Industries / Food, farming and forestry / Forestry and logging
Timber and sawmills
Timber and sawmills turns logs into lumber, panels and engineered wood such as plywood, glulam and cross-laminated timber.
1590s
Cornelis Corneliszoon of Uitgeest, in Holland, used a crankshaft to drive a frame of saws from a windmill, and the Zaan district near Amsterdam later held more than 200 wind sawmills.
36
Milestones achieved across 6 domains.
10
To watch for: announced, not yet confirmed outside.
12
Open deliverables. Nobody has shipped them.
In one minute
Where it started
In the 1590s Cornelis Corneliszoon of Uitgeest drove a frame of saws from a windmill through a crankshaft, and wind sawmills spread across the Zaan district near Amsterdam. Steam engines let American mills stand away from rivers from about 1810, and band saws, which waste less wood in sawdust, spread once makers got them to cut straight in the 1880s. Kiln drying, national grading rules and glued panels such as plywood and glulam followed in the decades around 1900.
Where it stands
The world sawed 445 million m³ of lumber in 2024 and made 393 million m³ of wood-based panels such as plywood and particleboard, by the count of the UN Food and Agriculture Organization (FAO). Canada, China, India, Russia and the United States sawed 52% of that lumber, and the Asia-Pacific region made 61% of the panels. Large mills scan logs with lasers, X-ray or CT, let computers choose the cuts and grade boards with cameras. With such tools, mills in Idaho, Washington and Oregon got 17% to 23% more lumber from each cubic foot of log between the 1970s and 2006, by one study's count.
What is open
The scanners and grading systems that large mills use are closed, cost more than a small mill can pay, and learn from private data. Glue bonds in cross-laminated timber are still checked by cutting samples out, learning kiln controllers have been tested only in a laboratory chamber, and the last published study of US wood dust measurements stops in 1997. Phone cameras, small open image models, cheap sensors and public records make each of these jobs possible to attempt now.
Domains
AchievedWatch forOpen
Domain
Progress
Last achieved
Watch for
Open
Log sorting and scanning
Measuring each log as it reaches the mill, judging its volume and quality, and sorting it into piles for the saws.
4 · 2 · 2
Last achievedLasers outmeasure the rules2017
Watch forScanners taught by CT
2
openSawing
Cutting each log into boards and timbers, with the least wood lost to sawdust and offcuts and the most value in what is left.
6 · 2 · 2
Last achievedMore lumber from smaller logs2010
Watch forCT picks the sawing pattern
2
openDrying
Taking water out of green lumber, in the open air or in a heated chamber called a kiln, so that it stops shrinking, resists decay and weighs less to ship.
5 · 1 · 2
Last achievedLumber that moves through2006
Watch forLab-tested AI kiln control
2
openGrading
Sorting each piece of lumber into a grade that tells a buyer what it can be used for, judged by its appearance, its strength or both.
7 · 2 · 2
Last achievedHardwood graded by machine2018
Watch forAI strength grading at Värö
2
openPanels and engineered wood
Gluing wood veneers, strands, chips or whole boards into sheets and beams that are larger, straighter or steadier than a sawn board.
7 · 2 · 2
Last achievedA CLT floor panel falls2018
Watch forDensified wood at scale
2
openMill safety
Keeping people safe around saws, conveyors, heavy logs and the fine wood dust a mill makes, which can burn, explode and cause cancer.
7 · 1 · 2
Last achievedDust checks at 97% compliance2017
Watch forBritish Columbia's new dust rules
2
open
Narrower industries
Open in timber and sawmills
3 of 12 open deliverables
Open · Log sorting and scanning
Hardwood log grades from photos
A phone app that photographs a hardwood log from four sides, finds the surface defects that lower its grade, such as knots, bumps, holes and seams, and assigns a US Forest Service factory log grade (Factory 1, 2 or 3).
Built with what exists
A recent phone camera, the WoodKnots-600 photo set on Zenodo, an image model such as YOLO or Segment Anything, or a small open vision model such as Liquid AI's LFM3, which its maker says can be fine-tuned on one graphics card (see the Note "One GPU to fine-tune"), and the Forest Service's published hardwood log grade rules.
Open · Sawing
Phone cut plans, tested
A fair field test of the phone apps that now plan cuts for small sawmills. Half of a batch of logs is sawn to the app's plan and half to the sawyer's own judgment, and every board is tallied and graded.
Built with what exists
LogPlan, or LogScanner with its companion optimizer Log Master, on a lidar-equipped iPhone; a portable band sawmill; a certified National Hardwood Lumber Association inspector for board grades; and the Forest Service's free LORCAT spreadsheet to check each plan.
Open · Drying
A learning kiln controller, measured
A controller for a small kiln that sets heat, venting and humidity from sensors inside the load, run side by side with the kiln's usual fixed schedule on matched loads of the same species and thickness.
Built with what exists
Halko, an open-source system for controlling and monitoring wood-drying kilns on Raspberry Pi and ESP32 boards, which switches power through Shelly relays; temperature, humidity and pin-type wood moisture sensors; a small dehumidification or solar kiln of the kind woodworkers buy, with its own over-temperature cut-out left in place; Python for the model.
Where it sits
Broader