Industries / Energy, water and waste / Pipelines and midstream / Compression services
Emissions
Field compressors leak methane from the seals around piston rods, burn some gas incompletely in their engines, and emit nitrogen oxides. Rules and measurements of these have changed fast.
6
Milestones achieved, from 2006 to 2025.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
2006
Rod packing as a methane source
EPA's Natural Gas STAR program reported more than 51,000 reciprocating compressors in the US gas industry, whose rod packing (the ring seals around each piston rod) gave off over 72.4 billion cubic feet of methane a year. It set out when replacing packing pays for itself.
Credit
EPA Natural Gas STAR
2012
A replacement schedule in law
EPA's rule NSPS OOOO, published 16 August 2012, required owners of new reciprocating compressors to replace rod packing every 26,000 hours of operation or every 36 months.
Credit
US EPA
2015
Measuring gathering stations
A Colorado State University team led by Austin Mitchell measured methane at 114 gathering facilities and found that 30% of them gave 80% of the emissions.
Credit
Mitchell, Zimmerle, Marchese, Robinson and others, Environmental Science and Technology
2019
Engines are the largest source
A larger study for the US Department of Energy found that unburned methane passing through engine exhaust, called methane slip, was 38% of gathering station methane, the largest category. Its national total was lower than EPA's inventory, 1,292 against 1,955 gigagrams a year, partly because the earlier study sampled bigger, more complex stations.
Lessonwhich stations are sampled changes the answer.
Credit
Daniel Zimmerle and colleagues, Colorado State University
2024
Tighter limits on two continents
EPA's NSPS OOOOb, published 8 March 2024, requires rod packing on most reciprocating compressors to leak no more than 2 standard cubic feet per minute per cylinder. In July 2024 the European Union's methane regulation required zero-emitting compressors when a site is built or fully refurbished.
Credit
US EPA; European Parliament and Council
2025
US rules undone
Congress disapproved EPA's methane fee rule (the Waste Emissions Charge) in March 2025, and EPA moved most OOOOb deadlines to 22 January 2027. In February 2026 EPA proposed suspending most oil and gas greenhouse gas reporting until 2034.
Lessonfederal methane rules and prices can be reversed within months.
Credit
US Congress; US EPA
Watch for
Capturing packing and blowdown gas
Archrock says its Carbon Hawk system captures gas vented from rod packing and from blowdowns (emptying a unit for work), which it says make up roughly 33% of an engine-driven package's methane, at less than $8 per tonne of carbon dioxide equivalent. Cordova says its CompressorHawk captures both too. Neither has published field results.
Achieved whenmeasured capture rates from field units are published or confirmed by an outside party.
Claimed by
Archrock, November 2025; Cordova, July 2026
Open
01
Count the unburned methane
An open estimate of methane slip from compressor engines for each US gathering and boosting operator and basin, using EPA's public reporting data, EPA's own slip factors and the measured per-engine rates from Colorado State University, showing how much the totals change with the choice of factor.
The briefCredit · unclaimed02
Track New Mexico's engine upgrades
A public table of the compressor engines New Mexico operators have committed to clean up under the state's 2022 rule, with each engine's old and new nitrogen oxide limits, and progress toward the rule's targets of 30% of engines by 2025, 65% by 2027 and 100% by 2029.
The briefCredit · unclaimed
Open 01 · the brief
Count the unburned methane
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
An open estimate of methane slip from compressor engines for each US gathering and boosting operator and basin, using EPA's public reporting data, EPA's own slip factors and the measured per-engine rates from Colorado State University, showing how much the totals change with the choice of factor.
Why it is still open
EPA added default slip factors for engines only in 2024, and has proposed suspending most oil and gas reporting until 2034, so the data may stop. No public estimate by operator was found.
Built with what exists
EPA's public greenhouse gas reporting data (FLIGHT and Envirofacts downloads); Python; a coding agent to write the data pipeline (see the Note "Code no person read").
First step
Download and archive this year's gathering and boosting engine data before any suspension takes effect.
Done looks like
Slip estimates for every reporting gathering and boosting operator for the latest two years, under both EPA's and the measured factors, with the input files archived on Zenodo and the code published.
Open 02 · the brief
Track New Mexico's engine upgrades
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public table of the compressor engines New Mexico operators have committed to clean up under the state's 2022 rule, with each engine's old and new nitrogen oxide limits, and progress toward the rule's targets of 30% of engines by 2025, 65% by 2027 and 100% by 2029.
Why it is still open
The rule sets the schedule, and operators' plans are posted one at a time as public notices, such as a Kinder Morgan plan, but the state's compliance page shows no progress tally.
Built with what exists
The New Mexico Environment Department's public notice site; an AI model that reads long documents and pulls out tables (see the Note "Seven more flagged"); Python.
First step
Download every plan on the public notice site and list each operator and engine count.
Done looks like
Every posted plan in one table, each engine row linked to its page; a second person checks 50 rows and agrees on at least 95%; a published count of engines committed for each target year.