BRENNEN

Industries / Consumer goods / Jewelry / Watches

Cases and dials

The case, crystal, dial, hands and lume (glow-in-the-dark paint) protect the movement and make the time readable.

5

Milestones achieved, from 1926 to 1993.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1926

    A sealed case

    Rolex's Oyster of 1926 was "hermetically sealed against water and dust thanks to a system comprising a bezel, caseback and winding crown screwed onto the case", according to the FH. In 1927 Hans Wilsdorf, Rolex's founder, gave an early Oyster to the swimmer Mercedes Gleitze for a second attempt to swim the English Channel. Sotheby's says she abandoned the swim after more than ten hours in icy water, and the watch "emerged in perfect working order".

    fhs.swisssothebys.com

    Credit

    Hans Wilsdorf and Rolex; Mercedes Gleitze

  2. 1928

    Radium painters win damages

    Women who painted watch dials with radium paint for the U.S. Radium Corporation in Orange, New Jersey, "contracted often-fatal radiation poisoning from brushes they used to paint watch components", and "evidence shows that the company knew of the risks to the workers, but concealed them", says the University of Toledo. Laws then limited claims against employers to accidental injuries, not diseases of the job. Five women settled in 1928 for US$10,000 each, US$600 a year for life and medical expenses; in 1933 the US Public Health Service recommended safety practices, and radium paint was used on dials "as late as the 1960s".

    LessonA paint that made dials readable in the dark killed the workers who applied it, and the law gave them almost no remedy.

    utoledo.edu

    Credit

    Grace Fryer, Edna Hussman, Katherine Schaub, Quinta McDonald and Albina Larice

  3. 1962

    Cases that resist scratches

    Rado launched the DiaStar in 1962 as "the world's first scratchproof watch", with a case of tungsten carbide, which Rado calls hardmetal, and a sapphire crystal, Gear Patrol reports. With its Integral collection of 1986 Rado became, by its own account, "the first watch brand to engage in series production of high-tech ceramic watches". It gives the ceramic's hardness as about 1,250 HV on the Vickers scale, a standard measure of hardness, well above stainless steel, titanium or gold.

    gearpatrol.comfhs.swiss

    Credit

    Rado

  4. 1982

    A standard for divers' watches

    ISO, the international standards body, published its first standard for divers' watches, ISO 6425, in 1982, and revised it in 1984, 1996 and 2018, by Fratello's account. Among other tests, it requires at least 100 metres of water resistance. ISO does not certify watches itself; that needs an independent body accredited for the purpose.

    fratellowatches.com

    Credit

    ISO

  5. 1993

    Lume without radiation

    On 12 March 1993 researchers at Nemoto & Co. in Japan made strontium aluminate with small amounts of europium and dysprosium, a glowing material with no radioactive ingredient. It is sold as LumiNova, Super-LumiNova and LumiBrite. In 2023 North Dakota State University, reporting on research by the physicist Khang Hoang, called it "still the best phosphor commercially available".

    ndsu.edu

    Credit

    Nemoto & Co

Watch for

  1. The thinnest mechanical watch

    Konstantin Chaykin presented the ThinKing Mystery, 1.65 mm thick, in a series of 12 pieces; the movement's mainplate is also the case back. Fratello calls it the thinnest mechanical watch in the world, a "hotly disputed" title that Piaget, Bulgari and Richard Mille were also trying to claim. The one-off ThinKing prototype of 2024 sold at Phillips in 2025 for CHF 508,000.

    Achieved whensomeone outside the maker measures delivered pieces and confirms the 1.65 mm figure.

    fratellowatches.com

    Claimed by

    Konstantin Chaykin, April 2026

Open

  1. 01

    A measured lume register

    A dark box, a lamp that gives every dial the same charge of light, and a calibrated camera that measures how bright each watch's lume is at set times afterwards, published model by model.

    The brief
    Credit · unclaimed
  2. 02

    A side-by-side scratch test

    A rig that draws a diamond tip across samples of case and crystal materials at fixed loads, with a microscope to measure each scratch, and a public table for steel, titanium, coated steel, ceramic, hardmetal and sapphire.

    The brief
    Credit · unclaimed

Open 01 · the brief

A measured lume register

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A dark box, a lamp that gives every dial the same charge of light, and a calibrated camera that measures how bright each watch's lume is at set times afterwards, published model by model.

Why it is still open

ISO 17514, revised in March 2024, "specifies the test methods of various aspects of the photoluminescent deposits applied to time-measuring instruments". A search for this report found no public results of such measurements by watch model.

knowledge.bsigroup.comgenorma.com

Built with what exists

A mirrorless or phone camera that saves RAW files; a luminance meter, which measures the brightness of a surface, for calibration; a white LED lamp on a timer; a lightproof box; Python image libraries.

  1. First step

    Build the box and measure five watches twice to see how repeatable the readings are.

  2. Done looks like

    100 watches measured 1 minute, 1 hour and 4 hours after the same charge, with 10 of them retested a week later within 10% of the first readings, and all raw files and the method published.

Open 02 · the brief

A side-by-side scratch test

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A rig that draws a diamond tip across samples of case and crystal materials at fixed loads, with a microscope to measure each scratch, and a public table for steel, titanium, coated steel, ceramic, hardmetal and sapphire.

Why it is still open

Brands describe their materials in their own figures and words, such as Rado's hardness of about 1,250 HV for its ceramic and the DiaStar's "scratchproof" label. A search for this report found no independent test of these materials side by side under the same conditions.

fhs.swissgearpatrol.com

Built with what exists

A diamond stylus on a linear stage driven by a stepper motor; weights for set loads; a USB microscope; old cases and offcuts from repairers and case makers.

  1. First step

    Build the stylus arm and scratch one steel and one ceramic sample at one load.

  2. Done looks like

    Six materials, three samples each, scratched at three loads, with mean scratch widths published and a second rig reproducing the ranking of the materials.