BRENNEN

Industries / Consumer goods / Jewelry

Watches

The watch industry designs, makes, sells and services timepieces worn on the body, from mechanical and quartz wristwatches to smartwatches.

1530

A small spring-driven spherical watch was engraved for the scholar Philip Melanchthon with the words "to God alone the glory, 1530". The Walters Art Museum in Baltimore, which owns it, calls it "the earliest dated watch known" and says only two dated watches from before 1550 survive, from 1530 and 1548. It carries no maker's mark; the museum says scholars concluded in 2014 that it is consistent with an attribution to Peter Henlein of Nuremberg.

art.thewalters.org

33

Milestones achieved across 6 domains.

8

To watch for: announced, not yet confirmed outside.

13

Open deliverables. Nobody has shipped them.

In one minute

Where it started

Watches began in the early 1500s as small spring-driven clocks that could be carried; the oldest dated one is from 1530. Makers then learned to keep time at sea, with John Harrison's H4 tried on a voyage to Jamaica in 1761, and to make parts by machine, at the Waltham factory in Massachusetts from the 1850s. Seiko sold the first quartz wristwatch in 1969, and Swiss watchmaking shrank from almost 90,000 employees at the end of the 1960s to about 30,000 by the mid-1980s, by swissinfo's count.

Where it stands

In 2025 Switzerland exported 14.6 million watches worth CHF 24.4 billion, and watch products of all kinds worth CHF 25.6 billion, 1.7% less than in 2024, by the count of the Federation of the Swiss Watch Industry (FH). China exported 589.5 million watches at an average export price of US$4 each. The FH names US tariff announcements, a fall of more than a third in exports to China over two years, and record prices for gold and the Swiss franc as the main pressures; for January to October 2026 it counts Swiss exports close to CHF 22 billion, 3.4% more than a year earlier. Smartwatch shipments fell 7% in 2024, the market's first decline, and grew 4% in 2025, by Counterpoint Research's count.

What is open

Much of the trade still works by hand, by ear or by eye: assembling ordinary movements, changing batteries, judging what is wrong with a watch from its tick, and telling a good fake from a real watch. There is no public test set for the apps that claim to spot fakes, no public record of how watches keep time as they are worn, and no independent year-long check of the most accurate quartz watches. Phone microphones and cameras, small open AI models and low-cost robot arms are enough to start on each of these.

Domains

AchievedWatch forOpen

Figureheads

1 person

Advances to build with

1 research note

Open in watches

3 of 13 open deliverables

Open · Movements

An escapement bench test

A test bench that drives a movement with a measured, adjustable torque in place of its mainspring and records how far the balance swings (its amplitude) at each torque. Lever, co-axial and silicon escapements are run on the same bench and the curves published.

Built with what exists

A small motor with current control as the torque source, calibrated with weights on a pulley; a phone camera filming at 240 frames a second, with OpenCV software to measure the balance's swing; a bench or phone timegrapher (an instrument that listens to the tick and reports gain or loss) for rate; used movements bought as spare parts.

Credit · unclaimed

Open · Cases and dials

A measured lume register

A dark box, a lamp that gives every dial the same charge of light, and a calibrated camera that measures how bright each watch's lume is at set times afterwards, published model by model.

Built with what exists

A mirrorless or phone camera that saves RAW files; a luminance meter, which measures the brightness of a surface, for calibration; a white LED lamp on a timer; a lightproof box; Python image libraries.

Credit · unclaimed

Open · Assembly and regulation

A robot-built gear train

A robot cell with two low-cost arms, microscope cameras and tweezer grippers that places the wheels of the going train (the gears from the mainspring barrel to the escapement) into a large training movement, such as a pocket-watch movement of the Unitas 6497 type, and screws the bridge down.

Built with what exists

Two SO-101 arms run with Hugging Face's LeRobot (see the Note "No download"); NVIDIA's GR00T 2 model, which learns a task from a few demonstrations (see the Note "Five demonstrations per task"); USB microscope cameras; 3D-printed tweezer tips; a 6497-type movement bought as spare parts; a torque-limited screwdriver.

Credit · unclaimed

Where it sits

Broader

Jewelry