BRENNEN

Industries / Mining and materials / Steel and metals / Forging

Closed-die forging

Closed-die forging, also called impression-die or drop forging, presses or hammers hot metal into cavities cut in a pair of dies so that it takes the shape of the part, with the surplus squeezed out between the dies as a thin fin called flash.

6

Milestones achieved, from 1853 to 2018.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1853

    Drop hammers for revolvers

    A drop hammer lifts a weight carrying one half of a die and lets it fall onto hot metal resting in the other half. Elisha K. Root of Hartford, Connecticut, patented a drop hammer on 16 August 1853 (US patent 9,941) in which a turning screw lifted the hammers and a catch held each at the top until the operator released it, with a striking face "of any form desired." Samuel Colt hired Root in 1849 to supervise his new Hartford factory, where Root designed drop hammers, gauges and fixtures that, by ConnecticutHistory.org's account, made the Colt revolver the first handgun with fully interchangeable parts.

    patents.google.comconnecticuthistory.org

    Credit

    Elisha K. Root, Colt's armory

  2. 1955

    Presses of 50,000 tons

    After the Second World War, Allied teams found that Germany had made large aircraft parts on die-forging presses of up to 30,000 metric tons. The US Air Force's Heavy Press Program paid for larger ones, to forge parts big enough to form key aircraft structural elements, which ASME says would cut fabrication time and cost: a 50,000-ton press built by Mesta Machine Company began work at Alcoa in Cleveland on 5 May 1955, and a second, built by the Loewy Construction Company, started at Wyman-Gordon in Grafton, Massachusetts, in October 1955. ASME's 1981 landmark brochure calls the Mesta press, 87 feet (26.5 m) tall and about 8,000 tons, the country's largest forging machine, and ETHW credits the Wyman-Gordon press with a part in developing the Boeing 747. The 50,000 tons are US short tons, about 445 MN by conversion.

    asme.orgethw.org

    Credit

    US Air Force Heavy Press Program; Mesta Machine Company; Loewy Construction Company; Alcoa; Wyman-Gordon

  3. 1970

    Hot dies for superalloys

    Nickel superalloys for jet engine disks are made to stay strong when hot, which also makes them hard to forge. Joseph B. Moore and Roy L. Athey of United Aircraft Corporation patented a process (filed December 1967, granted July 1970, US patent 3,519,503) in which the alloy is first compressed to a very fine grain that makes it temporarily ductile, then "forged in hot dies" heated to the forging temperature in an inert atmosphere. Forging with dies as hot as the part is now called isothermal forging; ATI says its plant at Cudahy, Wisconsin, runs three isothermal presses, including one rated at 12,500 tons, for jet engine forgings.

    patents.google.comatimaterials.com

    Credit

    Joseph B. Moore and Roy L. Athey, United Aircraft Corporation (now part of RTX)

  4. 2012

    A cracked giant rebuilt

    In August 2008 cracks were found in the base castings of Alcoa's 50,000-ton press in Cleveland, and Alcoa stopped it. Meanwhile its 35,000-ton press made large forgings such as aluminum bulkheads for the F-35 Joint Strike Fighter. Alcoa took the 50,000-ton press apart and redesigned it for $100 million, calling it one of only five heavy closed-die forging presses in the United States, and restarted it in February 2012, saying the plant could now double its capacity.

    LessonA machine with few equals in a country cannot be replaced quickly; this one was out of service for three and a half years.

    howmet.comhowmet.com

    Credit

    Alcoa

  5. 2013

    An 80,000-tonne press

    In April 2013 China National Erzhong Group completed an 800 MN closed-die hydraulic press at Deyang, "larger than any other previously built," with 30 high-pressure cylinders, as Shell Lubricants, which supplied its hydraulic oil, reported. A 2026 China Daily profile gives its rating as 80,000 metric tons, its height as 42 meters and its weight as 22,000 tons, says it was ready by 2012, and lists parts it has forged for the C919 airliner, among them the vertical stabilizer and main landing gear; it calls the press "one of the largest in the world."

    engineeringnews.co.zamobile.chinadaily.com.cn

    Credit

    China National Erzhong Group, Deyang Wanhang Die Forging

  6. 2018

    A press with 3,000 sensors

    Weber Metals in Paramount, California, part of the German Otto Fuchs group, ordered a new closed-die press in 2013, and Otto Fuchs dates its completion to 2018. Its builder, SMS group, rates it at 540 MN, which it equates to 60,000 short tons, and says it carries more than 3,000 sensors and a hydraulic system holding 270,000 liters of oil; Otto Fuchs calls it the 54,000-ton press, and Weber calls it the largest closed-die press in the Western Hemisphere.

