BRENNEN

Industries / Food, farming and forestry / Forestry and logging / Timber and sawmills

Sawing

Cutting each log into boards and timbers, with the least wood lost to sawdust and offcuts and the most value in what is left.

6

Milestones achieved, from 1590s to 2010.

2

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1590s

    Wind drives the saw

    Cornelis Corneliszoon of Uitgeest, in Holland, fitted a windmill with a crankshaft, a bent shaft that turned the sails' rotation into the up-and-down stroke of a frame of saws. The windmill society De Zaansche Molen says he was the first to drive frame saws with a crankshaft, and the Zaan district outside Amsterdam later had more than 200 wind sawmills. A Dutch regional heritage site says Amsterdam's guild of sawyers had such mills banned in the city until 1630.

    LessonBanning a labor-saving machine in one city moved the new industry to the next district rather than stopping it.

    zaanschemolen.nlhollandroute.nl

    Credit

    Cornelis Corneliszoon van Uitgeest

  2. 1810s

    Steam and the circular saw

    Shortly before 1810, Oliver Evans's wood-burning, high-pressure steam engines began to drive American sawmills, so a mill no longer had to stand on a river. Circular saws, adopted around the middle of the 1800s, cut faster, but their wide kerf, the slot of wood a blade turns into sawdust, wasted much of each log, according to the Dictionary of American History.

    LessonSpeed bought with a thick blade is paid for in sawdust.

    encyclopedia.com

    Credit

    Oliver Evans for the steam engine; the circular saw has no single agreed inventor

  3. 1887

    Band saws that cut straight

    A band saw is a thin steel loop running over two wheels, and it cuts a narrower kerf than a circular saw. Band mills for logs were on sale by the early 1880s, but by D. Clint Prescott's own 1910 account they cut "snakey or crooked lumber" when pushed. His patents of 1887 kept the blade under steady strain with light, nearly frictionless levers, and he wrote that more than 150 of his mills had been built by 1910. The Dictionary of American History says band saws are now popular because their narrower kerf leaves more usable wood.

    LessonA thin blade saves wood only if it also cuts straight at full speed.

    gutenberg.pglaf.orgencyclopedia.com

    Credit

    D. Clint Prescott, by his own account, after earlier builders such as J. R. Hoffman & Co. of Fort Wayne, Indiana

  4. 1971

    Computer picks the first cut

    Hiram Hallock and David W. Lewis at the US Forest Products Laboratory wrote Best Opening Face (BOF), a program that simulates sawing a scanned log every possible way and picks the position of the first cut, the opening face, that gives the most lumber. The lab found that the best and worst opening faces differed by about 20% in lumber yield when every cut is parallel, and estimated that BOF sawing could add 10% or more lumber from logs 5 to 16 inches across. Using it needed a log scanner, a small computer and a carriage that held the log in a known position.

    govinfo.gov

    Credit

    Hiram Hallock and David W. Lewis, US Forest Products Laboratory

  5. 1979

    Accuracy pays

    Using the BOF program, the Forest Products Laboratory tested how sawing accuracy affects lumber yield across 16 combinations of saw kerf from 0.125 to 0.375 inch. Sawing accuracy here means how much board thickness varies from the saw (sawing variation) plus how much extra wood a mill leaves on to cover it (oversizing). Yield rose "exponentially" as accuracy improved, with no extra logs used.

    LessonA saw that cuts to a steadier size lets the mill aim closer to the final size, and the wood saved becomes more boards.

    govinfo.gov

    Credit

    Abigail R. Stern, Hiram Hallock and David W. Lewis, US Forest Products Laboratory

  6. 2010

    More lumber from smaller logs

    A study of western US sawmills found that lumber recovery factor, the board feet of lumber sawn from each cubic foot of log, rose from the 1970s to 2006 by 23% in Oregon, 18% in Washington and 17% in Idaho, even as logs got smaller. The authors credit log scanners linked to computers that choose the sawing pattern, curve sawing (cutting along a log's bend), more accurate and thinner saws, and optimized edging and trimming.

