BRENNEN

Industries / Industrial equipment and services / Heavy equipment manufacturing

Structures and welding

Designing and building the steel skeleton of a machine, from frames, booms, arms and buckets to crane towers and jibs, and making the welds that hold it together.

4

Milestones achieved, from 1949 to 2008.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1949

    A tower crane that travels

    Hans Liebherr, who ran his parents' building firm in southern Germany, developed the TK 10 tower crane in 1949. It could be moved easily and set up quickly on a building site. Liebherr's own history calls it the first mobile tower crane. It was the first product of Hans Liebherr Maschinenfabrik in Kirchdorf, and building cranes turned the construction firm into a maker of construction machines.

    liebherr.com

    Credit

    Hans Liebherr, with his design engineers and tradesmen

  2. 1974

    Wear plate shops can weld

    Wear plate is the hard steel that lines buckets and dump bodies so they last longer against rock and gravel. SSAB launched one in 1974 under the name OX AR 360 S, made at its mill in Oxelösund, Sweden, and later sold as Hardox 400. SSAB says it was the first wear plate that an ordinary workshop could cut, bend, weld and machine without trouble. Hardox grades now span 350 to 640 on the Brinell hardness scale (HBW), and SSAB markets them for buckets, attachments and dump bodies.

    LessonThe first plates were hard and tough but not flat, and only a new leveling line at Oxelösund in 1976 fixed that (SSAB).

    ssab.comssab.com

    Credit

    SSAB's Oxelösund mill; SSAB credits Lennart Bergqvist's team with winning customers over

  3. 1998

    Robots weld the big parts

    Volvo Construction Equipment's plant in Shippensburg, Pennsylvania, which builds wheel loaders and compactors, bought its first CLOOS welding robot in 1998 to weld compactor drums of different lengths and diameters. By April 2026 it ran 12 CLOOS systems, ASSEMBLY magazine reported. At Volvo CE's Braås plant in Sweden, robot cells weld the load-carrying parts of articulated haulers from steel plate 6 to 20 mm thick. In 2026 Valk Welding replaced a robot system there that was about 20 years old and raised the robots per cell from two to four.

    assemblymag.comifr.org

    Credit

    Volvo CE, with the robot suppliers CLOOS and Valk Welding

  4. 2008

    A crane's weld on trial

    On 30 May 2008 a Kodiak tower crane collapsed at East 91st Street in Manhattan, killing the crane operator, Donald Leo, and a worker, Ramadan Kurtaj. New York City's buildings department said its forensic experts were focusing on "a particular weld that failed" and ordered the four other Kodiak cranes in the city re-inspected. Reports said the weld joined the turntable, the part that lets the crane rotate, to its base. Prosecutors argued that the owner's mechanic had replaced a cracked turntable with an assembly from an unestablished Chinese maker to save time and money. The defense argued that the operator had "two-blocked" the crane, pulling the hook block up into the top of the jib. The owner, James Lomma, was acquitted of manslaughter in April 2012; the mechanic had pleaded guilty to criminally negligent homicide in 2011; and in 2015 a civil jury found Lomma liable and ordered $96 million paid to the victims' families.

    LessonWhen a weld on a replaced load-bearing part fails, the cause can stay disputed for years, and here a criminal judge and a civil jury reached different verdicts about the same crane.

    cranebriefing.comenr.comenr.com

    Credit

    a failure; investigation by the New York City Department of Buildings and the Manhattan District Attorney, reported by KHL's Crane Briefing and Engineering News-Record (ENR)

Watch for

  1. Lights-out welding of big parts

    Volvo CE's Shippensburg plant says a new CLOOS welding cell, fed by an autonomous mobile robot (a self-driving cart) and a two-axis positioner that turns the part, welds large assemblies "at least a third faster" than before and can run "lights out", with no staff present. ASSEMBLY magazine reports the claim without a method or baseline. A Valk Welding case study of Volvo CE's Braås plant likewise says manual welding time fell "significantly", without figures.

    Achieved whenthe plant publishes before-and-after cycle times and weld repair rates, or an outside party measures them.

    assemblymag.comifr.org

    Claimed by

    Volvo CE managers Nate Alleman and Justin Brindle, April 2026; Valk Welding and Volvo CE, November 2026

Open

  1. 01

    Inspector-graded photos of heavy welds

    An open set of photos of welds on steel plate 10 to 40 mm thick, the kind used in booms and frames, each graded by two certified welding inspectors to the three quality levels of ISO 5817 (B is the strictest, D the loosest), with each imperfection named; and a baseline model that grades a new photo. Welder qualification test plates, which are later cut and bent to see whether the weld cracks, give a check that does not depend on the inspectors.

