Industries / Technology / Telecommunications / Networking equipment
Wi-Fi
This work makes the radios, chips and access points that connect phones, laptops and other devices to a network without cables, and writes the standards that let gear from different makers work together.
7
Milestones achieved, from 1971 to 2024.
2
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1971
Radio packets share a channel
In June 1971 the ALOHA packet radio network began giving users on several Hawaiian islands access to the University of Hawaii's computers over radio. Every terminal used the same channel and sent a packet whenever it had data; if no acknowledgment came back, it assumed a collision and sent the packet again after a random wait. The IEEE milestone citation says ALOHAnet was the first to show that a channel could be shared efficiently on a large scale with such simple random access, and that it "led directly" to Ethernet and personal wireless technologies.
Lessonmany senders can share one channel without a central scheduler if each backs off for a random time after a collision.
Credit
Norman Abramson and Franklin Kuo, University of Hawaii
1985
Radio without a licence
On 9 May 1985 the US Federal Communications Commission (FCC) let anyone use spread spectrum radios, which spread a signal across a wide range of frequencies, without a licence in three bands set aside for industrial, scientific and medical (ISM) machines such as microwave ovens. Michael Marcus, the FCC engineer who directed the work, calls it the world's first general authorization of civil spread spectrum and says Wi-Fi, Bluetooth and most cordless phones operate under these rules.
LessonMarcus writes that a 1990 amendment setting a minimum "processing gain", a measure tied to one spreading method, came close to blocking 802.11b from the market; a rule that prescribes a technique can shut out a better one.
Credit
Michael Marcus and the FCC under Chairman Mark Fowler
1997
One standard for wireless LANs
In November 1987 engineers at NCR's laboratory in Nieuwegein, the Netherlands, showed a radio network for linking cash registers to a back-office computer, so shops would not have to drill through their floors for cables. Their WaveLAN reached 2 Mbit/s, about ten times rival systems, by the IEEE milestone's account. The team pushed the IEEE to form the 802.11 working group, which first met in September 1990 with Vic Hayes as chair, and the IEEE standards board ratified the first standard, IEEE 802.11-1997, in mid-1997. Its 2 Mbit/s radio method came from WaveLAN and is still required for Wi-Fi certification.
Credit
NCR's WaveLAN team (part of AT&T from 1991 and Lucent from 1996); Vic Hayes
1999
A wireless card for $99
Steve Jobs asked suppliers for a wireless card Apple could sell for $100, when cards cost about $350. Lucent's WaveLAN team took the order and set up low-cost production, and Apple launched AirPort at Macworld on 21 July 1999, with a $99 card and a $299 access point. Apple had asked for 2 Mbit/s and got 11 Mbit/s, using the new 802.11b amendment that the WaveLAN team proposed with Harris Semiconductors. By the milestone's account, other PC makers then asked for their own versions, and rival efforts, HomeRF and HIPERLAN, stopped product development.
Lessona price target, more than a speed target, took wireless networking to the mass market.
Credit
Apple; Lucent Technologies' WaveLAN team; Harris Semiconductors
2001
Wi-Fi encryption broken
WEP (Wired Equivalent Privacy) was the encryption in the 1997 standard. Scott Fluhrer of Cisco and Itsik Mantin and Adi Shamir of the Weizmann Institute showed in 2001 that WEP built each packet's key by joining a fixed secret to a 3-byte counter sent in the clear, and that a listener could recover the secret from the first byte of enough packets. They had not attacked a real network. Adam Stubblefield of Rice University and John Ioannidis and Aviel Rubin of AT&T Labs did, and concluded that "802.11 WEP is totally insecure"; capturing the packets took longer than any other part of the attack.
Lessona cipher can fail through the way a system feeds it keys; the three authors advised hashing the counter and the secret together instead of joining them.
Credit
Fluhrer, Mantin and Shamir; Stubblefield, Ioannidis and Rubin
2020
A new band for Wi-Fi
On 23 April 2020 the FCC made the whole 6 GHz band, 5.925 to 7.125 GHz, or 1,200 MHz, available for unlicensed use, which it said would raise the spectrum available to Wi-Fi by nearly five times. Low-power access points may use the full band indoors. Standard-power access points may use 850 MHz of it under automated frequency coordination, a database that keeps them away from licensed microwave links run by utilities, public safety agencies and others.
Credit
US Federal Communications Commission
2024
Wi-Fi 7 certified
On 8 January 2024 the Wi-Fi Alliance, the industry group that tests products for compatibility, began certifying Wi-Fi 7 devices, based on IEEE 802.11be. Wi-Fi 7 adds 320 MHz channels in countries that open the 6 GHz band, and multi-link operation (MLO), which lets a device send and receive over two or more bands at once. The Alliance expected 233 million Wi-Fi 7 devices to enter the market in 2024. In January 2026 it added a certification option for devices that use only 20 MHz channels, such as sensors and wearables, RCR Wireless reported.
