BRENNEN

Industries / Consumer goods / Jewelry / Watches

Assembly and regulation

Putting a watch together, then adjusting it (regulation) and testing it until it keeps time within set limits.

5

Milestones achieved, from 1844 to 2013.

2

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1844

    Copying plates by machine

    In 1839 the Geneva firm Vacheron and Constantin contracted Georges-Auguste Leschot to improve how it made watches, and he joined full time in 1844. He used a pantograph, a copying machine, "for precisely duplicating the plates of watches in standardized sizes", and built machines for uniform parts, so that its watches "needed much less fitting than before", says the Metropolitan Museum of Art. The Met adds that the first truly interchangeable watch parts in a factory system were "probably" made by American watchmakers.

    metmuseum.org

    Credit

    Georges-Auguste Leschot; Vacheron and Constantin

  2. 1850s

    The first factory watches

    "In the 1850s, watchmakers at the firm began to develop the world's first mass-produced watches," says the Smithsonian's National Museum of American History of the company later called the Waltham Watch Company. They redesigned the watch so its movement "could be assembled from interchangeable parts made on special machines". The firm began in 1849 in Roxbury and moved to Waltham, Massachusetts, in 1854; by 1880 ten American firms made nearly three million watches a year.

    LessonThe museum notes that a "very high level of interchangeability" was reached only well into the 20th century.

    americanhistory.si.edu

    Credit

    the American Waltham Watch Company

  3. 1891

    Rules after a rail crash

    After a railroad accident at Kipton, Ohio, in 1891, the railroad contracted the Cleveland jeweller Webb C. Ball to standardize the time of 125,000 miles of railway in the United States, Canada and Mexico, says a historical marker. The marker's web page, quoting Wikipedia, says the collision of Lake Shore and Michigan Southern Railway trains happened "because an engineer's watch had stopped", and that Ball's rules covered resistance to magnetism, timekeeping in five positions, power reserve, dial layout and records of regular inspections.

    LessonOne stopped watch could kill, so railways set standards for watches and inspected them on a schedule.

    hmdb.org

    Credit

    Webb C. Ball

  4. 1973

    Official chronometer tests

    COSC, the Swiss official chronometer testing body, was founded in 1973 by Swiss watch brands and public authorities. It tests every movement it certifies against the international standard ISO 3159, over 15 days, in five positions and at 8, 23 and 38 °C. It certified 2.1 million movements in 2025 and 57 million since 1973, and says 39% of the mechanical watches Switzerland exported in 2025 were COSC-certified.

    cosc.swisscosc.swisscosc.swiss

    Credit

    COSC

  5. 2013

    Assembly by machine

    In December 2013 the Swatch Group presented Sistem51, a self-winding movement of 51 parts in five modules held by one central screw, with a 90-hour power reserve. It has no regulator; its rate "is set at the factory with a laser". Swatch says Sistem51 "was the first, and remains the only, mechanical movement whose production is entirely automated", and still sells watches built on it. The "first and only" claim is Swatch's own.

    swatchgroup.comswatch.com

    Credit

    the Swatch Group and its ETA unit

Watch for

  1. Testing watches as worn

    On 29 September 2026 COSC presented a new certification, the "COSC Excellence Chronometer". After the usual 15-day movement test, the cased watch goes through 24 hours of simulated wear in six positions, within −2 to +4 seconds a day; a magnetic field of 200 gauss in three directions without stopping, within ±10 seconds a day; and a check that it still runs at the end of its stated power reserve. COSC says these tests were "developed from real-world usage data".

    Achieved whenwatches carrying the certificate are on sale from named brands and COSC publishes how many passed.

    cosc.swisscosc.swiss

    Claimed by

    COSC, September 2026

  2. Rolex adds three tests

    In April 2026 Rolex added three criteria to the Superlative Chronometer certification it redefined in 2015: resistance to magnetism, reliability and sustainability, applied at the design and manufacturing stage, National Jeweler reports. Rolex says the certification is "controlled by internationally recognized, independent Swiss entities"; the report gives no numerical limits for the new tests.

    Achieved whenRolex publishes the limits and the outside body that checks them reports results.

    nationaljeweler.com

    Claimed by

    Rolex, April 2026

Open

  1. 01

    A robot-built gear train

    A robot cell with two low-cost arms, microscope cameras and tweezer grippers that places the wheels of the going train (the gears from the mainspring barrel to the escapement) into a large training movement, such as a pocket-watch movement of the Unitas 6497 type, and screws the bridge down.

    The brief
    Credit · unclaimed
  2. 02

    A public log of rates

    An open dataset of how much watches gain or lose each day as people actually wear them, logged against network time, with notes on hours worn and how each watch lay overnight, and a lab-style test of the same watches for comparison.

    The brief
    Credit · unclaimed

Open 01 · the brief

A robot-built gear train

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A robot cell with two low-cost arms, microscope cameras and tweezer grippers that places the wheels of the going train (the gears from the mainspring barrel to the escapement) into a large training movement, such as a pocket-watch movement of the Unitas 6497 type, and screws the bridge down.

Why it is still open

Swatch says Sistem51, a movement designed for machines, is the only mechanical movement whose production is entirely automated. By that claim, movements of ordinary design are still assembled at least partly by hand.

swatch.com

Built with what exists

Two SO-101 arms run with Hugging Face's LeRobot (see the Note "No download"); NVIDIA's GR00T 2 model, which learns a task from a few demonstrations (see the Note "Five demonstrations per task"); USB microscope cameras; 3D-printed tweezer tips; a 6497-type movement bought as spare parts; a torque-limited screwdriver.

  1. First step

    Record 50 demonstrations, by remote control of the arm, of placing a single wheel into the plate.

  2. Done looks like

    20 filmed attempts from a parts tray to a screwed-down bridge, with a published tally of attempts in which the train turns freely when the barrel is turned; success in at least 10 of the 20.

Open 02 · the brief

A public log of rates

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An open dataset of how much watches gain or lose each day as people actually wear them, logged against network time, with notes on hours worn and how each watch lay overnight, and a lab-style test of the same watches for comparison.

Why it is still open

COSC says its new certification uses tests "developed from real-world usage data", but it has not published that data.

cosc.swiss

Built with what exists

Phone photos of each dial taken beside a clock synced to network time; a phone timegrapher app such as Oscillo for a check in fixed positions; an open database; the five positions of ISO 3159 for the lab-style test.

  1. First step

    Ask 10 volunteers to log one watch each for two weeks with a fixed photo routine.

  2. Done looks like

    100 watches logged daily for 30 days, each tested in five positions before and after, published under an open license.