Industries / Energy, water and waste / Pipelines and midstream / Compression services
Monitoring and maintenance
Field compressors run unattended. Sensors, analyzers and mechanics keep them running, and contracts pay for the hours they run.
6
Milestones achieved, from 1952 to 2026.
3
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1952
A shared research council
The Gas Machinery Research Council was founded in 1952, in response to the rapid growth of gas pipeline facilities after the Second World War. It funds shared research on compressors and their pulsation and vibration.
Credit
Gas Machinery Research Council
1974
Modelling pressure pulses
Beta Machinery Analysis, incorporated in 1967, developed a digital model to predict pressure pulsation and unbalanced forces in a reciprocating compressor in 1974, which it calls a world first. Pulsation is the pressure wave set up by each piston stroke, which can shake pipes until they crack. It later made portable vibration data collectors.
Credit
Beta Machinery Analysis
2007
Analyzers for piston machines
Windrock, founded in 1989 in Knoxville, Tennessee, made portable and online analyzers that read pressure, vibration and ultrasound on reciprocating compressors. Dover's Gas Equipment Group bought it in 2007.
Credit
Windrock; Steve Follmar
2019
The same parts keep failing
The European Forum for Reciprocating Compressors found that the top five parts causing unscheduled shutdowns, including piston rings, valves and rod packings, came in the same order in its 2019 survey as in 2009.
Lessonten years of improvement did not change which parts break first.
Credit
European Forum for Reciprocating Compressors (André Eijk)
2021
Telemetry on every unit
Archrock chose Detechtion's Enbase system for remote monitoring and control of its compressors in April 2021, to "predict equipment failures before they occur." By May 2021 all its Permian units carried telemetry, a trade magazine reported.
Credit
Archrock (Eric Thode); Detechtion Technologies
2026
Paid for hours running
Kodiak's contracts guarantee mechanical availability, the share of time a unit is ready to run, of 95.0% to 98.0%, its annual report for 2025 says. The same report says skilled mechanics are scarce, especially in the Permian. In March 2026 the International Organization for Standardization published ISO 17934 on condition monitoring of reciprocating compressors.
Credit
Kodiak Gas Services; ISO
Watch for
A chat assistant for field mechanics
Kodiak describes a large language model built for its fleet with Bright AI that helps technicians troubleshoot faster in the field.
Achieved whenKodiak or an outside party publishes before-and-after repair times or availability.
Claimed by
Kodiak Gas Services (John Griggs), November 2025
AI root cause for shutdowns
Detechtion says its new tool uses AI to find patterns and likely causes in compressor shutdowns. No accuracy or time-saved figures are given.
Achieved whena customer or outside party reports measured accuracy against mechanics' findings.
Claimed by
Detechtion.AI, September 2026
A robot inspector at a compression plant
ADNOC has put a Taurob robot to work doing autonomous inspections at its Taweelah gas compression plant, with an operating robot due by the end of 2026.
Achieved whenADNOC or an outside party reports inspections done and faults found over months of use.
Claimed by
ADNOC, June 2026
Open
01
A public set of fault signals
A free, labelled dataset of simulated pressure-volume curves and vibration signals for a reciprocating gas compressor, with known faults seeded in: leaking suction and discharge valves, leaking rod packing and worn piston rings. A pressure-volume curve plots cylinder pressure through one stroke; each fault bends it in a known way.
The briefCredit · unclaimed02
One code list for shutdowns
An open list of shutdown and downtime codes for field compressors, with plain definitions and a rule for counting mechanical availability, plus a sample file, so that fleets and customers measure uptime the same way.
The briefCredit · unclaimed
Open 01 · the brief
A public set of fault signals
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A free, labelled dataset of simulated pressure-volume curves and vibration signals for a reciprocating gas compressor, with known faults seeded in: leaking suction and discharge valves, leaking rod packing and worn piston rings. A pressure-volume curve plots cylinder pressure through one stroke; each fault bends it in a known way.
Why it is still open
The closest public dataset, from IIT Kanpur, records the sound of a 5 horsepower air compressor, not gas compressor pressure or vibration. A 2025 study at the Naval Surface Warfare Center notes "the scarcity of representative historical fault data" and found models trained in one season did poorly in another.
Built with what exists
A thermodynamic cylinder model in Python, with open equations for valve flow and gas properties from the open CoolProp library; Zenodo for publishing; small classifiers as a baseline.
First step
Write the cylinder model for one healthy single-stage cylinder and check its curve against a textbook pressure-volume diagram.
Done looks like
At least 10,000 labelled cycles across five fault types and three gas mixes, published with the code; a baseline classifier's accuracy reported on cycles from operating conditions it never saw in training.
Open 02 · the brief
One code list for shutdowns
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
An open list of shutdown and downtime codes for field compressors, with plain definitions and a rule for counting mechanical availability, plus a sample file, so that fleets and customers measure uptime the same way.
Why it is still open
Contracts guarantee 95% to 98% availability, but Kodiak's filing does not say how downtime is counted, and vendors sell their own standard data structures as products.
Built with what exists
The failure-cause list in the European Forum survey; ISO 14224, the existing standard for equipment reliability data, as a model; a shared spreadsheet and GitHub.
First step
Draft 30 codes from the European Forum's failure-cause list and ISO 14224's compressor section.
Done looks like
A published list of codes and availability rules; three people code the same 100 sample shutdown notes on their own and agree on at least 90%.