    LessonYield measured against an old log rule misleads, because the rule underestimates small logs; the authors call it "an imprecise measure" of efficiency and measured logs in cubic feet instead.

    research.fs.usda.gov

    Credit

    Charles E. Keegan III, Todd A. Morgan, Keith A. Blatner and Jean M. Daniels

Watch for

  1. CT picks the sawing pattern

    Norra Timber, which runs three sawmills in northern Sweden and saws close to 800,000 cubic meters of timber a year, says CT scans at log sorting let it test up to 35 sawing patterns for each log before choosing one, and that it can now cut a slightly better product from a smaller log. Neither Norra Timber nor Microtec, which supplies the scanners, gives yield or value figures.

    Achieved whena mill or researcher outside Microtec publishes before-and-after volume or value yields for logs sawn to CT-chosen patterns.

    stories.microtec.eu

    Claimed by

    Norra Timber and Microtec, April 2026

  2. Sawing without a sawyer

    Wood & Panel reported in January 2026 that SMARTI, part of TAB Systems, had installed an iLog X-ray scanner in a log sorting line, with SMARTI's own AI finding defects inside logs. SMARTI says its cutting optimization "allows for completely autonomous sawmill operations", but names no mill that runs this way.

    Achieved whena named mill runs full shifts with no person choosing cuts and publishes its recovery and downtime against shifts run by sawyers.

    woodandpanel.com

    Claimed by

    SMARTI, January 2026

Open

  1. 01

    Phone cut plans, tested

    A fair field test of the phone apps that now plan cuts for small sawmills. Half of a batch of logs is sawn to the app's plan and half to the sawyer's own judgment, and every board is tallied and graded.

    The brief
    Credit · unclaimed
  2. 02

    Knot-aware turning for small mills

    A phone tool that photographs a log from four sides, finds the knots on its surface, and tells the sawyer which face to put up on the mill so that knots fall into as few boards as possible.

    The brief
    Credit · unclaimed

Open 01 · the brief

Phone cut plans, tested

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A fair field test of the phone apps that now plan cuts for small sawmills. Half of a batch of logs is sawn to the app's plan and half to the sawyer's own judgment, and every board is tallied and graded.

Why it is still open

The LogPlan app from Millingly says that scanning a log's ends with a phone "lays out every cut, every rotation, every board", and the LogScanner app measures logs with an iPhone's lidar sensor, but neither listing reports a yield test. A 2011 study for small hardwood mills in central Appalachia estimated 10% to 14% more lumber value from sawing optimization by simulating it on logs measured at five mills, not by sawing logs to the optimized plans, and said small mills are "less able to implement advanced technologies" because of their cost.

apps.apple.comfs.usda.gov

Built with what exists

LogPlan, or LogScanner with its companion optimizer Log Master, on a lidar-equipped iPhone; a portable band sawmill; a certified National Hardwood Lumber Association inspector for board grades; and the Forest Service's free LORCAT spreadsheet to check each plan.

  1. First step

    Find a portable-mill owner willing to take part, and saw a pilot of five logs each way with every board marked with its log number.

  2. Done looks like

    At least 30 logs sawn each way, paired by species and diameter, with lumber recovery factor and lumber value per log published for both groups and the difference stated with its uncertainty.

Open 02 · the brief

Knot-aware turning for small mills

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A phone tool that photographs a log from four sides, finds the knots on its surface, and tells the sawyer which face to put up on the mill so that knots fall into as few boards as possible.

Why it is still open

Large mills choose each log's rotation from X-ray or CT scans, which cost too much for a small mill. A 2026 paper by Bořek Reich and co-authors found surface knots from camera images and laser scans and chose sawing angles from them, but its abstract compares those angles only with random ones, and a search found no such tool for a portable mill.

doi.organnforsci.biomedcentral.com

Built with what exists

A phone camera, the WoodKnots-600 photo set for training a knot detector such as YOLO, the Forest Service's LORCAT spreadsheet for checking cut patterns, and a portable band sawmill.

  1. First step

    Photograph 10 logs from four sides before sawing, saw them as usual, and record which surface knots ended up in which boards.

  2. Done looks like

    40 logs, half turned as the tool says and half as the sawyer chooses, with every board graded by a certified inspector and the share of boards in the top grades published for each half.