    The brief
    Credit · unclaimed
  2. 02

    Crack finder for machine booms

    A model that marks likely fatigue cracks at weld toes, the edge where weld metal meets the plate, in photos of excavator booms, arms and crane jibs. Fatigue cracks grow there under years of repeated loading. The model is checked against magnetic particle testing, in which iron powder gathers along cracks in magnetized steel.

    The brief
    Credit · unclaimed

Open 01 · the brief

Inspector-graded photos of heavy welds

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An open set of photos of welds on steel plate 10 to 40 mm thick, the kind used in booms and frames, each graded by two certified welding inspectors to the three quality levels of ISO 5817 (B is the strictest, D the loosest), with each imperfection named; and a baseline model that grades a new photo. Welder qualification test plates, which are later cut and bent to see whether the weld cracks, give a check that does not depend on the inspectors.

Why it is still open

Public weld image sets label defect types, not quality levels. LoHi-WELD has 3,022 images from robotic metal active gas welding with four defect types, and its authors' best model scores 0.69 to 0.77 mean average precision. A 2026 Mendeley set has 448 image tiles cut from 71 smartphone photos of manual arc welds on medium-carbon steel, with three defect types. The nearest graded work, from AGH University of Krakow (2026), sorted 400 images of cladding welds into acceptable and unacceptable with certified inspectors, and a 2025 fillet-weld study by Diaz-Cano and colleagues reported over 97% success on good-or-bad and three-defect tasks with its own images. A 2024 set on IEEE DataPort is labeled by welding inspectors as acceptable or defective, by weld type and by defect, but not by ISO 5817 level. Searches in November 2026 found no public set of thick structural welds graded to the ISO 5817 levels with the inspectors' agreement reported.

github.comdata.mendeley.comwydawnictwo.pan.plapi.crossref.orgieee-dataport.org

Built with what exists

A phone camera on a fixed-distance holder with a ring light; Label Studio for labels; LoHi-WELD for pretraining; an Ultralytics YOLO11 detector for imperfections; Google's Gemini Decision 1, which returns a probability for each answer on a fixed scale instead of writing text, for the B, C or D grade (see the Note "A thousand questions, one pass").

  1. First step

    Ask a welding school for permission to photograph 100 qualification test plates before they are cut for bend tests, and record each plate's test result.

  2. Done looks like

    2,000 weld photos from at least five fabrication shops or welding schools, each graded by two inspectors. The model's agreement with each inspector (weighted kappa) is at least as high as the inspectors' agreement with each other. For 200 test plates that were later bend-tested, the share of bend-test failures the model graded below level C is published, with the photos under an open license.

Open 02 · the brief

Crack finder for machine booms

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A model that marks likely fatigue cracks at weld toes, the edge where weld metal meets the plate, in photos of excavator booms, arms and crane jibs. Fatigue cracks grow there under years of repeated loading. The model is checked against magnetic particle testing, in which iron powder gathers along cracks in magnetized steel.

Why it is still open

Image models for fatigue cracks have been trained on steel bridges: 120 high-resolution images of steel box girders (Zhang and colleagues, arXiv, 2024) and large images of steel structures (Sensors, 2021), whose authors note that visual inspection, the most common method, "highly relies on the subjective judgment of the inspectors". Searches in November 2026 found no published set of construction-machine boom images checked against magnetic particle testing.

arxiv.orgebi.ac.uk

Built with what exists

A mirrorless camera or phone with a ring light; Meta's Segment Anything Model 2 to speed up outlining; Ultralytics YOLO11 segmentation; magnetic particle testing done by a technician certified to ISO 9712 Level 2, on retired parts at a remanufacturer or salvage yard.

  1. First step

    Contact a remanufacturer or a yard that strips used excavators, and photograph five retired booms whose crack inspections it already records.

  2. Done looks like

    300 weld-toe areas from at least 30 retired booms or arms, photographed and then tested by magnetic particles. The model's detection rate for cracks longer than 5 mm and its false alarms per boom are published beside the same figures for two trained people looking at the same photos, with the images released.