Industries / Food, farming and forestry / Forestry and logging / Timber and sawmills
Mill safety
Keeping people safe around saws, conveyors, heavy logs and the fine wood dust a mill makes, which can burn, explode and cause cancer.
7
Milestones achieved, from 1971 to 2017.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1971
A US rulebook for sawmills
On 29 May 1971 the new Occupational Safety and Health Administration (OSHA) adopted existing national consensus standards as federal rules, among them § 1910.265, Sawmills, drawn from the American National Standards Institute's ANSI O2.1-1969. The rule covers log and lumber handling, sawing, dry kilns, yard vehicles and dust. It requires a dust collecting system in any mill whose machines make dust, shavings or chips for a quarter of the working day or more.
Credit
OSHA, US Department of Labor
1995
Wood dust causes cancer
The International Agency for Research on Cancer (IARC), part of the World Health Organization, classed wood dust as carcinogenic to humans. Its review of case-control studies found that breathing wood dust at work causes adenocarcinoma, a cancer of the nasal cavities and sinuses. It named sawmills and planer mills, near chippers, saws and planers, among the places with the highest exposure.
Credit
IARC
2012
Explosion at Burns Lake
In January 2012 a dust explosion and fire at Babine Forest Products in Burns Lake, British Columbia, killed two workers and injured 20. WorkSafeBC, the province's workplace safety regulator, found that wood dust in the air was the fuel and that friction inside a guard over a motor's V-belts lit it. Dust collection did not reach all the dusty areas, waste was not removed during shifts, and cold, dry weather and very dry wood from trees killed by the mountain pine beetle made the dust finer and drier.
LessonDry wood makes finer dust, so a mill's clean-up has to change when its logs do.
Credit
WorkSafeBC investigation
2012
Same fuel in Prince George
In April 2012 an explosion at Lakeland Mills in Prince George, British Columbia, killed two workers and injured 22. A failed part let a cooling fan slide along a gear-reducer shaft and grind into a screen, heating the shaft to about 577°C and lighting wood dust in the air. The mill had no dust collection in its dustiest areas, its water misting was not working or ineffective, and no one regularly inspected the cooling fans.
LessonBoth blasts were lit by friction in neglected drive parts, so inspecting machinery is part of dust control.
Credit
WorkSafeBC investigation
2012
Every BC sawmill inspected
After the explosions WorkSafeBC inspected sawmills and other wood processing sites for combustible dust. By March 2013 it had written 304 inspection reports at 171 sawmill locations, and in a second phase covering other wood processors it had issued 746 orders at 224 locations.
Credit
WorkSafeBC
2017
Europe lowers the dust limit
Directive (EU) 2017/2398 cut the binding limit for hardwood dust in workplace air from 3 mg/m³ to 2 mg/m³, effective 17 January 2023. It also applies that limit to all the wood dust present when hardwood dust is mixed with other wood dust, which the directive says is very common.
Credit
the European Parliament and the Council of the EU
2017
Dust checks at 97% compliance
WorkSafeBC made 156 combustible dust inspections at 115 sawmill locations in 2017 to confirm every operating mill in the province had a working dust management program. It issued six orders at four locations and reported a compliance rate of 97%.
Credit
WorkSafeBC, reported by Canadian Forest Industries
Watch for
British Columbia's new dust rules
WorkSafeBC's board of directors approved amendments to the combustible dust rules in Part 6 of British Columbia's Occupational Health and Safety Regulation at its meeting of 14 November 2025. They take effect on 4 January 2027.
Achieved whenthe rules are in force and WorkSafeBC publishes inspection results under them.
Claimed by
WorkSafeBC, November 2025
Open
01
Wood dust exposure since 1998
A public analysis of the wood dust samples OSHA inspectors took in US sawmills and other wood products plants from 1998 on, by year, job and plant type, with the cleaned table and the code published so anyone can rerun it.
The briefCredit · unclaimed02
Every sawmill death, coded
A public table of every OSHA-investigated death and serious injury in US sawmills since 2000, each case coded by machine, task, energy source and the control that failed, such as guarding, lockout or dust removal, with the code book published.
The briefCredit · unclaimed
Open 01 · the brief
Wood dust exposure since 1998
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public analysis of the wood dust samples OSHA inspectors took in US sawmills and other wood products plants from 1998 on, by year, job and plant type, with the cleaned table and the code published so anyone can rerun it.
Why it is still open
The last published analysis of OSHA's wood dust measurements, by Kay Teschke and co-authors in 1999, covered 1,632 samples from 1979 to 1997 and found that reported levels fell sharply over that time. OSHA released the results from its own laboratory, the Chemical Exposure Health Data, in 2010 and now offers them for download by year from 1984 on. A 2013 review found no study that had used them, and a Europe PMC search in November 2026 found no later analysis of wood dust in them.
Built with what exists
OSHA's Chemical Exposure Health Data downloads, the industry codes for wood products (NAICS 321) and sawmills (NAICS 321113), and Python with pandas.
First step
Download one year of the data, find the substance code OSHA uses for wood dust, and count the samples from sawmills.
Done looks like
Every wood dust result from 1998 to 2025 in those industries, summarized by year and job with the geometric mean and the share of samples above the EU limit of 2 mg/m³, with OSHA's own caution about comparing these samples to exposure limits stated beside the results.
Open 02 · the brief
Every sawmill death, coded
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public table of every OSHA-investigated death and serious injury in US sawmills since 2000, each case coded by machine, task, energy source and the control that failed, such as guarding, lockout or dust removal, with the code book published.
Why it is still open
OSHA publishes investigation summaries that can be searched by industry code, and sawmills are NAICS 321113. Coded studies of these summaries exist for construction, such as a 2014 Safety Science study of deaths involving roof trusses, but searches of Crossref and GitHub in November 2026 found none for sawmills.
Built with what exists
OSHA's accident search, Python, and a general AI model to draft a code for each summary, such as Claude, or Gemini Decision 1, which returns probabilities for fixed-answer questions (see the Note "A thousand questions, one pass").
First step
Download the summaries for NAICS 321113 and write a one-page code book with 20 cases coded by hand.
Done looks like
All sawmill summaries from 2000 to 2025 coded, two people independently coding a random 200 of them, and the agreement between the AI and the people published as Cohen's kappa, a standard score for agreement between coders.