Credit
Wi-Fi Alliance; IEEE 802.11
Watch for
Wi-Fi 8 before the standard
Wi-Fi 8 (IEEE 802.11bn) aims at reliability rather than peak speed: smoother roaming between access points, better performance far from the router, and access points that coordinate their power and beams so neighbouring networks interfere less. Broadcom announced Wi-Fi 8 chips built to draft 1.5 of the standard in October 2025, and on 27 May 2026 three more chips for home routers, already going to makers for evaluation; The Register names TP-Link, Netgear and Asus among its partners. ABI Research expects significant Wi-Fi 8 volumes from 2028.
Achieved whenthe IEEE approves 802.11bn and an independent lab measures roaming or edge-of-coverage gains on shipping Wi-Fi 8 products against Wi-Fi 7.
Claimed by
Broadcom, October 2025 and May 2026
Routers that sense movement
Wi-Fi sensing reads how people moving through a room change the Wi-Fi signals passing through it. The IEEE published 802.11bf, an amendment for wireless LAN sensing, on 26 September 2025. In August 2026 Comcast, the largest home internet provider in the US, launched WiFi Motion, a free feature that turns its Xfinity routers into motion sensors; PCWorld reported that it can "accurately detect and track people and objects."
Achieved whenan independent test publishes detection and false-alarm rates for the feature in homes its makers did not tune it for.
Claimed by
Comcast, August 2026
Open
01
Multi-link Wi-Fi in flats
A public field study of Wi-Fi 7 multi-link operation in apartment buildings, where dozens of neighbouring networks crowd the same channels. In each flat, with the residents' consent and on networks they own, run the same throughput and latency tests with MLO on and off, on access points from at least three makers, and publish every raw log.
The briefCredit · unclaimed02
Motion sensing, tested outside
An independent, repeatable test of the motion-sensing features now sold in home routers: staged walk-ins and walk-outs, plus long empty-home periods with fans, curtains and pets moving, scored for detection rate, false alarms per day and delay to alert.
The briefCredit · unclaimed
Open 01 · the brief
Multi-link Wi-Fi in flats
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public field study of Wi-Fi 7 multi-link operation in apartment buildings, where dozens of neighbouring networks crowd the same channels. In each flat, with the residents' consent and on networks they own, run the same throughput and latency tests with MLO on and off, on access points from at least three makers, and publish every raw log.
Why it is still open
Field trials of MLO in homes are few and narrow. The CableLabs and Intel trial for the Wireless Broadband Alliance, published in February 2026, used one 4,500-square-foot detached house and one client chip, Intel's BE200. A 2023 study built on recorded spectrum measurements found that MLO can make latency worse when one band is much busier than the other, but it did not test shipping routers. arXiv searches on 20 November 2026 found test platforms and simulations, not multi-building field data.
Built with what exists
Wi-Fi 7 access points with MLO from three makers; laptops with Intel BE200 Wi-Fi 7 cards; iperf3 for throughput and Flent for latency under load; a second laptop logging how busy each channel is; Zenodo for a citable data release.
First step
Write the test script, run it in two flats with one access point, and post the protocol for comment.
Done looks like
At least 30 flats in at least 3 buildings, each tested at three distances from the access point with MLO on and off; published throughput, median and 99th-percentile latency under load, and the share of runs in which MLO did worse than a single link; raw logs and scripts that reproduce every chart.
Open 02 · the brief
Motion sensing, tested outside
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
An independent, repeatable test of the motion-sensing features now sold in home routers: staged walk-ins and walk-outs, plus long empty-home periods with fans, curtains and pets moving, scored for detection rate, false alarms per day and delay to alert.
Why it is still open
Comcast switched on WiFi Motion in August 2026. Cognitive Systems, which developed WiFi Motion, wrote that when it began "there were no industry agreed-upon KPIs or test methodologies available" and that it built its own. Public datasets such as CSI-Bench (2025: 461 hours from 26 indoor environments) score models on recorded signals, not the alerts a product actually gives. Searches on 20 November 2026 found no independent test of a shipping feature.
Built with what exists
Homes that already have a motion-sensing router, with every resident's written consent; door contact sensors and a logged schedule of staged events as ground truth, with no cameras; ESP32 boards running Espressif's open-source ESP-CSI to record the raw signal alongside; the IEEE 802.11bf text, free through the IEEE GET program, for test terms.
First step
Write the test protocol and run 50 staged events in one room with one product.
Done looks like
Every motion-sensing router feature the team can buy or subscribe to, starting with WiFi Motion, tested in at least 5 homes, with at least 300 staged events and 200 hours of empty-home time per product; a published protocol, and per-product detection rate, false alarms per day and median time to alert, with all logs released.