captain Daniel Bushnell's small sternwheel boat Walter Forward took three coal flats loaded with 2,000 bushels each from Pittsburgh to Cincinnati, to test whether coal could be moved below Pittsburgh by steam towboat, by his own account in J. Sutton Wall's 1884 report for Pennsylvania's geological survey.

archive.org

37

Milestones achieved across 6 domains.

8

To watch for: announced, not yet confirmed outside.

12

Open deliverables. Nobody has shipped them.

In one minute

Where it started

Steam towboats began taking Pittsburgh coal down the Ohio in 1845, and the coal craft had to be gathered before each trip. By 1884, loaded coal boats and barges were towed down from the Monongahela mines to the Pittsburgh harbor, "where they are tied up and remain until the rivers rise," and there each tow of one towboat and ten to fourteen coal boats was formed, "all securely tied together with rope cables and ratchet chains," by J. Sutton Wall's report for Pennsylvania's geological survey.

Where it stands

The NTSB defines a fleeting area as "a commercial operation where maritime transportation companies stage, make up, break down, or reconfigure barge tows," and the Coast Guard's Pittsburgh unit counted "over 350 known fleeting areas" on its 328 river miles in 2019. Fleets are now large businesses: Hines Furlong Line said in February 2026 that it controls more than 1,000 permitted fleeting spaces, Turn Services completed its purchase of a Lower Mississippi fleet that holds up to 300 barges in September 2026, and Kirby Inland Marine's posted rates for keeping a barge in its fleets ran from US$122 to US$304 a day in November 2026. On the Paraná–Paraguay waterway in South America, where Paraguay alone runs more than 2,500 barges by a July 2026 industry report, convoys are taken apart and rebuilt at anchorages along the route, the same job done on open water.

What is open

Much of fleet work is measured only by the companies that run it or sell to it. No public register counts breakaways across rivers and storms, nobody has published how the current's pull shares out along a tier of moored barges or how close passing tows come to fleets, and the trackers and winches in daily use have no outside tests. Most of these jobs need public accident reports, ship-tracking records, a flume or a workshop bench, and small AI models that read reports and photos, not new boats.

Domains

AchievedWatch forOpen

Advances to build with

2 research notes

Open in fleeting services

3 of 12 open deliverables

Open · Mooring

A register of breakaways

A public table of every reported breakaway of barges from a fleet or terminal on US rivers and Gulf Coast waterways since 2000: date, river mile, the reading and 24-hour rise at the nearest gauge, ice, wind or named storm, number of barges, what held them (cell, deadman, spar barge, piling, wire or synthetic line), what failed first, whether a passing vessel was involved, whether the fleet lay inside a Coast Guard regulated navigation area with mooring rules, what the barges struck, damage, and a link for every value.

Built with what exists

the Coast Guard's CGMIX search of closed investigation reports, which exports to a spreadsheet; NTSB report PDFs; Coast Guard Marine Safety Information Bulletins issued before and after storms; USGS and Corps river gauge records; NOAA storm tracks; the boundaries of 33 CFR 165.803 and 165.838 drawn in QGIS; Waterways Journal and other trade press archives; pdftotext; a low-cost extraction model such as Meta's Muse Ember to fill each field and quote the sentence it came from (see the Note "The jobs agents repeat"); a shared spreadsheet.

Credit · unclaimed

Open · Building and breaking tows

Couple barges from the boat

A scale-model coupling between barges that a harbor-boat operator can make, tension and release without anyone stepping onto the barges: a self-guiding latch at each corner and a motor winch that takes up and holds a measured line tension, tested on model barges in a pool or test tank.

Built with what exists

model barges at about 1:25 scale, of plywood or 3D-printed hulls; funnel-and-ball latches after Mateos's design; stepper-motor winches with load cells read through HX711 boards; a Raspberry Pi; an overhead camera with OpenCV to measure gaps and drift; a pool or university towing tank; ES-TRIN's coupling-force formula, scaled by Froude's rule, under which forces fall with the cube of the scale.

Credit · unclaimed

Open · Tracking barges

Read barge numbers from shore

A public set of photos of river barges taken from banks, bridges and docks, each labeled with the number painted on the barge's side, and a scoreboard showing how often open text-reading models get the whole number right, by distance, angle and light.

Built with what exists

a phone or camera on public riverfronts and bridges; Ultralytics YOLO11 to find the number in the picture; PaddleOCR's PP-OCRv3 and Microsoft's TrOCR to read it; a vision-language model such as Claude Fable 5.2 as a third reader (see the Note "Three working devices"); Label Studio for labeling.

Credit · unclaimed

Where it sits