BRENNEN

Industries / Mining and materials / Chemicals and petrochemicals / Specialty chemicals

Paint and coatings

The paint and coatings industry makes the liquid and powder films that color and protect buildings, vehicles, machines and steel structures, by grinding pigments into resins, mixing and tinting the result, and testing how long it lasts.

1867

D. R. Averill of Newburg, Ohio, patented a paint on 16 July 1867, and his 1869 reissue describes it as a liquid paint "ready mixed and fully prepared" at the factory, so that "when the packages are opened it will be ready for immediate use". The American Coatings Association, the US industry group, says Averill patented the first prepared or "ready mixed" paints in the United States.

patents.google.compaint.org

34

Milestones achieved across 6 domains.

9

To watch for: announced, not yet confirmed outside.

12

Open deliverables. Nobody has shipped them.

In one minute

Where it started

Paint was long ground and mixed from pigment and oil by the people who used it or by small mills nearby. In 1867 D. R. Averill patented a paint sold ready to use, and by the mid-1880s, the American Coatings Association says, paint factories were springing up across the United States. Over the next century titanium dioxide replaced poisonous lead white, synthetic resins such as alkyds and acrylics replaced drying oils, and water replaced much of the solvent.

Where it stands

Sherwin-Williams, PPG and AkzoNobel lead the trade magazine PCI's 2026 ranking, with 2025 coatings sales of about $19.8 billion, $15.9 billion and $11.5 billion. The shareholders of AkzoNobel and Axalta, sixth on the list, approved a merger on 5 August 2026, and the companies expect to complete it at the end of 2026 or early 2027 if regulators agree. Law keeps forcing recipes to change: limits on solvents since the 1960s, and lead paint laws in 48% of countries by January 2024, by the World Health Organization's count.

What is open

Much of what paint makers know stays in their own records: outdoor exposure results, milling settings, tint recipes and car color formulas. Several open jobs below turn that kind of knowledge into public, checked data, such as grind gauges read from phone photos, car colors measured by paint code and VOC measured in paint after it is tinted. Others put numbers on claims nobody has tested in public, such as the materials sold to replace titanium dioxide and the driers sold to replace cobalt.

Domains

AchievedWatch forOpen

Advances to build with

3 research notes

Open in paint and coatings

3 of 12 open deliverables

Open · Pigments and resins

Titanium dioxide substitutes, compared

A public, side-by-side test of the materials sold to cut titanium dioxide in white wall paint. Make one standard water-based interior paint, replace 25% and 50% of its titanium dioxide by volume with each substitute (hollow plastic spheres, calcined clay, fine calcium carbonate, a cellulose white such as Seprify's if samples can be had), and measure hiding, whiteness, scrub resistance and cost per liter. Hiding is measured as contrast ratio: how much a dry film reflects over a black square compared with over a white one.

Built with what exists

Starting-point wall paint recipes that raw material suppliers publish; a laboratory high-speed disperser; a drawdown bar and black-and-white opacity charts; a handheld spectrophotometer such as the X-Rite Ci64 or Nix Spectro 2; colour-science, an open-source Python library, for whiteness and color difference; a wet-scrub tester at a university or paint test lab (ASTM D2486); a dust mask when handling dry powders.

Credit · unclaimed

Open · Formulation

Cobalt-free driers, compared

A public test, under the same conditions, of every cobalt-free drier on sale. Driers are metal compounds that speed the reaction with air that hardens alkyd paint, and cobalt has long been the standard. Run each in the same two alkyd paints, one solvent-borne and one water-borne, at three doses, with a cobalt drier as the reference, and measure the drying stages, hardness as it develops, yellowing in the dark and drying at 10 °C.

Built with what exists

Drier samples, which makers supply to formulators; a commercial long-oil alkyd and an alkyd emulsion; a mechanical drying-time recorder (ASTM D5895); a König pendulum hardness tester; a spectrophotometer for the yellowness index (ASTM E313); a wine cooler or climate cabinet held at 10 °C; a fume hood for the solvent-borne paint.

Credit · unclaimed

Open · Mixing and milling

Grind gauges read by camera

A public set of photographed fineness-of-grind drawdowns of water-based paints, each read by several trained people, and an open model that reads the gauge from a phone photo. The set then serves to compare people, the phone model and automatic readers on the same drawdowns. The gauge, a steel block with a groove that runs from deep to shallow, shows the largest pigment particles left after milling.

Built with what exists

A Hegman-type gauge and scraper; water-based wall paints and artist acrylics, some stirred too briefly on purpose so they keep coarse particles; a phone on a stand with a low-angle LED light, the dark-field lighting TIDAS also uses; a small open vision model fine-tuned on one GPU, such as one from Liquid AI's LFM3 family (see the Note "One GPU to fine-tune"); an automatic reader borrowed from a paint maker's or a university's lab for the comparison.

Credit · unclaimed

Where it sits