BRENNEN

Industries / Mining and materials / Steel and metals / Forging

Heating

Heating brings a billet (a cut length of bar) or an ingot (a large cast block) up to forging temperature, about 1,200 °C for steel, in a fuel-fired furnace or inside an electric induction coil.

4

Milestones achieved, from c. 1350 BCE to 2024.

2

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. c. 1350 BCE

    Meteorite iron forged cool

    The iron dagger buried with Tutankhamun, who reigned from 1361 to 1352 BCE, was hammered from a meteorite. In 2022 Takafumi Matsui of the Chiba Institute of Technology and colleagues mapped the blade at the Egyptian Museum in Cairo without damaging it, and found remains of a Widmanstätten pattern, a crosshatch of nickel-rich bands that forms only in meteorite iron, along with sulfide grains. They concluded that the smith shaped it by "low-temperature (<950 °C) forging", hot enough to work the metal but not hot enough to erase those features. Albert Jambon replied in the same journal that the team's scanning steps of 0.9 mm were too coarse to resolve a 1 mm pattern, so the reading is disputed.

    doi.orgdoi.org

    Credit

    an unknown smith; analysis by Takafumi Matsui, Ryota Moriwaki, Eissa Zidan and Tomoko Arai

  2. 1941

    Billets fed through a coil

    In induction heating, a coil carrying high-frequency current sets up heating currents inside the metal itself, so the heat starts in the billet, not in a furnace around it. Harold A. Strickland Jr. of the Budd Wheel Company filed a patent in September 1941, granted in 1943, for a heater that fed bars or billets "continuously and automatically" through induction coils for forging, aimed at "mass production" and built to cut its own power to prevent overheating. His design filed in 1947 with Donald W. Riddell, assigned to the Ohio Crankshaft Company, timed each billet's heating and pushed it out by itself. German industry figures quoted by the European Commission in 2024 put induction at 400 to 500 kWh of electricity to bring a tonne of steel to 1,200 °C, against 1,200 to 2,500 kWh for gas-fired furnaces; induction suits round and square stock of small to medium section, and large workpieces still go into fuel-fired furnaces.

    patents.google.compatents.google.combureau-industrial-transformation.jrc.ec.europa.eu

    Credit

    Harold A. Strickland Jr. (Budd Wheel Company); Donald W. Riddell (The Ohio Crankshaft Company)

  3. 2022

    Gas prices squeeze forges

    On 1 April 2022 Germany's forging association, the Industrieverband Massivumformung (IMU), and three other metal-forming associations sent an emergency letter to two federal ministers, Christian Lindner and Robert Habeck: unit prices for electricity were six times, and for gas four times, what they had been at the start of 2021. "The situation does not allow for waiting," said IMU's managing director, Tobias Hain. In November 2022 the ifo Institute, an economic research institute in Munich, reported that 35% of German companies in metal production and processing had cut output to use less gas.

    LessonHeating is the largest single use of energy in a hot forge, about a third by German industry figures, so a forge tied to one fuel carries that fuel's price swings.

    umformtechnik.netifo.de

    Credit

    IMU and Tobias Hain; the ifo Institute survey

  4. 2024

    Europe's rulebook reaches forges

    The EU's 2005 reference document on best available techniques (a BREF, the basis for permits at large plants) for smitheries and foundries left forges out, because no European forge reported meeting its thresholds: hammers above 50 kJ in a plant using more than 20 MW of heat. The revised BREF, with conclusions published in November 2024, covers forges, drawing on questionnaires from 9 of them. It quotes German industry figures that heating takes about 33% of a hot forge's energy and heat treatment 26%. Operators treated their energy data as confidential, so the document prints them under anonymous codes, and its energy performance levels cover foundries only.

    bureau-industrial-transformation.jrc.ec.europa.eueippcb.jrc.ec.europa.eu

    Credit

    the European Commission's Joint Research Centre, with EUROFORGE and the EU technical working group

Watch for

  1. Hydrogen in the reheating furnace

    Swiss Steel Group says that in the EU-funded HYDREAMS project, running since April 2023, a 2 MW furnace for blooms and forged billets at its Krefeld plant in Germany has run since March 2025 on six burners converted to hydrogen and air, and that laboratory tests on 13 steel grades have found no structural differences or changes in composition so far. Laurent Sieye of its subsidiary Ugitech says replacing natural gas with hydrogen is "not yet fully developed", naming emissions of NOx (nitrogen oxides, an air pollutant), effects on steel quality and shorter refractory life. Two more demonstrators are due at Ugine, France, in 2026.

