Industries / Industrial equipment and services / Heavy equipment manufacturing
Hydraulics
Moving a machine's boom, bucket, hitch or crane by pushing oil under pressure through pumps, valves, hoses and cylinders.
5
Milestones achieved, from 1926 to 2023.
2
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1926
A hitch that holds depth
Harry Ferguson's British patent 253,566, filed on 12 February 1925 and published on 14 June 1926, linked a plow to a tractor through a connection that adjusts as the pull on the implement changes, keeping the plow's working depth steady. This idea is called draft control; draft is the pull of the soil on the implement. Ferguson's team then built the hitch into the tractor with a hydraulic lift and three links, two below and one on top, the three-point hitch still used on tractors. Production with David Brown began in 1936, and after a handshake agreement with Henry Ford the system went into the Ford 9N, launched on 29 June 1939 (Ferguson Club Journal, 1989).
Credit
Harry Ferguson, with Willie Sands and Archie Greer
1954
The modern excavator layout
Water-powered excavators were built from 1882 but failed, partly for lack of good seals. Excavators driven by oil appeared in the 1940s: Ray Ferwerda's design, bought by Warner & Swasey in 1946, became the Gradall; the Italian Bruneri brothers built a truck-mounted machine in 1948 and sold the rights to the French firm SICAM, maker of Yumbo, in 1954; and Poclain built its first true hydraulic excavator in 1951. In 1954 Demag's B504 combined crawler tracks with an upper body that turns a full 360 degrees, the pattern of today's excavators (Aggregates Business, 2012). Sources disagree on firsts: Liebherr says its L300, in series production from 1954 and four times lighter than the cable excavator Hans Liebherr had hired, was the first hydraulic excavator in Europe, while Aggregates Business dates the Bruneri and Poclain machines earlier.
LessonEarly hydraulic machines were unreliable, and sales of crawler excavators took off only in the 1960s, once better hydraulic seals were widely available (Aggregates Business).
Credit
the Bruneri brothers, Poclain, Demag and Liebherr
2008
Swing energy stored and reused
Komatsu began selling the PC200-8 Hybrid in Japan in June 2008. In this 22-ton excavator an electric motor turns the upper body instead of a hydraulic motor; as the swing slows, the motor works as a generator and stores the energy in a capacitor for the next move. ENR reported in March 2010 that more than 700 had sold in Asia in the 19 months since production began, and that Komatsu claimed 25% to 40% less fuel than the standard model.
LessonAt a 50% price premium, about $225,000 in the US, buyers paid only where fuel was costly and machines ran about 2,000 hours a year, as in China and Japan, Komatsu's US product manager told ENR.
Credit
Komatsu
2017
Leaking oil meets hot exhaust
The NSW Resources Regulator in Australia analyzed 203 fires on mobile machines at mines between September 2014 and May 2017. Hydraulic oil was involved in 33% of the fires; 57% of the failed parts were fittings, hoses, pipes, seals or similar; and hot exhaust and turbocharger surfaces started 69%. The regulator noted that dry exhausts run at 500 °C or more, while NIOSH tests found hydraulic oil can ignite on hot surfaces at 440 to 480 °C, and that design fixes after fires had re-routed and clamped lines without removing the heat source.
LessonMoving hoses away from hot parts was not enough: hydraulic oil was still the fuel in 22% of the 179 fires reported at New South Wales mines in 2024–25, and the regulator points instead to keeping surfaces cooler by design, for example with water-jacketed exhausts.
Credit
a failure; analysis by the NSW Resources Regulator
2023
A loader without hydraulics
Bobcat launched the T7X compact track loader around the ConExpo trade show in 2023. It runs on batteries and moves its lift arms and bucket with electric actuators, motor-driven screws, instead of hydraulic cylinders; Bobcat called it the world's first all-electric compact track loader. By April 2024 it was in production and Sunbelt Rentals had become its first customer, Construction Briefing reported. Because each actuator reports its position, the machine can level its bucket automatically.
LessonElectric actuators are bulkier than cylinders and limited in force, Bobcat's Joel Honeyman told Construction Briefing, which is why larger machines such as excavators still use hydraulic cylinders.
Credit
Bobcat
Watch for
Load sensing without a compensator
Load sensing is a hydraulic design in which the pump supplies only the pressure and flow the heaviest-loaded function needs, with a valve called a compensator at each function to keep flow steady as loads change. Bosch Rexroth engineers describe a version for a battery-electric compact track loader in which sensors control the pump instead of hydraulic feedback lines, and the boom's compensator is redesigned to stay put so oil can flow back and recover energy as the boom is lowered. On their proving ground, a 5-ton loader rated at 68 kW used 37% less power than the same machine with a conventional open-center system, in which oil circulates back to the tank whenever the valves are idle.
Achieved whena machine maker sells a loader with the system, or an outside lab repeats the energy measurement.
