Industries / Mining and materials / Chemicals and petrochemicals / Specialty chemicals / Paint and coatings
Mixing and milling
Mixing and milling is the factory work of breaking clumped pigment powders into fine particles inside the paint's binder, stirring in the rest of the recipe, and tinting each batch to its color.
4
Milestones achieved, from 1952 to 2017.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1952
Sand grinds the pigment
Seymore Hochberg of DuPont patented a way to disperse pigment by stirring it with the binder and coarse sand until a scrape gauge, a steel block with a tapering groove that shows the largest particles left, read no more than 0.0005 inch. The patent lists the machines used before it, including stone, ball, pebble and roller mills, and says the fastest earlier process for lacquers took 6 to 8 hours. It allowed glass beads in place of sand and claimed a continuous version, filed in 1948 and granted in 1952. Other makers built on the idea: in 1976 Netzsch announced a continuous bead mill with a horizontal grinding chamber, designed to hold back grinding beads as small as about 0.25 mm.
Credit
Seymore Hochberg, DuPont
1976
Tinting moves to the shop
In the 1960s Jotun, a Norwegian paint maker, tinted paint at the factory and shipped each color to dealers; some interior paints came in up to 35 colors, many sold in small batches, which made them costly to stock. In 1976 Jotun and technical partners launched Multicolor, a computer-run machine that tints a base paint in the shop. Machine makers followed: Corob, in Italy, launched its first fully automatic dispenser that doses all the colorants at once, the AC10000, in 1984, and now sells dispensers from shop counters to large plants. Jotun says such machines are found in almost every store that sells decorative paint.
Credit
Jotun and its technical partners; Corob
2006
A heated tank explodes
At about 2:46 a.m. on 22 November 2006 a building in Danvers, Massachusetts, shared by the ink maker CAI and the paint maker Arnel, exploded and burned. The US Chemical Safety Board (CSB) found that steam heat had most likely been left on overnight in a 3,000-gallon mixing tank of ink base that held heptane and propyl alcohol. The heat was controlled by one manual valve, the ventilation was routinely shut off at night, and there were no automatic controls or alarms, so solvent vapor from the open tank filled the building until something ignited it. At least 16 homes and three businesses were damaged beyond repair, and about ten residents were treated in hospital. The CSB named the company's failure to carry out a hazard analysis as the underlying cause and recommended that the fire-code bodies NFPA and ICC prohibit heating flammable liquids indoors in unsealed tanks that do not vent outside.
LessonHeating a solvent mixture needs an automatic cutoff, because a manual valve depends on one person remembering to close it.
Credit
US Chemical Safety Board
2017
One computer runs a plant
AkzoNobel opened its paint plant in Ashington, north-east England, on 12 September 2017, built for more than £100 million and able, the company said, to make 200 million litres a year of Dulux and its other brands in up to 33,000 colors. AkzoNobel says one integrated computer system manages all manufacturing there, and that every key step from ordering raw materials to shipping finished paint can start without an operator. In September 2019 it reported making one million litres in one week, against about 500,000 litres a week a year earlier.
Credit
AkzoNobel
Watch for
Automated mixing for truck repairs
Refinish paint for vehicle repairs is mixed from a formula at the repair shop. Sherwin-Williams Automotive Finishes says Collision Core Pronto XL, a fully automated dispenser for commercial-vehicle repair shops, mixes batches from 32 ounces to 5 gallons from one dispensing head holding 20 ingredients, doses to within 0.01 g, and finishes a mix in about 5 minutes, which it calls 50% faster than traditional methods.
Achieved whena repair shop or an outside lab publishes timed mixes and check-weighings against hand mixing over several months of use.
Claimed by
Sherwin-Williams, May 2026
Open
01
Grind gauges read by camera
A public set of photographed fineness-of-grind drawdowns of water-based paints, each read by several trained people, and an open model that reads the gauge from a phone photo. The set then serves to compare people, the phone model and automatic readers on the same drawdowns. The gauge, a steel block with a groove that runs from deep to shallow, shows the largest pigment particles left after milling.
The briefCredit · unclaimed02
Open milling curves for pigments
A public table of how fast common paint pigments break down in a lab bead mill: particle size, color strength and grind-gauge reading at set times, for each pigment in a water-based mill base at two dispersant levels, with mill speed, bead size and power recorded. Add a simple model that predicts how long a new pigment needs to reach a target fineness, scored on pigments left out of training.
The briefCredit · unclaimed
Open 01 · the brief
Grind gauges read by camera
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public set of photographed fineness-of-grind drawdowns of water-based paints, each read by several trained people, and an open model that reads the gauge from a phone photo. The set then serves to compare people, the phone model and automatic readers on the same drawdowns. The gauge, a steel block with a groove that runs from deep to shallow, shows the largest pigment particles left after milling.
Why it is still open
The gauge is still read by eye under ASTM D1210, and the published comparisons of readers come from the companies that sell automatic ones. Labman, maker of the TIDAS reader, showed seven gauge images to six operators and found readings up to 14 µm apart for the same image. A 2025 article by the general manager of BEVS, which sells an automatic fineness meter, reports automatic readings as more accurate and repeatable, without an outside check, and finds that readings taken 8 seconds or more after scraping come out higher. Searches of Zenodo, Hugging Face and GitHub for this file found no public set of grind-gauge images.
Built with what exists
A Hegman-type gauge and scraper; water-based wall paints and artist acrylics, some stirred too briefly on purpose so they keep coarse particles; a phone on a stand with a low-angle LED light, the dark-field lighting TIDAS also uses; a small open vision model fine-tuned on one GPU, such as one from Liquid AI's LFM3 family (see the Note "One GPU to fine-tune"); an automatic reader borrowed from a paint maker's or a university's lab for the comparison.
First step
Make 20 drawdowns of four paints, photograph each at once, and have three people read them separately.
Done looks like
300 drawdowns of at least 15 paints, each photographed within 5 seconds of scraping and read by five trained people; the spread between people reported; the phone model within 5 µm of the people's median reading on at least 90% of 60 held-out drawdowns; images, readings and code published under an open license.
Open 02 · the brief
Open milling curves for pigments
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public table of how fast common paint pigments break down in a lab bead mill: particle size, color strength and grind-gauge reading at set times, for each pigment in a water-based mill base at two dispersant levels, with mill speed, bead size and power recorded. Add a simple model that predicts how long a new pigment needs to reach a target fineness, scored on pigments left out of training.
Why it is still open
A bead-mill maker's guide notes that at fixed settings a mill base's color strength stops rising after a certain milling time, and that only a higher speed raises it further. Searches of Zenodo, Hugging Face and Crossref for this file found no published set of measured milling curves for paint pigments. The nearest public record holds computer simulations of a lab-scale stirred media mill, with no pigment measurements.
Built with what exists
A laboratory bead mill such as the DISPERMAT SL, with glass or zirconium oxide beads; pigments sold for water-based paint (titanium dioxide, iron oxides, phthalocyanine blue), handled with a dust mask as their safety data sheets direct; a laser diffraction particle sizer in a university lab; a Hegman-type gauge; a spectrophotometer for color strength; Python with scikit-learn.
First step
Mill one titanium dioxide mill base, take samples at 5, 10, 20, 40 and 60 minutes, and measure each by laser diffraction and by grind gauge.
Done looks like
20 pigments at two dispersant levels, each sampled at six milling times; the model predicts the time to reach the target fineness within 25% for at least four of five held-out pigments; data and code published under an open license.