    Achieved whensomeone outside the project publishes fuel use, NOx, scale loss and refractory wear from months of hydrogen firing, compared with natural gas in the same furnace.

    bayern-innovativ.de

    Claimed by

    Swiss Steel Group, August 2025

  2. An electric furnace for ingots

    Swiss Steel Group says its Finkl Steel-Sorel plant in Québec converted a 1.4 MW gas-fired forge furnace, which heats ingots of up to 40 tons, to 36 electric tubular heating elements rated to 1,600 °C, and handed it to production in December 2025. It calls this the first installation of its kind worldwide and says the switch can cut greenhouse gas emissions by up to 3,000 tons a year on the plant's hydroelectric power; its gains in heat loss and scale so far come from modeling.

    Achieved whena year of measured energy use, heating times and scale loss on forged ingots is published and checked by someone outside the company.

    swisssteel-group.com

    Claimed by

    Swiss Steel Group, March 2026

Open

  1. 01

    Forge energy, plant by plant

    A public table of energy used per tonne by forging plants, split where records allow into heating, forging and heat treatment, assembled from records that are already public: the US Industrial Training and Assessment Centers (ITAC) audits of plants, the anonymized plant figures in the EU's 2024 BREF, and the energy and output figures forging companies print in annual and sustainability reports.

    The brief
    Credit · unclaimed
  2. 02

    Hydrogen scale, pooled

    An open model that predicts how much more steel turns to scale, the oxide crust that flakes off and is lost, when billets are reheated in a hydrogen flame instead of a natural gas flame, fitted to every published measurement and tested on a study it has not seen. Burning hydrogen puts more water vapor into the furnace atmosphere, which is why scale changes.

    The brief
    Credit · unclaimed

Open 01 · the brief

Forge energy, plant by plant

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public table of energy used per tonne by forging plants, split where records allow into heating, forging and heat treatment, assembled from records that are already public: the US Industrial Training and Assessment Centers (ITAC) audits of plants, the anonymized plant figures in the EU's 2024 BREF, and the energy and output figures forging companies print in annual and sustainability reports.

Why it is still open

The EU's 2024 BREF printed its 9 forges' energy figures under anonymous codes because operators treated them as confidential, and it set energy levels for foundries only. ITAC records do cover forges one at a time: assessment WV0556 (2018) describes an Ohio iron and steel forge making 14,000 tons a year that used 4,312,800 kWh of electricity and 13,668 MMBtu of natural gas. Searches of Zenodo, Hugging Face and the web in November 2026 found no table that sets forging plants side by side.

bureau-industrial-transformation.jrc.ec.europa.euitac.university

Built with what exists

The ITAC assessment records filtered to forging (NAICS code 332111 for iron and steel forging, and the code for nonferrous forging); the BREF's charts, digitized with WebPlotDigitizer; Python and pandas; an AI document reader to pull energy and tonnage lines out of company reports, every figure checked by hand (the Note "Seven more flagged" covers an AI reviewer of long documents); for forges that share meter data privately, an open-weight model run on their own computers so the data never leave the plant (see the Note "A trillion open parameters").

  1. First step

    List every ITAC assessment of a forge, starting with NAICS 332111, and compute energy per ton of output for each.

  2. Done looks like

    At least 100 forging plant-years from at least three countries, each with energy per tonne of output and a link to its source, and a published spread (median and range) of heating energy per tonne by heating method, set beside the 400 to 500 kWh and 1,200 to 2,500 kWh per tonne that the BREF quotes for induction and gas.

Open 02 · the brief

Hydrogen scale, pooled

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An open model that predicts how much more steel turns to scale, the oxide crust that flakes off and is lost, when billets are reheated in a hydrogen flame instead of a natural gas flame, fitted to every published measurement and tested on a study it has not seen. Burning hydrogen puts more water vapor into the furnace atmosphere, which is why scale changes.

Why it is still open

Each study measures its own steels and conditions. Juho Haapakangas and colleagues (2024) found that scale on four low-carbon steels grew with the water vapor in the furnace gas, a hydrogen-air atmosphere among them, by amounts that differed between grades. Claudia Radünz and colleagues (2025) heated three steels for 180 minutes at 1,100, 1,200 and 1,280 °C in a semi-industrial furnace and found that switching to hydrogen increased scale by an amount that depended on the steel. HYDREAMS reports laboratory tests on 13 grades, and GF-ELTI and the forger FOMAS reported, from 100% hydrogen heat treatments of forged parts, only a small difference in the thin oxide layer. Searches in November 2026 found no pooled public model, so a forge planning a fuel switch must estimate its extra metal loss from one study at a time.

doi.orgdoi.orgexpometals.net

Built with what exists

Published mass-gain tables and charts, digitized with WebPlotDigitizer; raw data requested from authors; Python with SciPy and scikit-learn to fit rate laws in temperature, time and water vapor content; an AI model to find and tabulate the studies, every value checked against the paper.

  1. First step

    Tabulate the mass-gain results in Radünz et al. (2025), and ask the HYDREAMS partners whether their 13-grade laboratory results can be released.

  2. Done looks like

    Data from at least five published studies, at least three with hydrogen firing, in one open file; for each study left out in turn, the model predicts its measured mass gain within 20%, with every study's error published.