BRENNEN

Industries / Mining and materials / Chemicals and petrochemicals / Specialty chemicals / Paint and coatings

Low-solvent coatings

Low-solvent coatings is the work of cutting the solvents that evaporate from paint as it dries, called volatile organic compounds (VOCs) because they help form smog, by moving to water, to powders and to coatings that harden under light, and by meeting the legal limits that push that change.

7

Milestones achieved, from 1953 to 2015.

2

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1953

    Plastic powder instead of paint

    Erwin Gemmer, an engineer at Knapsack AG in Germany, filed a patent on 8 May 1953, granted in September 1955, for coating hot metal parts by dipping them in plastic powder made to behave like a liquid by air blown up through it, a method called a fluidized bed. Powder coatings carry no solvent. By the account of a 2004 history in PCI, a coatings trade magazine, the French firm SAMES built the first equipment in the early 1960s for spraying powder with electric charge, and Pieter de Lange of Teodur developed a hardening epoxy powder that could be sprayed that way; its first use was on hospital furniture. Between 1966 and 1973 four basic powder chemistries reached the market.

    patents.google.compcimag.com

    Credit

    Erwin Gemmer, Knapsack AG; SAMES; Pieter de Lange, Teodur

  2. 1966

    Smog rule targets solvents

    Los Angeles County's Rule 66 restricted the release of photochemically reactive organic solvents, those that react in sunlight to form smog. An engineer writing in 1967 said that, apart from motor vehicles, solvents were the county's last major source of smog-forming hydrocarbons. Solvent makers set out to develop "exempt" solvents that the rule did not cover.

    LessonA rule that exempts whole classes of solvents lets formulators design around it, and an exempt solvent can carry harms of its own: 1,1,1-trichloroethane, used in finishes in the 1980s because it counted as VOC-exempt, was later found to deplete the ozone layer.

    saemobilus.sae.orgsaemobilus.sae.orgwoodshopnews.com

    Credit

    Los Angeles County Air Pollution Control District

  3. 1998

    National limit for house paint

    The US Environmental Protection Agency set national limits on the VOC content of architectural coatings, the paints and finishes used on buildings, in a rule of 11 September 1998 that covers coatings made from 13 September 1999. Manufacturers and importers must keep each kind of coating under its limit. EPA estimated the rule would cut VOC emissions by 103,000 tonnes a year.

    federalregister.govlaw.cornell.edu

    Credit

    US Environmental Protection Agency, under section 183(e) of the Clean Air Act

  4. 2008

    Counting ozone, not solvent

    EPA's national rule for aerosol spray paints, published on 24 March 2008, limits each product by how much ozone its ingredients can form, not by the weight of its VOCs. EPA said this would cut ozone formation more than a weight limit, by steering makers to less reactive solvents, and it counted some compounds that are otherwise exempt.

    federalregister.gov

    Credit

    US Environmental Protection Agency

  5. 2010

    Europe caps decorative paint VOC

    The EU's Directive 2004/42/EC set maximum VOC contents for decorative paints, varnishes and car refinishing products in two phases, from 1 January 2007 and 1 January 2010. From 2010 an interior matt wall or ceiling paint may hold no more than 30 g/L of VOC, whether it is thinned with water or with solvent; a solvent-borne one had been allowed 400 g/L in the first phase. The limits apply to the paint ready to use, after tinting, so colorant makers such as CPS Color developed lower-VOC colorants to keep tinted paints within them.

    legislation.gov.ukpcimag.com

    Credit

    European Parliament and Council of the EU

  6. 2012

    Zero VOC must include tint

    The US Federal Trade Commission charged Sherwin-Williams and PPG Architectural Finishes over "zero VOC" claims for their Dutch Boy Refresh and Pure Performance paints. It alleged that in numerous instances the paints were not zero-VOC once color was added, and that the companies had no reasonable basis for the claims. Under the consent orders published in November 2012, a zero-VOC claim must hold after tinting or say that it covers only the base paint, and a paint that can reach 50 g/L or more after tinting must say the level rises significantly or give the highest level.

    LessonA VOC figure for the untinted base says little about the can the customer takes home.

    federalregister.govfederalregister.gov

    Credit

    US Federal Trade Commission

  7. 2015

    China taxes high-VOC paint

    From 1 February 2015 China levied a 4% consumption tax on coatings, charged at production, contract processing and import, and exempted coatings whose VOC content as applied is 420 g/L or less.

    jiangsu.chinatax.gov.cn

    Credit

    China's Ministry of Finance and State Administration of Taxation, notice Caishui [2015] No. 16

Watch for

  1. Laser-cured powder on appliances

    Powder coatings are normally melted and hardened in ovens. PPG and IPG Photonics say IPG's PhotoniCURE laser system can cure powder coatings in minutes, with less heat and faster lines than oven or infrared curing. PPG has installed a pilot line at its powder plant in Strongsville, Ohio, and begun trials with Whirlpool on appliance parts. No figures or outside measurements are given.

