Industries / Energy, water and waste / Pipelines and midstream / Compression services
Compression at the well
Small compressors at or near a well lower the pressure the well pushes against, so a tired well keeps flowing. Others inject gas down oil wells to lift the oil (gas lift).
5
Milestones achieved, from 1958 to 2024.
0
To watch for: announced, not yet confirmed outside.
1
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1958
Engine and compressor share a crankshaft
Ajax Iron Works of Corry, Pennsylvania, brought out a line of compressors built onto the gas engine that drives them, sharing one crankshaft, from 30 to 360 horsepower. Its first model, the DPC230, was designed for field gas gathering. Cooper-Bessemer bought Ajax in 1963.
Credit
Ajax Iron Works
2006
Capturing gas from storage tanks
A vapor recovery unit is a small compressor that collects gas boiling off oil tanks and sends it to sale instead of the air. The US Environmental Protection Agency's (EPA) Natural Gas STAR program reported recovery of over 95% of these vapors and a payback in as little as two months, from partner companies' experience.
Credit
EPA Natural Gas STAR and its partner companies
2007
Renting small units by the thousand
Compressco rented out its 46 horsepower GasJack unit for mature, low-pressure wells. Its fleet grew from 761 units at the end of 2002 to 2,763 at the end of 2007, according to its US securities filing. TETRA Technologies had bought it in July 2004 for about $94 million.
Credit
Compressco; TETRA Technologies
2016
Gas lift comes to Permian shale
Permian operators including Concho, Devon and Occidental were moving from electric downhole pumps to gas lift, which "had been little used there," the Journal of Petroleum Technology reported. Gas lift needs a compressor at the surface to inject gas under pressure. "Thirty years ago there was no gas lift in the Permian at all," said Libby Einhorn of Concho.
Credit
Concho Resources, Devon Energy, Occidental
2024
The small-unit specialist is absorbed
Kodiak Gas Services completed its purchase of CSI Compressco, the successor to Compressco, on 1 April 2024. The combined fleet was about 4.3 million horsepower, by Kodiak's count.
Credit
Kodiak Gas Services
Open
01
Size a compressor for a tired well
A free, open-source screening tool that takes a gas well's public production history and pressure, estimates how much more gas it would make if a compressor lowered its wellhead pressure, and estimates the horsepower needed. It would use the published Turner and Coleman formulas for the gas rate below which a well fills with liquid and stops flowing.
The briefCredit · unclaimed
Open 01 · the brief
Size a compressor for a tired well
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A free, open-source screening tool that takes a gas well's public production history and pressure, estimates how much more gas it would make if a compressor lowered its wellhead pressure, and estimates the horsepower needed. It would use the published Turner and Coleman formulas for the gas rate below which a well fills with liquid and stops flowing.
Why it is still open
Small screening scripts for liquid loading exist on GitHub, but a search found no public tool that also sizes the compressor and estimates the gain. EPA's vapor recovery guidance shows the kind of payback arithmetic producers use, done by hand.
Built with what exists
Python; public well production data from a state such as Pennsylvania or Texas; the Turner and Coleman equations from the open literature; a coding agent to write and test the code (see the Note "Code no person read").
First step
Pick one county with public monthly well data and list wells whose records show a compressor added.
Done looks like
The tool run on 100 public wells that later had compression installed, as shown in state records. Its predicted gain is compared with the change in reported production, and the median error is published.