BRENNEN

Industries / Mining and materials / Chemicals and petrochemicals / Specialty chemicals / Paint and coatings

Pigments and resins

Pigments are the fine powders that give paint its color and its power to hide what is underneath, and resins, also called binders, are the oils and plastics that form the film and hold the pigment to the surface.

7

Milestones achieved, from c. 1706 to 2025.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. c. 1706

    A cheap blue that lasts

    Johann Jacob Diesbach, a Swiss color maker working in Berlin in the laboratory of the alchemist Johann Konrad Dippel, was trying to make a red from cochineal when impure potash turned his batch deep blue. Until then the only bright blue that did not fade was ultramarine ground from lapis lazuli, which the Swiss National Museum says cost as much per ounce as gold. The Dutch painter Pieter van der Werff was using the new Prussian blue by 1709, and the English doctor John Woodward published its recipe in 1724.

    blog.nationalmuseum.ch

    Credit

    Johann Jacob Diesbach and Johann Konrad Dippel

  2. 1916

    Titanium white at scale

    In 1910 the Norwegian chemist Peder Farup found that digesting titanium ore in sulfuric acid gave nearly pure titanium dioxide, a white pigment that, unlike lead white, is not poisonous. Mass production began at Fredrikstad, Norway, in 1916; the first product was sold as "old India ivory" because iron impurities left it off-white. Kronos, which runs the plant today, calls it the world's first titanium dioxide factory.

    worksinprogress.cokronosww.com

    Credit

    Peder Farup; the Fredrikstad company now called Kronos Titan

  3. 1935

    Phthalocyanine blue on sale

    Early in 1928 chemists at Scottish Dyes in Grangemouth, Scotland, examined a blue substance found in a pot used to make phthalimide; H. de Diesbach and E. von der Weid at the University of Fribourg had made the copper form by accident in 1927. R. P. Linstead at the Royal College of Science worked out the structure by 1934, and ICI put copper phthalocyanine on the market in 1935 as Monastral Fast Blue B. The Museum of Fine Arts, Boston says phthalocyanine blue has replaced all other blue pigments in industrial coatings, because light, chemicals and heat do not harm it.

    LessonThe first commercial crystal form grew crystals and changed shade in paints made with aromatic solvents, and adding a little chlorine to the molecule became the main fix, so a pigment's crystal form matters as much as its chemistry.

    chimia.chcameo.mfa.org

    Credit

    Dandridge, Drescher, Dunworth and Thomas at Scottish Dyes; R. P. Linstead; ICI

  4. 1936

    Alkyd patent struck down

    Alkyd resins are made from an alcohol with several reactive groups, such as glycerol, and an acid such as phthalic anhydride. General Electric's Kienle patent, filed in 1927 and granted in 1933, covered alkyds made with the fatty acids of drying oils so that they "can be fully hardened or set at ordinary room temperature", which suits them to paint. In February 1936 the US Court of Appeals for the Second Circuit held it invalid: putting a drying-oil acid in place of the non-drying acids of earlier patents was a result a chemist could predict. Alkyds went on to bind baked enamels for appliances and cars and, with more oil, house paints and varnishes, by the account of the Museum of Fine Arts, Boston.

    LessonA change to a recipe that a skilled chemist could foresee is not an invention, however much it sells.

    hallapproved.comcameo.mfa.org

    Credit

    Kienle and General Electric (patent holder); US Court of Appeals for the Second Circuit, General Electric Co. v. Paramet Chemical Corp

  5. 1953

    Acrylic binder for house paint

    Rohm and Haas scientists developed Rhoplex AC-33 in 1953, an acrylic binder dispersed in water that keeps paint ingredients from separating and helps paint stick to surfaces. In 2008 the American Chemical Society named the company's acrylic emulsion work a National Historic Chemical Landmark and said that by 1978 acrylic emulsions had all but replaced oil-based exterior paints in the US market. By 1962 Rohm and Haas was publishing nine years of outdoor results for acrylic exterior paints on different surfaces.

    eurekalert.orgdigital.sciencehistory.org

    Credit

    Rohm and Haas

  6. 2020

    A new blue cleared

    In 2009 Mas Subramanian's team at Oregon State University heated manganese oxide with other chemicals to nearly 2,000 °F (about 1,100 °C) while looking for electronic materials, and one sample came out blue: YInMn blue, an oxide of yttrium, indium and manganese. The university calls it the first new inorganic blue in more than 200 years. The US Environmental Protection Agency allowed limited use in industrial coatings and plastics in 2017 and full commercial use, including artists' paints, in 2020; the Shepherd Color Company sells it as Blue10G513. It reflects infrared light, which can help keep painted buildings cool.

    LessonNew pigments are still found mostly by chance, as Oregon State says this one was.

    news.oregonstate.edu

    Credit

    Mas Subramanian and colleagues, Oregon State University; Shepherd Color Company

  7. 2025

    Titanium dioxide label annulled

    In 2019 the European Commission classified titanium dioxide, a white pigment used in paints, medicines, food and toys, as a suspected cause of cancer when inhaled, in powder form containing 1% or more of particles 10 micrometers across or smaller. Makers, importers and users, among them CWS Powder Coatings, challenged it. On 23 November 2022 the EU General Court annulled the classification, finding a manifest error in how the Commission judged the reliability of the study it rested on, and on 1 August 2025 the Court of Justice dismissed the appeals of France and the Commission.