    Achieved whenWhirlpool or another manufacturer runs laser-cured powder in production and publishes measured energy use, line speed and coating test results against its oven-cured line.

    pcimag.com

    Claimed by

    PPG and IPG Photonics, March 2026

  2. Radiation curing cuts carbon

    Coatings cured by ultraviolet light or electron beams are usually 100% solids, with no solvent to evaporate. PPG says such radiation curing can cut carbon emissions by as much as 65% compared with curing by heat, without naming the baseline, and it has opened a test line for these coatings at its research center in Marly, France.

    Achieved whenan independent life-cycle assessment of a named production line that switched to radiation curing publishes its measured energy use and emissions before and after.

    indianchemicalnews.com

    Claimed by

    PPG, April 2026

Open

  1. 01

    Measure VOC after tinting

    A public table of VOC content measured in store-tinted paints sold as zero- or low-VOC. Buy base paints from major brands in the US, the EU and China, have stores tint each to a white, a mid tone and a deep color, record the colorant amounts from the tinting machine's printout, and have a university lab measure VOC content by gas chromatography. Compare each result with the label, with the 50 g/L line in the FTC's orders and with the legal limit where the paint was bought.

    The brief
    Credit · unclaimed
  2. 02

    Declared VOC against the limits

    A public, product-by-product table of the VOC content that paint makers declare on their data sheets for wall paints, primers, trim paints and wood stains in the US, the EU and China. Each product is matched to its legal category and limit in its region, and every value links to the page it came from.

    The brief
    Credit · unclaimed

Open 01 · the brief

Measure VOC after tinting

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public table of VOC content measured in store-tinted paints sold as zero- or low-VOC. Buy base paints from major brands in the US, the EU and China, have stores tint each to a white, a mid tone and a deep color, record the colorant amounts from the tinting machine's printout, and have a university lab measure VOC content by gas chromatography. Compare each result with the label, with the 50 g/L line in the FTC's orders and with the legal limit where the paint was bought.

Why it is still open

The FTC's 2012 orders rest on its finding that tinted "zero VOC" paints contained VOCs, but no measurements were published with them. A Tsinghua University study (2024) measured 40 water-based paints from top-selling brands and found VOCs at up to 20,000 parts per million in 24 wet samples labeled zero- or low-VOC; its release does not say whether any were tinted. Colorant makers publish VOC figures for the colorant, such as under 300 g/L for one alkyd colorant, not for the tinted paint. A web search found no controlled study of VOC content before and after tinting.

federalregister.goveurekalert.orgapi.crossref.orgpcimag.com

Built with what exists

ASTM D6886, the gas chromatography test method for VOCs in low-VOC air-dry coatings; a university analytical lab's gas chromatograph; paint stores' tinting machines; the makers' data sheets, read with a small extraction model such as Meta's Muse Ember (see the Note "The jobs agents repeat"); Python with pandas for the table.

astm.org

  1. First step

    Buy three zero-VOC bases, have each tinted to a deep red, and work out their expected VOC from the colorant amounts and the colorant data sheets before sending them to a lab.

  2. Done looks like

    30 base paints from at least 10 brands in three countries, each tinted to three colors and measured twice, 180 measurements in all, with repeat measurements agreeing within 10%. A public table gives the label, calculated and measured VOC for each, and the share of tinted paints at 50 g/L or more.

Open 02 · the brief

Declared VOC against the limits

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public, product-by-product table of the VOC content that paint makers declare on their data sheets for wall paints, primers, trim paints and wood stains in the US, the EU and China. Each product is matched to its legal category and limit in its region, and every value links to the page it came from.

Why it is still open

The California Air Resources Board (CARB) collects product-level VOC data in periodic surveys, but makers may mark their answers confidential, the latest survey dates from 2014, and the published results are tables by category. That 2014 survey covered 89 million gallons of coatings and 2 million gallons of colorants sold in California. Searches of the web, GitHub and Hugging Face found no public product-level table across regions.

ww2.arb.ca.govww2.arb.ca.gov

Built with what exists

Makers' published safety and technical data sheets; the US national limits in 40 CFR part 59, subpart D; Annex II of Directive 2004/42/EC for the EU; China's 420 g/L tax line; a small extraction model such as Meta's Muse Ember (see the Note "The jobs agents repeat"), with each value tied to its page; a coding agent that tests its own parsing, such as one built on Inkling 2 Small (see the Note "Checked without being asked").

law.cornell.edulegislation.gov.uk

  1. First step

    Collect the data sheets for every interior wall paint of three makers in one country and enter the declared VOC and category by hand, to settle the columns.

  2. Done looks like

    At least 1,500 products from 30 makers across the three regions. Two people re-extract 150 random rows on their own and agree with the table on at least 95% of VOC values and categories. A published summary shows how far each category sits below its limit, and a person reviews every product that declares more than its limit.