BRENNEN

Industries / Industrial equipment and services / Heavy equipment manufacturing

Service and parts

Keeping machines working after sale: the dealers, spare parts, rebuilt components, fluid tests and repair software that owners and mechanics depend on.

6

Milestones achieved, from 1919 to 2026.

3

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1919

    Parts depots by law

    Wilmot Crozier, the Nebraska farmer behind the state's tractor test (see Assembly and test), had also struggled to get parts and repairs for his unreliable tractor, since no one offered them in Nebraska. So the same 1919 law required at least one tractor parts warehouse and one repair facility in Nebraska. The University of Nebraska says these provisions remain largely unchanged.

    tractortestlab.unl.edu

    Credit

    Wilmot Crozier and Senator Charles Warner

  2. 1972

    Worn engines made new

    Remanufacturing rebuilds a used part, called a core, to the specification of a new one. Caterpillar's remanufacturing began in 1972, Assembly magazine reported in 2003. By then Caterpillar dealers sent its receiving plant in Corinth, Mississippi, an average of 160 tons of worn engines, pumps, cylinder packs and other assemblies a day. Engines were brought up to current design standards, tested and given the same warranty as new ones, and Caterpillar estimated that an engine could be remanufactured at least three times.

    LessonParts made lighter to save energy are harder to remanufacture and can be reused fewer times, plant staff told the magazine.

    assemblymag.com

    Credit

    Caterpillar

  3. 2015

    Owners may bypass locks

    A rule published on 28 October 2015 by the US Copyright Office let the owner of a car, truck or "mechanized agricultural vehicle" break the technical locks on the software in its electronic control units when that is needed to diagnose, repair or lawfully modify it, without violating the Digital Millennium Copyright Act (DMCA). The exemption began 12 months after the rule and left out telematics and entertainment software. The Association of Equipment Manufacturers and John Deere were among the opponents.

    federalregister.gov

    Credit

    US Copyright Office and Library of Congress, on petitions from the Electronic Frontier Foundation and others

  4. 2023

    Colorado's farm repair law

    Colorado's governor signed HB23-1011 on 25 April 2023, and it took effect on 1 January 2024. It requires makers of farm equipment to provide parts, embedded software, firmware, tools and documentation to owners and independent repair shops, and treats failure to do so as a deceptive trade practice. PIRG, a consumer group that campaigned for the bill, calls it the first right-to-repair law for farm equipment.

    LessonVoluntary promises had fallen short. Dealers did not have the tools promised from 2021 under a 2018 industry pledge, VICE's Motherboard found, and PIRG's 2023 comparison found that the customer version of Deere's repair software withheld information and functions that the dealer version had.

    leg.colorado.govpirg.orgpirg.org

    Credit

    Colorado General Assembly

  5. 2025

    Owners get machine data

    From 12 September 2025 the EU Data Act gives the users of connected products, which include machines that send telematics data (operating data sent over a mobile network), the right to get the data their product generates and to have it passed to a third party, such as an independent repairer, free of charge to the user. Products placed on the market after 12 September 2026 must be designed so that users can reach that data directly. The Act's preamble says users had been unable to get the data needed to use repair and other services.

    eur-lex.europa.eu

    Credit

    European Parliament and Council of the European Union, Regulation (EU) 2023/2854

  6. 2026

    Deere settles repair case

    On 8 July 2026 the US Federal Trade Commission (FTC) and five states announced a settlement of the antitrust suit they had brought against Deere & Company in January 2025 over its repair restrictions. For 10 years Deere must offer every owner and independent repair provider, on fair and reasonable terms, repair resources equivalent to those it gives its dealers, including its Operations Center PRO Service software and the solutions of its Dealer Technical Assistance Center. In April 2026 Deere had agreed to pay $99 million to settle a farmers' class action over repair.

    nationalaglawcenter.orgpirg.org

    Credit

    the FTC, with Illinois, Minnesota, Arizona, Michigan and Wisconsin

Watch for

  1. Dealer tools for every owner

    Under the settlement, most Deere repair resources were due to owners and independent shops on 8 July 2026, and the rest, including offline reprogramming and diagnostics and "Deere Machine Health Insights", by 31 December 2026.

    Achieved whenan independent test shows owners and independent shops completing the same software repair tasks as dealer technicians on Deere machines, including offline reprogramming.

    nationalaglawcenter.org

    Claimed by

    the FTC and five states, in an order Deere agreed to, July 2026

  2. Diagnosis by voice

    Zoomlion says its voice-based AI diagnostic system identifies machine faults remotely with over 95% accuracy and supports troubleshooting around the clock.

