BRENNEN

Industries / Industrial equipment and services

Heavy equipment manufacturing

Heavy equipment manufacturing is designing, building, testing and servicing the large self-propelled machines that dig, lift, push and pull on building sites, mines and farms, such as excavators, loaders, dozers, cranes and tractors.

1839

On 24 February 1839 the US Patent Office granted William S. Otis, a civil engineer from Philadelphia, patent 1,089 for a "crane-excavator for excavating and removing earth", a steam-driven scoop on a crane, for digging railroads and canals. The Association of Equipment Manufacturers dates his first steam shovel to 1835 and calls it "the grandfather of all construction machines", since no records exist of any powered construction machine working before it.

patents.google.comaem.org

32

Milestones achieved across 6 domains.

11

To watch for: announced, not yet confirmed outside.

12

Open deliverables. Nobody has shipped them.

In one minute

Where it started

The first powered digging machine, William Otis's steam shovel, dug American railroads from the 1830s. Benjamin Holt's track-type tractor of 1904, Ford's assembly-line Fordson of 1917 and Caterpillar's diesel crawler of 1931 made big machines cheaper to build and run. Harry Ferguson's hydraulic three-point hitch and the first hydraulic excavators, built in the US, Italy, France and Germany from the late 1940s, replaced cables and levers with oil under pressure.

Where it stands

International Construction's Yellow Table counted US$246.6 billion of sales by the 50 largest construction equipment makers in 2025, a record. Caterpillar ranked first and Komatsu second, and XCMG says it ranked third, ahead of every other Chinese maker; Chinese makers held 1.6% of the table in 2003. Driverless haul trucks are routine in big mines, most US row-crop acres are farmed with satellite steering, electric loaders took 17.1% of China's loader sales in early 2025, and a Colorado law, an EU law and a US antitrust settlement with Deere are opening up repair tools and machine data that makers once kept for their dealers.

What is open

Many checks in building and keeping these machines are still done by eye or measured only by the maker: grading welds, finding cracks in booms, reading oil-filter patches, comparing the energy use of hydraulic designs. Battery sizes for electric machines are chosen with little public data on how machines are really worked, and published trials of people-detection cameras count alarms, not the people they missed. Phone cameras, open vision and robot models, cheap data loggers and open simulation tools now let a small team build these checks and publish results others can repeat.

Domains

AchievedWatch forOpen

Figureheads

1 person

Advances to build with

1 research note

Open in heavy equipment manufacturing

3 of 12 open deliverables

Open · Structures and welding

Inspector-graded photos of heavy welds

An open set of photos of welds on steel plate 10 to 40 mm thick, the kind used in booms and frames, each graded by two certified welding inspectors to the three quality levels of ISO 5817 (B is the strictest, D the loosest), with each imperfection named; and a baseline model that grades a new photo. Welder qualification test plates, which are later cut and bent to see whether the weld cracks, give a check that does not depend on the inspectors.

Built with what exists

A phone camera on a fixed-distance holder with a ring light; Label Studio for labels; LoHi-WELD for pretraining; an Ultralytics YOLO11 detector for imperfections; Google's Gemini Decision 1, which returns a probability for each answer on a fixed scale instead of writing text, for the B, C or D grade (see the Note "A thousand questions, one pass").

Credit · unclaimed

Open · Engines and drivetrains

Open duty cycles for batteries

A public library of real working days for diesel and electric construction machines, logged once a second: engine or motor speed and load, fuel or battery use, and what the machine was doing. With it, a calculator that tells a maker or buyer what share of those days a battery of a given size (in kWh) would last.

Built with what exists

CSS Electronics' CANedge loggers, which record the J1939 data network that diesel machines use (by the maker's case study, JCB engineers use them on wheel loaders and excavators); the open-source asammdf and python-can libraries with a J1939 decoding file; Python and pandas for the calculator.

Credit · unclaimed

Open · Hydraulics

Phone reader for patch tests

A phone app with a clip-on microscope that photographs a patch test and estimates the oil's ISO 4406 cleanliness code, a three-number code, such as 12/10/07, for the number of particles in three size bands. In a patch test, a technician pulls a measured volume of hydraulic oil through a fine filter membrane and judges the dirt left on it. Dirty oil wears pumps and valves, and many machine owners run this test in the field instead of sending oil to a lab.

Built with what exists

An Android phone; a clip-on or USB microscope; a membrane patch test kit; OpenCV and scikit-image to count particles; an Ultralytics YOLO11 model to tell particles from fibers; a commercial oil lab with an automatic particle counter for reference counts.

Credit · unclaimed