    LessonA hazard classification is only as sound as the assessment of the study behind it; the court found that the EU risk committee had not weighed all the relevant factors.

    curia.europa.eu

    Credit

    the General Court and Court of Justice of the EU; CWS Powder Coatings and the other applicants

Watch for

  1. Cellulose white for paint

    Seprify, a Swiss company, says its cellulose-based white pigment SilvaFolia lets formulators reduce their reliance on titanium dioxide while keeping key optical and surface properties, that it has completed performance testing, and that it is available for large-scale commercial trials. In July 2026 its distributor Grolman Group took it into coatings, paints and inks in Europe and Turkey. No opacity or whiteness figures and no paint customer are named.

    Achieved whena paint maker sells a paint containing it, or an outside lab publishes hiding and whiteness measurements at a stated level of titanium dioxide replaced.

    pcimag.com

    Claimed by

    Seprify, July 2026

Open

  1. 01

    Titanium dioxide substitutes, compared

    A public, side-by-side test of the materials sold to cut titanium dioxide in white wall paint. Make one standard water-based interior paint, replace 25% and 50% of its titanium dioxide by volume with each substitute (hollow plastic spheres, calcined clay, fine calcium carbonate, a cellulose white such as Seprify's if samples can be had), and measure hiding, whiteness, scrub resistance and cost per liter. Hiding is measured as contrast ratio: how much a dry film reflects over a black square compared with over a white one.

    The brief
    Credit · unclaimed
  2. 02

    Pigments screened by computer

    A ranked public shortlist of inorganic compounds that could become new, non-toxic paint pigments, screened from an open materials database by predicted color, stability and the absence of toxic elements such as cadmium, chromium, cobalt and lead. A partner university lab then makes the top ten, and their measured colors are compared with the predictions.

    The brief
    Credit · unclaimed

Open 01 · the brief

Titanium dioxide substitutes, compared

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public, side-by-side test of the materials sold to cut titanium dioxide in white wall paint. Make one standard water-based interior paint, replace 25% and 50% of its titanium dioxide by volume with each substitute (hollow plastic spheres, calcined clay, fine calcium carbonate, a cellulose white such as Seprify's if samples can be had), and measure hiding, whiteness, scrub resistance and cost per liter. Hiding is measured as contrast ratio: how much a dry film reflects over a black square compared with over a white one.

Why it is still open

Makers of substitutes publish claims without numbers that others can check. Seprify says its cellulose white has completed performance testing but gives no opacity figures, and a 2020 article by the owner of RAW Paints claims a paint with no titanium dioxide that covers in one coat, with no hiding measurements. Published studies test one substitute at a time, such as calcined clay in latex paint (Narayan and Raju, 2000), and searches for this file found no public head-to-head with its data.

pcimag.compcimag.comapi.crossref.org

Built with what exists

Starting-point wall paint recipes that raw material suppliers publish; a laboratory high-speed disperser; a drawdown bar and black-and-white opacity charts; a handheld spectrophotometer such as the X-Rite Ci64 or Nix Spectro 2; colour-science, an open-source Python library, for whiteness and color difference; a wet-scrub tester at a university or paint test lab (ASTM D2486); a dust mask when handling dry powders.

  1. First step

    Make the standard paint with no substitute and measure ten drawdowns, to learn how much the contrast ratio varies from film to film before comparing anything.

  2. Done looks like

    At least six substitutes at two replacement levels, each paint made twice and each film measured three times; contrast ratio (ISO 6504-3), whiteness, scrub cycles and cost per liter at stated raw material prices, published with every recipe under an open license; a second lab remakes three of the paints and matches their contrast ratio within 0.5 percentage points.

Open 02 · the brief

Pigments screened by computer

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A ranked public shortlist of inorganic compounds that could become new, non-toxic paint pigments, screened from an open materials database by predicted color, stability and the absence of toxic elements such as cadmium, chromium, cobalt and lead. A partner university lab then makes the top ten, and their measured colors are compared with the predictions.

Why it is still open

YInMn blue, which Oregon State calls the first new inorganic blue in more than 200 years, came from a sample made for electronics research that happened to turn blue. Machine learning has found new light-emitting phosphors with a designed color, which were then made and confirmed (Koyama and colleagues, Materials Advances, 2023), but searches of the web, Crossref and GitHub for this file found no published screen of a whole database for paint pigments followed by making the candidates.

news.oregonstate.eduapi.crossref.org

Built with what exists

The Materials Project's open database and API, with pymatgen, its open-source Python library, to filter compounds by composition, predicted stability and computed band gap; MatterGen, Microsoft's open-source (MIT-licensed) generative model for inorganic materials, to propose compounds not yet in the database; a coding agent that writes and tests the screening code, such as one built on Inkling 2 Small (see the Note "Checked without being asked"); for the measurements, the pigments ground into a standard acrylic binder and read with a spectrophotometer.

  1. First step

    Download every oxide in the Materials Project that is predicted stable, holds no cadmium, chromium, cobalt or lead, and has a computed band gap between 1.7 and 3.2 electronvolts, the energy range of visible light, and count them.

  2. Done looks like

    A shortlist of 100 candidates, each with its predicted color and the reasons it passed, published with the code; ten made by the partner lab; for each, the measured color in CIELAB values set beside the prediction, with the predicted hue within 30 degrees of hue angle for at least six of the ten.