    Achieved whenan outside party tests it on recorded real fault cases, each fault confirmed by the repair that fixed it, and publishes the accuracy.

    technode.global

    Claimed by

    Zoomlion, January 2026

  3. An assistant in the cab

    Caterpillar says its Cat AI Assistant will be built into bulldozers, excavators, scrapers and other machines, answering by voice, guiding troubleshooting and recommending parts and maintenance.

    Achieved whenit is in routine use on customer machines and an outside study measures its effect on repair outcomes, such as how often a fault is fixed on the first visit.

    assemblymag.com

    Claimed by

    Caterpillar, January 2026

Open

  1. 01

    Checking the repair settlement

    A public, repeatable test of whether owners and independent shops can do with Deere's paid tools what dealers can, as the July 2026 settlement requires. Turn the settlement's Appendix A list of repair resources into about 30 common electronic tasks, such as reading and clearing fault codes, running calibrations, and "reprogramming" a replaced part so the machine accepts it. Owners and independent mechanics attempt each task on their own parked machines with Operations Center PRO Service, and a dealer technician does the same for comparison. The builder only designs the test and collects the records.

    The brief
    Credit · unclaimed
  2. 02

    An open oil-analysis dataset

    A public dataset of used-oil test results from the engines, transmissions and hydraulic systems of construction and farm machines, each linked to what happened next: a repair, a failure or nothing. Oil analysis measures wear metals, dirt, and fuel or coolant in a small oil sample, so a lab can warn of damage before a part fails. Add a baseline model that flags the samples that came before a failure.

    The brief
    Credit · unclaimed

Open 01 · the brief

Checking the repair settlement

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public, repeatable test of whether owners and independent shops can do with Deere's paid tools what dealers can, as the July 2026 settlement requires. Turn the settlement's Appendix A list of repair resources into about 30 common electronic tasks, such as reading and clearing fault codes, running calibrations, and "reprogramming" a replaced part so the machine accepts it. Owners and independent mechanics attempt each task on their own parked machines with Operations Center PRO Service, and a dealer technician does the same for comparison. The builder only designs the test and collects the records.

Why it is still open

PIRG's 2023 report "Service Obstructor" compared screens of Deere's customer and dealer tools before the settlement. It found the customer tool redacted fault descriptions and could not reprogram parts, but it did not count repairs completed. Parts of the settlement roll out only by 31 December 2026. Searches in November 2026 found no task-by-task test of the tools since the settlement.

pirg.orgnationalaglawcenter.org

Built with what exists

Operations Center PRO Service licenses held by the shops taking part; screen-recording software; a shared spreadsheet or form; the settlement text as the checklist.

  1. First step

    Write the checklist from Appendix A and recruit three independent farm-equipment shops that already hold PRO Service licenses.

  2. Done looks like

    At least 30 tasks on at least three machine models, each attempted by at least two independent shops, published as a table of tasks completed, blocked or needing a dealer, with time, cost and screen recordings, and repeated after 31 December 2026.

Open 02 · the brief

An open oil-analysis dataset

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public dataset of used-oil test results from the engines, transmissions and hydraulic systems of construction and farm machines, each linked to what happened next: a repair, a failure or nothing. Oil analysis measures wear metals, dirt, and fuel or coolant in a small oil sample, so a lab can warn of damage before a part fails. Add a baseline model that flags the samples that came before a failure.

Why it is still open

A 2024 survey of 110 public data sets on machine wear and failure (Mauthe and colleagues) lists none built on oil analysis. The closest open fleet data, Scania's Component X set from heavy trucks, holds operating counters and repair records, not oil results. Searches in November 2026 found no open set linking oil analysis to failures in heavy machines.

arxiv.orgarxiv.org

Built with what exists

Public-records requests to government fleets that send oil samples to labs; pandas; scikit-learn or LightGBM for the baseline; the lifelines library for time-to-failure analysis; Zenodo to publish with a data card.

  1. First step

    Send records requests to five state transportation departments for oil analysis reports and work orders on their loaders, graders and excavators since 2015.

  2. Done looks like

    At least 10,000 samples from at least 500 machines with their work-order outcomes, released under an open license, and a baseline whose precision and recall for failures within 500 operating hours of a sample, on machines it was not trained on, are published beside the labs' own severity flags.