Industries / Energy, water and waste / Pipelines and midstream
Compression services
Compression services is the business of supplying, renting out and running the compressors that push natural gas out of wells, through gathering lines and into processing plants and pipelines.
1954
South Coast Gas Company was formed; it is the earliest of the companies that became Universal Compression and later Archrock, which says its history goes back "as far back as outsourced natural gas compression itself.".
28
Milestones achieved across 5 domains.
6
To watch for: announced, not yet confirmed outside.
7
Open deliverables. Nobody has shipped them.
In one minute
Where it started
Gas leaves a well at falling pressure, and a compressor squeezes it so it can move along a pipe. For decades producers and pipelines owned their own machines. From the 1950s a few firms rented compressors out, and in the 1990s renting became the usual choice: Hanover Compressor grew from 47 units in 1990 to 1,653 units in 1997.
Where it stands
A handful of US firms, Archrock, Kodiak Gas Services and USA Compression Partners, each run about 4 to 4.5 million horsepower, by their own filings. Most of it is large piston compressors driven by Caterpillar gas engines and parked at gathering stations. Electric motors were the growth story until 2025. In 2026 Kodiak said grid connections in some areas take "outside of a decade to maybe never." Methane rules tightened in 2024, and in 2025 the United States repealed its methane fee and delayed its rules.
What is open
The industry's data is scattered and mostly private. No public labelled set of gas compressor fault signals was found, nor any single table of fleet sizes from 30 years of filings, nor an open estimate of how much methane the industry's engines let through unburned. Each of these is a desk job for a small team, using public filings, simulation and AI models that read documents.
Domains
AchievedWatch forOpen
Domain
Progress
Last achieved
Watch for
Open
Compression at the well
Small compressors at or near a well lower the pressure the well pushes against, so a tired well keeps flowing. Others inject gas down oil wells to lift the oil (gas lift).
5 · 0 · 1
Last achievedThe small-unit specialist is absorbed2024
1
openRenting out compression
Contract compression firms own fleets of compressor packages, set them at customers' gathering and booster stations, and run and repair them for a monthly fee.
6 · 1 · 1
Last achievedBig units at central stations2026
Watch forCompression firms selling power
1
openEngines and motors
A compressor needs a driver. In the field it is usually a natural gas engine burning some of the gas it moves, and sometimes an electric motor.
5 · 1 · 1
Last achievedA bet on electric drive2024
Watch forA turn back to gas engines
1
openMonitoring and maintenance
Field compressors run unattended. Sensors, analyzers and mechanics keep them running, and contracts pay for the hours they run.
6 · 3 · 2
Last achievedPaid for hours running2026
Watch forA chat assistant for field mechanics
2
openEmissions
Field compressors leak methane from the seals around piston rods, burn some gas incompletely in their engines, and emit nitrogen oxides. Rules and measurements of these have changed fast.
6 · 1 · 2
Last achievedUS rules undone2025
Watch forCapturing packing and blowdown gas
2
open
Open in compression services
3 of 7 open deliverables
Open · Compression at the well
Size a compressor for a tired well
A free, open-source screening tool that takes a gas well's public production history and pressure, estimates how much more gas it would make if a compressor lowered its wellhead pressure, and estimates the horsepower needed. It would use the published Turner and Coleman formulas for the gas rate below which a well fills with liquid and stops flowing.
Built with what exists
Python; public well production data from a state such as Pennsylvania or Texas; the Turner and Coleman equations from the open literature; a coding agent to write and test the code (see the Note "Code no person read").
Open · Renting out compression
Thirty years of fleet numbers
One public table of fleet horsepower, unit counts and fleet use (utilization, the share of the fleet earning rent) for every listed contract compression firm, each year from 1997 to 2026, with each number linked to the filing it came from.
Built with what exists
SEC EDGAR's free full-text search and download service; an AI model that reads long documents and pulls out figures (see the Note "Seven more flagged"); Python.
Open · Engines and motors
Engine or motor, with the wait
An open cost model for one compressor site that compares a gas engine with an electric motor over 15 years, counting fuel gas burned, power price, equipment lead time, the wait for a grid connection and the cost of emissions.
Built with what exists
Python or a spreadsheet; US Energy Information Administration gas and industrial power prices; engine fuel rates from published Caterpillar data sheets; grid wait times from utility interconnection queue reports.