BRENNEN

Industries / Mining and materials / Steel and metals / Tool and die

Design

Design decides the shape of a die, mold or fixture before any steel is cut: its working surfaces, the order of its forming steps, and how it holds and locates the part.

4

Milestones achieved, from 1971 to 2017.

2

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1971

    Car surfaces become numbers

    Renault's car bodies began as full-size clay models built by hand, and the drawings, master model and stamping dies all had to match that model, a process Pierre Bézier called "costly and time-consuming". In his paper on Renault's Unisurf system he described numerical control recording points from models, fairing curves, and defining and milling surfaces, and said Renault was starting to let stylists define shapes "through figures".

    doi.org

    Credit

    Pierre Bézier, Régie Nationale des Usines Renault

  2. 1987

    Die design starts earlier

    A study of car development projects found that Japanese makers began designing body dies before the first prototype car was finished, and began cutting them before the last prototype was finished. US makers waited for each stage to finish. Japanese teams usually sent die engineers three releases of drawings, US teams two. By the authors' figures, engineering changes made up 10 to 20% of body die costs in Japanese projects, 30 to 50% in US ones and 10 to 30% in European ones.

    LessonStarting dies early pays only when designers and die engineers talk often; Clark noted that US and European firms used some of the same die suppliers as the Japanese and still did not get the same result.

    brookings.edu

    Credit

    Kim B. Clark, W. Bruce Chew and Takahiro Fujimoto, in Brookings Papers on Economic Activity

  3. 1991

    Simulations face a shared test

    Forming simulation lets a die designer see splits, wrinkles and springback on a computer before a die is built. Springback is the way a pressed part partly bounces back toward its flat shape when the die opens. Since the first NUMISHEET conference in Zurich in 1991, held again every two to three years, software makers and labs have simulated the same benchmark parts and compared their results with measured parts from the benchmark committee.

    LessonIn the 2016 springback benchmark, an aluminum panel, two codes run at the University of Coimbra agreed with each other better than with the measured part; the authors traced the gaps to boundary conditions the benchmark left ambiguous and to how the part was held for measuring.

    estudogeral.uc.pt

    Credit

    the NUMISHEET conference series

  4. 2017

    Fixtures printed overnight

    Volkswagen's Autoeuropa car plant had bought its assembly jigs and fixtures from outside suppliers, who often took several weeks. After a trial in 2014 it began designing them itself and printing them in plastic on desktop 3D printers. By 2017 it ran seven printers and made 93% of those tools in-house; tools were printed overnight and tried on the line by operators the next morning, and development time fell from 56 to 10 days, by the plant's figures as reported by Develop3D.

    develop3d.com

    Credit

    Volkswagen Autoeuropa, with the printer maker Ultimaker

Watch for

  1. Die surfaces from the part

    Researchers trained a generative neural network that proposes the punch and die surfaces of a deep-drawing tool from the shape of the part wanted. Deep drawing presses a flat blank into a cup or box. They tested it only on parts simulated in the LS-DYNA program, and published the code and the dataset.

    Achieved whentools designed this way are built and tried out, and the pressed parts are measured against the target by someone other than the authors.

    github.comdoi.org

    Claimed by

    Michael Hohmann (Helmut Schmidt University, Hamburg), Adili Yiming (TU Dresden) and colleagues, NUMISHEET 2025 proceedings, September 2025

  2. Compensated dies win a benchmark

    AutoForm says its process design won the industrial benchmark at NUMISHEET 2025: a Mercedes-Benz T-node, a joint at the foot of a car's B-pillar, in 1.5 mm stainless steel 1.4301. Teams had to design forming and trimming steps whose part matched a target shape after springback, which means reshaping the die surfaces so the part springs back into the right shape. AutoForm says 10 teams from five countries took part; its account gives no measured deviation and does not show the committee's scoring.

    Achieved whenthe benchmark committee publishes its scores, or a die cut to the compensated surfaces makes parts within the target tolerance as measured by an outside party.

    formingworld.com

    Claimed by

    Martin Milch of AutoForm, on AutoForm's FormingWorld site, June 2026

Open

  1. 01

    A shared strip layout test

    A public set of about 30 sheet metal parts, each with a strip layout drawn by an experienced progressive-die designer, plus a scoring script. A progressive die punches and bends a part in a row of stations while a coil strip feeds through it. The strip layout fixes how many stations there are, what each one does, and how much of the strip ends as scrap. The script scores any layout, whether drawn by a person, a rule-based program or an AI model, on station count, material use, balance of forces across the die and a list of shop rules.

    The brief
    Credit · unclaimed
  2. 02

    Test generated die surfaces

    An outside test of the Hamburg and Dresden model. Generate punch and die surfaces for 20 cup and box parts that were not in its training data, simulate each draw in a second forming program, and measure how far each simulated part lands from its target. Do the same with surfaces drawn by a die designer for comparison.

    The brief
    Credit · unclaimed

Open 01 · the brief

A shared strip layout test

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public set of about 30 sheet metal parts, each with a strip layout drawn by an experienced progressive-die designer, plus a scoring script. A progressive die punches and bends a part in a row of stations while a coil strip feeds through it. The strip layout fixes how many stations there are, what each one does, and how much of the strip ends as scrap. The script scores any layout, whether drawn by a person, a rule-based program or an AI model, on station count, material use, balance of forces across the die and a list of shop rules.

Why it is still open

New methods are tested on their own examples. A 2025 study in Scientific Reports compared its genetic algorithm with earlier methods on "several examples". An open-source tool released in August 2026 lays out strips from STEP files but demonstrates three synthetic parts. Public sheet metal datasets such as BenDFM (March 2026) cover bending, not strip layouts.

doi.orggithub.comarxiv.org

Built with what exists

FreeCAD or CadQuery to model the parts; the open progressive-die-designer tool (Python and the OpenCascade geometry kernel) and the 2025 genetic algorithm method as baselines; an AI coding agent to write the scoring script.

  1. First step

    Model five simple brackets, ask two die designers for strip layouts of each, and run the open tool on the same five.

  2. Done looks like

    30 parts with expert layouts and the scoring script under an open license; at least three methods scored; a second designer's layouts for 10 of the parts, to show how much experts differ from each other.

Open 02 · the brief

Test generated die surfaces

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An outside test of the Hamburg and Dresden model. Generate punch and die surfaces for 20 cup and box parts that were not in its training data, simulate each draw in a second forming program, and measure how far each simulated part lands from its target. Do the same with surfaces drawn by a die designer for comparison.

Why it is still open

The authors evaluated the model only on simulated data from one program, LS-DYNA, over a family of shapes set by a few parameters such as radii and height. No outside check was found.

github.comdoi.org

Built with what exists

The authors' MIT-licensed code and their SyDDD dataset; a forming simulation program other than LS-DYNA, such as AutoForm, PAM-STAMP or Simufact, under an academic license; Python with trimesh to measure distances between shapes.

  1. First step

    Install the code, download SyDDD, and reproduce one result from the paper.

  2. Done looks like

    A published table for 20 unseen parts giving the mean and largest distance, in mm, between each simulated part and its target, for the model's tools and the designer's tools, with all files public.