BRENNEN

Industries / Mining and materials / Steel and metals

Tool and die

Tool and die shops design, build, fit and repair the dies, molds, jigs and fixtures that other factories use to stamp, mold, cast and assemble parts by the thousand or the million.

1826

After a resolution in Congress, a commission examined John H. Hall's rifle works at the Harpers Ferry Armory, where machines with guides and stops, checked with gauges, made the parts. The commission took 100 rifles apart, mixed the parts and put them back together without trouble, and its report said "Arms have never been made so exactly similar to each other by any other process.".

ledger.americanprecision.orgnramuseum.org

30

Milestones achieved across 6 domains.

10

To watch for: announced, not yet confirmed outside.

12

Open deliverables. Nobody has shipped them.

In one minute

Where it started

Tool and die work began with the demand for parts made exactly alike. In 1826 a commission found that John H. Hall's machines, guides and gauges at Harpers Ferry made rifle parts that could be swapped between rifles. Jig borers and copying machines in the 1920s, and later wire EDM, forming simulation and computer-controlled milling of hardened steel, let toolmakers cut dies and molds ever closer to the design before anyone worked them by hand.

Where it stands

Shops now design dies on screen, mill hardened steel directly and rebuild worn tools with lasers, but fitting, tryout and repair still rest on the hands and judgment of experienced toolmakers, and Germany's training for the trade takes 42 months. The Center for Automotive Research estimated in October 2026 that a new car needs more than 2,100 different tools to launch, and reported that China supplied 43.1% of the industrial molds the United States imported in 2025, counted by units.

What is open

Most of the open work is shared data and fair tests, which the trade lacks because each shop keeps its records: strip layouts, generated die surfaces, springback correction, tryout loops, hardening distortion, die faults and worn-die scans. AI models can now draft toolpaths, read furnace charts and index filmed hand work, but no one has published how they compare with experienced toolmakers on real dies and molds.

Domains

AchievedWatch forOpen

Figureheads

1 person

Open in tool and die

3 of 12 open deliverables

Open · Design

A shared strip layout test

A public set of about 30 sheet metal parts, each with a strip layout drawn by an experienced progressive-die designer, plus a scoring script. A progressive die punches and bends a part in a row of stations while a coil strip feeds through it. The strip layout fixes how many stations there are, what each one does, and how much of the strip ends as scrap. The script scores any layout, whether drawn by a person, a rule-based program or an AI model, on station count, material use, balance of forces across the die and a list of shop rules.

Built with what exists

FreeCAD or CadQuery to model the parts; the open progressive-die-designer tool (Python and the OpenCascade geometry kernel) and the 2025 genetic algorithm method as baselines; an AI coding agent to write the scoring script.

Credit · unclaimed

Open · Machining

AI against a mold programmer

A public comparison on ten mold insert test parts, each with a freeform face, deep ribs and small inside corners. Each part is programmed twice, once by an AI CAM tool or AI agent and once by an experienced mold programmer. Both programs are cut on the same machine in machining wax or aluminum, and the parts are scanned and compared.

Built with what exists

CloudNC CAM Assist in Autodesk Fusion, Cimatron's CAM Agent where available, or an AI coding agent writing scripts for FreeCAD's CAM workbench; a small enclosed desktop CNC mill such as a Bantam Tools or Makera Carvera machine; machining wax; a structured-light 3D scanner and a surface roughness tester.

Credit · unclaimed

Open · Fitting and tryout

Open springback correction loop

Free, open programs that take a 3D scan of a stamped part, compare it with the CAD model, and move the die surface the opposite way to cancel springback. Then a real check: dies for one simple part, such as an aluminum hat-shaped channel, are cut, corrected and run at a partner press shop or university lab.

Built with what exists

CalculiX or code_aster, free finite element programs that model contact and permanent bending, for the forming and springback steps; Python with Open3D to line up scans with the CAD model; FreeCAD to edit die surfaces; a handheld structured-light 3D scanner or a scanning service; a machine shop to cut the corrected die inserts.

Credit · unclaimed

Where it sits