BRENNEN

Industries / Energy, water and waste / Power generation

Solar panels

The solar panel industry refines silicon, turns it into cells that make electricity from sunlight, seals the cells into weatherproof panels, builds the inverters and racks that put panels to work, and takes old panels apart again.

1954

On 25 April 1954 Bell Labs showed a silicon solar cell that turned about 6% of the sunlight falling on it into electricity, which IEEE calls the first practical photovoltaic cell.

ethw.org

40

Milestones achieved across 6 domains.

11

To watch for: announced, not yet confirmed outside.

12

Open deliverables. Nobody has shipped them.

In one minute

Where it started

Bell Labs showed a practical silicon solar cell in 1954, and satellites were its first buyers, starting with Vanguard 1 in 1958. The pure silicon came from the Siemens process, which was invented for chips. From 1976 NASA's Jet Propulsion Laboratory bought panels for use on the ground in five rounds and set tests each design had to pass; field records later showed that panels designed before the toughest round failed at a rate of 45%, and those after it at under 0.1%.

Where it stands

Factories made about 706 GW of panels in 2025, almost all on single-crystal silicon wafers, and could have made about twice as many, by the counts of Fraunhofer ISE and the ITRPV industry survey. About three-quarters of cells now use a design called TOPCon, and both polysilicon plants and panel factories can make far more than the market buys. Independent testing still finds faults: Kiwa PVEL reported in November 2026 that 87% of the manufacturers it tested had at least one failure, most often glass breaking under load or hail.

What is open

Much of what is known about the industry is sold privately or published only as averages: which plants make polysilicon and how much, how much silver is on a named cell, what glass goes into each panel model, and what recyclers actually recover from old panels. Some work is still done by hand, such as laying up custom-shaped panels for buildings. Each of these can be attempted with public documents, language models that read them, low-voltage bench tests, free satellite images and small robot arms.

Domains

AchievedWatch forOpen

Advances to build with

2 research notes

Open in solar panels

3 of 12 open deliverables

Open · Silicon and wafers

A public polysilicon plant register

A free table of every plant that makes solar-grade polysilicon, giving owner, location, process (Siemens rods or fluidized-bed granules), yearly capacity, start and stop dates and main power source, with every value tied to a dated public document such as an annual report, a stock-exchange notice or an environmental permit. Add an estimate of carbon dioxide per kilogram of silicon from each plant's power source, with the method published.

Built with what exists

company annual reports and exchange filings (HKEXnews, the Shanghai Stock Exchange, SEC EDGAR); environmental permit notices; Sentinel-2 satellite images and OpenStreetMap to confirm each site; a language model to pull fields out of long filings, with every value checked by a person against the cited page; a public Git repository holding CSV files.

Credit · unclaimed

Open · Cells

Weigh the silver in cells

An independent, brand-by-brand table of how much silver and copper is on the cells sold today (TOPCon, heterojunction, back-contact and the new copper-metallized cells), measured by a lab, so that makers' and roadmap figures can be checked.

Built with what exists

loose cells bought on the open market, or cells that a recycler separates from new panels; a commercial analytical lab that measures metals by ICP-OES (a method that measures metals dissolved from a sample; the lab handles the acids); a rented handheld X-ray fluorescence analyzer for quick screening; a USB microscope with ImageJ or OpenCV to count and measure the printed lines; a scale; a public spreadsheet.

Credit · unclaimed

Open · Module assembly

Robot lays up custom modules

A robot arm that does the hand steps of a line making building-integrated modules (panels made to fit a particular facade or roof, in many shapes and sizes, in batches as small as one): placing the pre-wired cell blocks on the glass to match a layout file, then joining their end connections. Tested on unlaminated layups made with scrap cells.

Built with what exists

A collaborative robot arm with vacuum cups; an overhead camera; an open robot model trained from human demonstrations (see the Note "Five demonstrations per task" and the Note "Open robot model weights"); LeRobot tools for recording and training (see the Note "No download"); a low-voltage bench power supply and a camera that sees the faint glow of a powered cell (electroluminescence) to check cells for cracks before and after.

Credit · unclaimed

Where it sits