Industries / Energy, water and waste / Pipelines and midstream
Pumps and compressors
Pumps push liquids and compressors push gas along a line; stations every so often restore the pressure lost to friction.
5
Milestones achieved, from 1903 to 2021.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
In depth
The same ground is charted in more depth, as an industry of its own.
The road
AchievedWatch forOpen
Achieved
1903
Gas engines drive compressors
The first natural gas compressor station was built in 1890 in the Murrysville field east of Pittsburgh, according to compression historian Norm Shade. By fall 1903 the Hastings station in West Virginia had two 4,500 horsepower Snow horizontal gas engine-compressors, which he calls the largest then used to pump gas. They ran until 1945.
Credit
Snow (engine builder); Hope (owner of Hastings from 1906)
1974
An aircraft engine compresses gas
In November 1974 a compressor driven by an industrial version of the Rolls-Royce RB-211 jet engine went into service at TransCanada's Burstall, Saskatchewan, station. A 1977 trade article calls it the first natural gas pipeline compressor powered by that engine, and reports field tests of 26,400 shaft horsepower at 33.8% thermal efficiency.
Credit
TransCanada PipeLines; Rolls-Royce
1979
An additive adds capacity
A pump program completed in 1979, together with a drag-reducing additive from Conoco, let the Trans-Alaska Pipeline carry 1.52 million barrels a day, the best rate for the Prudhoe Bay field, according to a 1980 Oil & Gas Journal report. A drag-reducing additive is a chemical that lowers friction in the pipe, so the same pumps move more oil. The report calls the additive expensive and says any further expansion would come from more pumps.
Lessonan additive buys capacity fast but is a running cost.
Credit
Conoco; Alyeska Pipeline Service Company
2007
Motor and compressor combined
GE introduced its Integrated Compressor Line in 2007: an electric motor and compressor in one casing, with no gearbox, lubricating oil system, shaft seals or external cooling. By January 2013 GE counted 16 units running in Europe for gas storage and pipelines. Its claim of at least 60% lower carbon dioxide emissions is its own.
Credit
GE Oil & Gas
2021
Gas-driven stations keep running
In the February 2021 freeze in Texas and the south-central US, gas pipelines were largely unaffected by power outages, a FERC and NERC staff report found, because most compressor stations run on gas and major sites had backup generators or batteries. Of 128 reported events affecting compressor stations, about 16% reduced flow, and only four were caused by power outages.
Lessona station that burns the gas it moves does not depend on the power grid.
Credit
staff of the Federal Energy Regulatory Commission (FERC) and the North American Electric Reliability Corporation (NERC)
Watch for
Compressors for pure hydrogen
Siemens Energy says it built a closed-loop test facility able to run on 100% hydrogen and tested a one-piece centrifugal compressor rotor for high pressure ratios, with "significant mechanical and aerodynamic promise." No figures were given.
Achieved whentest results are published and a pipeline or storage operator runs such a machine in service, with an outside report.
Claimed by
Siemens Energy (Kirk Lupkes), September 2025
Open
01
Rebuild the station counts
One clean public table of US interstate compressor stations and compressor units for reporting years 2021 onward, built from the individual FERC Form 2 filings that large interstate gas companies submit each year.
The briefCredit · unclaimed02
Name the machines
For each station, the type of each compressor (reciprocating, meaning piston, or centrifugal) and what drives it (gas engine, gas turbine or electric motor), with a source document linked to every row.
The briefCredit · unclaimed
Open 01 · the brief
Rebuild the station counts
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
One clean public table of US interstate compressor stations and compressor units for reporting years 2021 onward, built from the individual FERC Form 2 filings that large interstate gas companies submit each year.
Why it is still open
The US Environmental Protection Agency (EPA) says FERC stopped publishing compiled annual Form 2 datasets from reporting year 2021, leaving one report per company. Catalyst Cooperative's open PUDL database, which cleans other FERC forms, does not list Form 2 among its available data.
Built with what exists
FERC's machine-readable filings; Python; Catalyst's PUDL code as a model; a coding agent to write and test the parsers (Note: "Code no person read").
First step
Parse one 2021 company filing and match its station fields to the 2020 compiled dataset.
Done looks like
For 2020, the last year FERC compiled, the new method's station and unit counts match FERC's within 2%; the 2021 to 2025 table and code published so EPA or Catalyst can rerun them.
Open 02 · the brief
Name the machines
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
For each station, the type of each compressor (reciprocating, meaning piston, or centrifugal) and what drives it (gas engine, gas turbine or electric motor), with a source document linked to every row.
Why it is still open
EPA says compressor type is not available from FERC Form 2, from the commercial Enverus data, or from the federal HIFLD station map. Drive type also decides which stations depend on the power grid, which the 2021 freeze showed matters.
Built with what exists
State air permits, which list a site's engines and turbines; FERC certificate filings; AI models that read long documents (Note: "Seven more flagged"); HIFLD station locations.
First step
Pick one state that posts air permits online and code its interstate stations.
Done looks like
300 stations coded with compressor and drive type, each with a document link; a second person checks 50 rows and agrees on at least 95%.