    sms-group.comotto-fuchs.comwebermetals.com

    Credit

    Otto Fuchs and Weber Metals; SMS group

Watch for

  1. Isothermal forging in a vacuum

    SMS group is supplying the Institute of Forming Technology and Machines (IFUM) at Leibniz University Hannover with a mobile vacuum module for isothermal forging, fitted to an existing 6,000 kN screw press. A batch of up to ten blanks of titanium or nickel superalloy is pumped down to about 0.012 mbar, die and workpiece are heated to around 1,100 °C, and a robot working inside the vacuum moves each hot blank from the furnace into the die and out to an extraction chamber. IFUM says it will use the module to develop new superalloys.

    Achieved whenIFUM publishes forgings made in the module, with measured temperatures and microstructures.

    machinery-market.co.uk

    Claimed by

    SMS group and IFUM, January 2026, with operation due by the end of 2026

Open

  1. 01

    Teach a transfer by demonstration

    A cold mock-up of a closed-die forging cell, with three die nests printed in plastic and room-temperature steel blanks of five shapes, and a robot arm that learns to carry each part from nest to nest, turning it as a real transfer must, from a few human demonstrations instead of a hand-written program.

    The brief
    Credit · unclaimed
  2. 02

    Flow lines in colored plasticine

    A public atlas of closed-die forgings modeled in layered, colored plasticine pressed at room temperature into 3D-printed dies, then cut in half and photographed to show how the material fills each cavity and escapes as flash. Each entry carries the die files, the press load against travel, and the photos.

    The brief
    Credit · unclaimed

Open 01 · the brief

Teach a transfer by demonstration

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A cold mock-up of a closed-die forging cell, with three die nests printed in plastic and room-temperature steel blanks of five shapes, and a robot arm that learns to carry each part from nest to nest, turning it as a real transfer must, from a few human demonstrations instead of a hand-written program.

Why it is still open

Robots have worked at forging presses since at least 1979, when W. B. Heginbotham, A. K. Sengupta and E. Appleton reported on an ASEA robot used as an open-die forging manipulator. Crossref searches in November 2026 found papers on robot handling at forges and on learning pick-and-place from one or a few demonstrations, but none that tested demonstration learning on forging transfers. NVIDIA reports that its GR00T 2 model reaches 95% success after five demonstrations on 50 tasks of its own choosing, a figure not checked outside NVIDIA, from a model that was not yet downloadable on 13 November 2026 by the Note's account. 65358-8)

doi.orgresearch.nvidia.com

Built with what exists

Hugging Face's LeRobot software to record demonstrations and train policies; an arm it supports, such as the low-cost SO-101, or a collaborative robot such as a Universal Robots UR5e; Runway's Praxis-1, whose weights are open under the Apache 2.0 license (see the Note "Open robot model weights"); NVIDIA's GR00T 2 once it can be downloaded (see the Note "Five demonstrations per task"); a 3D printer for the nests and a 2 mm go/no-go gauge.

  1. First step

    Print three nests for one part shape, record five demonstrations with LeRobot, and film the first 20 attempts.

  2. Done looks like

    For each of five part shapes, a policy trained on five demonstrations makes 20 filmed attempts, and the tally of complete three-nest transfers is published; a transfer counts only if the part sits in each nest within the gauge.

Open 02 · the brief

Flow lines in colored plasticine

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public atlas of closed-die forgings modeled in layered, colored plasticine pressed at room temperature into 3D-printed dies, then cut in half and photographed to show how the material fills each cavity and escapes as flash. Each entry carries the die files, the press load against travel, and the photos.

Why it is still open

Plasticine has long stood in for hot metal in forging research; Wójcik, Lis and Pater measured its flow curves in 2016 for that use, and a 2013 study by Christiansen and colleagues tested small lead models of open-die forging against a computer model. Searches of Crossref, GitHub and Hugging Face in November 2026 found no public collection of sectioned plasticine models, with die files and loads, against which anyone could test a forging simulation.

doi.orgdoi.org

Built with what exists

A resin or filament 3D printer for the dies; plasticine in three or four colors; a universal testing machine with a load cell, run by laboratory staff; a fine wire to cut sections; a phone camera on a copy stand over a millimeter grid.

  1. First step

    Print a two-piece die for a simple flanged hub and press three layered billets.

  2. Done looks like

    Ten part shapes, each pressed three times, with sections photographed on a grid, load-travel curves and STL die files released under an open license, and the spread in flash width between repeats reported.