Claimed by
Shaoyang Qu, Zifan Liu, Rafael Cardoso and Enrique Busquets of Bosch Rexroth, in the International Journal of Fluid Power, July 2025
An excavator with no cylinders
The eXact project replaced the boom, stick and bucket cylinders of a Volvo ECR25 Electric compact excavator with ball-screw electric linear actuators, and its hydraulic swing with a direct electric drive, leaving the machine almost free of hydraulics. It reports 30% to 80% better efficiency for the arm, depending on the task, and 86.8% less energy per 10-minute swing cycle (254 Wh down to 33 Wh). Its own summary says future work will focus on durability and robustness.
Achieved whenthe machine passes durability tests in site conditions and an outside party measures its energy use, or a maker sells one.
Claimed by
students from ETH Zurich, OST and FHNW with SUNCAR AG, Volvo Construction Equipment and Ewellix, November 2025
Open
01
Phone reader for patch tests
A phone app with a clip-on microscope that photographs a patch test and estimates the oil's ISO 4406 cleanliness code, a three-number code, such as 12/10/07, for the number of particles in three size bands. In a patch test, a technician pulls a measured volume of hydraulic oil through a fine filter membrane and judges the dirt left on it. Dirty oil wears pumps and valves, and many machine owners run this test in the field instead of sending oil to a lab.
The briefCredit · unclaimed02
A shared dig-cycle benchmark
A public benchmark for excavator hydraulics: recorded pressures, flows, cylinder positions and input power from a standard digging cycle on a full-size excavator, open simulation models tuned to match the recording, and a script that scores how much energy any hydraulic design would use on that same cycle.
The briefCredit · unclaimed
Open 01 · the brief
Phone reader for patch tests
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A phone app with a clip-on microscope that photographs a patch test and estimates the oil's ISO 4406 cleanliness code, a three-number code, such as 12/10/07, for the number of particles in three size bands. In a patch test, a technician pulls a measured volume of hydraulic oil through a fine filter membrane and judges the dirt left on it. Dirty oil wears pumps and valves, and many machine owners run this test in the field instead of sending oil to a lab.
Why it is still open
Kits come with printed comparison images. A reference chart for Pall's patch test kit, published by the distributor PETRO, shows membranes at 100x magnification for 100 mL of fluid and says exact particle counts cannot be read from it, only estimates by trained technicians. Automated readers exist as laboratory instruments: the PAMAS FastPatch 2 GO, a motorized microscope with image analysis software, counts and sizes the particles on a membrane under ISO 4407, the standard for counting particles on a filter by microscope, and reports an ISO 4406 code. Castrol holds a US patent (10,935,538, granted 2021) for counting particles on a filter with a phone and a USB microscope, but the patent reports one gear-oil example and no comparison with laboratory counts. Searches in November 2026 found no phone-based reader with a published accuracy test against laboratory particle counters.
Built with what exists
An Android phone; a clip-on or USB microscope; a membrane patch test kit; OpenCV and scikit-image to count particles; an Ultralytics YOLO11 model to tell particles from fibers; a commercial oil lab with an automatic particle counter for reference counts.
First step
Buy a patch test kit and a clip-on microscope, make membranes from clean oil mixed with measured amounts of standard test dust, and check that the app's counts rise in step with the dust added.
Done looks like
200 used-oil samples from at least 20 machines, each read by the app and counted by a lab. The share of samples where the app's code is within one step of the lab's in each of the three size bands is published beside the same share for trained technicians using a printed chart, with the images and code released.
Open 02 · the brief
A shared dig-cycle benchmark
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public benchmark for excavator hydraulics: recorded pressures, flows, cylinder positions and input power from a standard digging cycle on a full-size excavator, open simulation models tuned to match the recording, and a script that scores how much energy any hydraulic design would use on that same cycle.
Why it is still open
Each energy claim above is measured against its maker's own baseline and cycle: Komatsu's 25% to 40% fuel saving against its standard PC200, Bosch Rexroth's 37% against an open-center version of its own loader, and eXact's 30% to 80% arm saving against the Volvo ECR25's hydraulics. A shared test procedure does exist: the Japan Construction Machinery and Construction Association's standard JCMAS H 020, "Test methods for energy consumption" of hydraulic excavators, which since its 2010 edition also covers electric and hybrid machines. It sets how to run and score a test; it publishes no recorded data. Open models exist: the OpenHydraulics library for OpenModelica includes an excavator dig-cycle example, and MathWorks publishes an excavator model in Simscape that simulates dig cycles. Searches of the web and Zenodo in November 2026 found no public measured dig-cycle data to check them against.
jcmanet.or.jpbuild.openmodelica.orggithub.comenr.comjournals.riverpublishers.comsuncar-ag.com
Built with what exists
OpenModelica with the OpenHydraulics library; MATLAB Simscape and the Excavator-Simscape model; pressure transducers, flow meters and cable position sensors on a CAN bus data logger; Python for the scoring script.
First step
Run the OpenHydraulics and Simscape excavator models on the same scripted dig cycle and publish how far apart their energy results are.
Done looks like
At least 10 recorded cycles from one full-size excavator, recorded by a university lab or maker partner whose qualified operator runs the machine, published under an open license. The tuned model matches the measured pump energy within 10% over the cycle, and at least three designs (open-center, load sensing and electric actuators) are scored on it.