BRENNEN

Industries / Mining and materials / Steel and metals

Forging

Forging shapes metal, usually heated until it is soft but still solid, by hammering or pressing it, to make parts that carry heavy loads, such as crankshafts, gears, landing gear, turbine disks and the rings of reactor vessels.

c. 3200 BCE

Smiths in Egypt hammered meteoritic iron (iron that fell to Earth in meteorites) into thin sheets and rolled them into tubes to make nine small beads, buried at Gerzeh and the earliest known iron objects. Thilo Rehren and colleagues, who identified the metal in 2013, conclude that metalworkers had mastered the smithing of meteoritic iron nearly two thousand years before iron was smelted from ore.

doi.org

30

Milestones achieved across 6 domains.

8

To watch for: announced, not yet confirmed outside.

13

Open deliverables. Nobody has shipped them.

In one minute

Where it started

Smiths shaped iron by hammering long before anyone could smelt it, and for most of history a forging could be no bigger than a smith's hammer, or one driven by a water wheel, could work. Steam hammers from 1841, drop hammers in Samuel Colt's revolver factory from the 1850s and hydraulic presses from the 1860s turned forging into an industry. After the Second World War the US Air Force paid for 50,000-ton presses to forge large aircraft parts.

Where it stands

Germany's forging association counts about 230 forging companies in Germany, which made just under 1.7 million tonnes of forged parts worth €7.2 billion in 2023 by the Federal Statistical Office's figures; it calls Germany Europe's largest producer and the world's third, and names vehicle and machine building as the main customers. India's forging association says India is the second-largest producer, making 2.9 million tonnes a year and employing more than 300,000 people. Presses now reach 800 MN (meganewtons, about 80,000 tonnes), at Deyang in China. Computer simulation of metal flow became routine in large forges in the 2000s, and since 2016 cases at France's Le Creusot forge and on an Air France A380 engine have made a forging's records and hidden internal structure as much a concern as its shape.

What is open

Much of what a forge knows stays inside it: the log of every stroke, how its dies wore, its energy per tonne, its hardness tests and its photos of rejected parts. Shared data sets, public tests and cold physical models made of plasticine would let outsiders check claims now made for robots, AI inspection and hydrogen or electric furnaces. Open-weight AI models, low-cost robot arms that learn from a few demonstrations, and handheld 3D scanners put most of these jobs within reach of a small team that never goes near hot metal.

Domains

AchievedWatch forOpen

Advances to build with

3 research notes

Open in forging

3 of 13 open deliverables

Open · Heating

Forge energy, plant by plant

A public table of energy used per tonne by forging plants, split where records allow into heating, forging and heat treatment, assembled from records that are already public: the US Industrial Training and Assessment Centers (ITAC) audits of plants, the anonymized plant figures in the EU's 2024 BREF, and the energy and output figures forging companies print in annual and sustainability reports.

Built with what exists

The ITAC assessment records filtered to forging (NAICS code 332111 for iron and steel forging, and the code for nonferrous forging); the BREF's charts, digitized with WebPlotDigitizer; Python and pandas; an AI document reader to pull energy and tonnage lines out of company reports, every figure checked by hand (the Note "Seven more flagged" covers an AI reviewer of long documents); for forges that share meter data privately, an open-weight model run on their own computers so the data never leave the plant (see the Note "A trillion open parameters").

Credit · unclaimed

Open · Open-die forging

Stroke logs from a camera

A program that watches ordinary video of an open-die press at work and writes a log of every stroke (when it fell and where along the workpiece it landed) and of every turn or feed by the manipulator, released with a set of hand-annotated videos to test it on.

Built with what exists

Public videos of open-die forging posted by forges and press makers, used with their permission; Meta's SAM 2 model to follow the glowing workpiece from frame to frame; a vision-language model reading sampled frames to label strokes and turns; Label Studio for the hand annotations.

Credit · unclaimed

Open · Closed-die forging

Teach a transfer by demonstration

A cold mock-up of a closed-die forging cell, with three die nests printed in plastic and room-temperature steel blanks of five shapes, and a robot arm that learns to carry each part from nest to nest, turning it as a real transfer must, from a few human demonstrations instead of a hand-written program.

Built with what exists

Hugging Face's LeRobot software to record demonstrations and train policies; an arm it supports, such as the low-cost SO-101, or a collaborative robot such as a Universal Robots UR5e; Runway's Praxis-1, whose weights are open under the Apache 2.0 license (see the Note "Open robot model weights"); NVIDIA's GR00T 2 once it can be downloaded (see the Note "Five demonstrations per task"); a 3D printer for the nests and a 2 mm go/no-go gauge.

Credit · unclaimed

Where it sits