BRENNEN

Industries / Consumer goods / Jewelry / Watches

Movements

The movement is the engine of a watch: the mainspring, the gears, the balance that swings back and forth, and the escapement, the part that lets the spring's energy out in equal steps.

6

Milestones achieved, from 1761 to 2013.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1761

    A watch-sized sea clock

    John Harrison's H4 "initially looked like a large pocket watch" and "ticks five times a second", says Royal Museums Greenwich, which holds it. In 1761 the Commissioners of Longitude allowed his son William to take it to Jamaica for a trial. They "decided that the test had not been sufficient", and only in February 1765 recommended that Parliament award Harrison £10,000 once he "demonstrated the principles of H4".

    LessonOne good voyage did not satisfy the judges; they wanted the design explained and the result repeated.

    rmg.co.uk

    Credit

    John Harrison and William Harrison

  2. 1801

    A rotating escapement cage

    On 26 June 1801, 7 Messidor of year IX in the French Republican calendar, Abraham-Louis Breguet was granted a ten-year patent for the tourbillon. It mounts the escapement "in a mobile cage that rotates on itself", to even out the timing errors that gravity causes, by Breguet's account.

    breguet.com

    Credit

    Abraham-Louis Breguet

  3. 1924

    Wristwatches that wind themselves

    John Harwood filed a Swiss patent on 16 October 1923, published on 1 September 1924, for a self-winding watch: a case with no openings holding a swinging weight that winds the mainspring as the wearer moves. A history of Bolton's watchmakers says Fortis was the only mass producer willing to make his watches. In 1931 Rolex developed its own self-winding system, the Perpetual rotor, according to the FH.

    patents.google.comboltonclockmaker.orgfhs.swiss

    Credit

    John Harwood; Fortis; Rolex

  4. 1999

    A new escapement in production

    On 12 April 1999 Omega released the Co-Axial escapement developed by George Daniels (1926–2011), which Omega calls "the industry's first practical new watch escapement in some 250 years". By Omega's account its smaller contact surfaces produce less friction and need less lubrication. The Science Museum Group holds one of the 999 De Ville watches of 1999, with calibre 2500, and calls it "the first mass produced watch to use George Daniels' co-axial escapement".

    omegawatches.comcollection.sciencemuseumgroup.org.uk

    Credit

    George Daniels; Omega

  5. 2006

    Silicon hairsprings

    The hairspring is the fine coiled spring that makes the balance swing. In March 2001 Ulysse Nardin showed the Freak, with silicon wheels, from research by Ludwig Oechslin and CSEM, the Swiss Centre for Electronics and Microtechnology. Patek Philippe, Rolex and the Swatch Group then funded more research at CSEM, and Patek Philippe and the Swatch Group, through Breguet, showed the first watches with silicon hairsprings in 2006; Omega followed in 2008 and Rolex in 2014, by WorldTempus's account. It describes silicon as "light, strong, non-magnetic and less sensitive to variations in temperature".

    en.worldtempus.com

    Credit

    CSEM; Ludwig Oechslin; Ulysse Nardin; Patek Philippe; the Swatch Group; Rolex

  6. 2013

    A supplier steps back

    In October 2013 COMCO, the Swiss competition commission, allowed the Swatch Group to stop supplying rival brands with parts from its ETA unit, step by step, an aim Swatch had stated in 2001. Deliveries were cut to 75% of their 2009–2011 average for two years, then to 65% in 2016 and 2017 and 55% in the two years after, and the duty ended on 31 December 2019. COMCO had first refused, because firms without their own capacity "would suffer".

    LessonBrands that relied on a rival for movements were given six years to find other sources or make their own.

    swissinfo.ch

    Credit

    COMCO; the Swatch Group

Watch for

  1. An open-source movement

    The Openmovement foundation has released STEP files, a common 3D design format, for OM10, a mechanical movement it describes as serviceable and modular and suited to schools and new watchmakers. Hackaday reports that it runs at 3.5 Hz (25,200 beats an hour) with what the foundation calls a "Swiss pallets escapement", and that a crowdfunding campaign for kits ran until 7 June 2025.

    Achieved whenmovements built from the files or kits are in owners' hands and someone outside the foundation publishes how well they keep time.

    hackaday.com

    Claimed by

    the Openmovement foundation, June 2025

Open

  1. 01

    An escapement bench test

    A test bench that drives a movement with a measured, adjustable torque in place of its mainspring and records how far the balance swings (its amplitude) at each torque. Lever, co-axial and silicon escapements are run on the same bench and the curves published.

    The brief
    Credit · unclaimed
  2. 02

    Timing an open movement

    Ten OM10 movements made from the published files, each timed for 15 days in five positions and at three temperatures as in a chronometer test, with the cost of every part published.

    The brief
    Credit · unclaimed

Open 01 · the brief

An escapement bench test

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A test bench that drives a movement with a measured, adjustable torque in place of its mainspring and records how far the balance swings (its amplitude) at each torque. Lever, co-axial and silicon escapements are run on the same bench and the curves published.

Why it is still open

Makers describe the efficiency of their escapements in their own words. Omega says the co-axial produces less friction and needs less lubrication. Europa Star reports that Rolex filed seven patent applications for its Dynapulse escapement and designed it to lose as little of the spring's energy as possible. Neither gives a figure measured by an outside party, and a search for this report found no side-by-side measurement.

omegawatches.comeuropastar.com

Built with what exists

A small motor with current control as the torque source, calibrated with weights on a pulley; a phone camera filming at 240 frames a second, with OpenCV software to measure the balance's swing; a bench or phone timegrapher (an instrument that listens to the tick and reports gain or loss) for rate; used movements bought as spare parts.

  1. First step

    Take the mainspring out of one used lever-escapement movement, turn its barrel with the motor, and plot the amplitude at five torques.

  2. Done looks like

    Amplitude-against-torque curves for at least four escapement types, three movements each, with a second bench built from the same plans reproducing every curve within 5%.

Open 02 · the brief

Timing an open movement

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

Ten OM10 movements made from the published files, each timed for 15 days in five positions and at three temperatures as in a chronometer test, with the cost of every part published.

Why it is still open

The design files are public and kits were crowdfunded in 2025, but a search for this report found no published timing results for a finished OM10.

hackaday.com

Built with what exists

The OM10 STEP files; a CNC micro-lathe and mill, or a contract shop that turns watch parts; a bench timegrapher, checked against a phone app such as Oscillo; a cool box and a warm box held at 8 °C and 38 °C, two of the temperatures COSC uses.

  1. First step

    Download the files and ask two machine shops to quote for one set of wheels and plates.

  2. Done looks like

    Ten finished movements with 15 days of rate readings each, published with a parts-cost table that someone else can check against quotes.