BRENNEN

Industries / Technology / Telecommunications / Networking equipment

Routers and switches

This work designs and builds the boxes that pass data between networks (routers) and inside them (switches), and the chips in them that pick, in a few billionths of a second, where each packet goes next.

6

Milestones achieved, from 1985 to 2025.

2

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1985

    Loops made harmless

    A bridge joins two Ethernet cables so that they act as one network, called an extended LAN. If bridges are wired in a loop, for backup, frames can circle forever. Radia Perlman published a method by which the bridges agree among themselves on a loop-free set of links, a spanning tree, using little memory per bridge and settling in a time set by the network's width, not its size. The Internet Hall of Fame says her spanning tree algorithm turned Ethernet from a single shared wire into "a protocol that can handle large clouds."

    api.crossref.orginternethalloffame.org

    Credit

    Radia Perlman

  2. 1986

    Routers sold as products

    Cisco's AGS router, introduced in 1986, "was able to map one network protocol into another," by the Computer History Museum's account; its software was first written by Bill Yeager at Stanford, then licensed and extended by Cisco's founders, Len Bosack and Sandy Lerner. Kirk Lougheed, Cisco's first engineer, joined in July 1986 and says the first dozen routers were built and tested in the founders' living room in Atherton, California, and shipped to universities and HP.

    computerhistory.orgnewsroom.cisco.com

    Credit

    Bill Yeager (Stanford University); Len Bosack, Sandy Lerner and Kirk Lougheed (Cisco)

  3. 1994

    Switches take over Ethernet

    On shared Ethernet every computer on a cable takes turns using its capacity. A switch passes each frame only toward the port where its destination sits, so many pairs of computers can talk at once. On 24 October 1994 Cisco agreed to buy Kalpana, which it called "the leading provider of Ethernet switches worldwide" and "considered to be the inventor of Ethernet switching," for 7,480,114 Cisco shares. Cisco credited Kalpana with cut-through switching, which starts sending a frame on before it has fully arrived, and full-duplex Ethernet, which sends and receives at the same time.

    newsroom.cisco.com

    Credit

    Kalpana (president Jim Jordan); Cisco

  4. 1998

    Forwarding moves into chips

    Early routers were ordinary computers running routing software, and by the early 1990s they could not keep up with traffic. Juniper's M40, first released in 1998, was "the first commercially-successful product to use specialized ASIC technology to forward packets" without software slowing them, by the Computer History Museum's account; an ASIC (application-specific integrated circuit) is a chip designed for one job. Capacity rose from a few Gbit/s to tens of Gbit/s per router. A separate x86 processor running FreeBSD worked out the routes.

    Lessonthe museum says the split between fast custom forwarding chips and route software on an ordinary operating system is still how the largest routers are built.

    computerhistory.org

    Credit

    Juniper Networks

  5. 2014

    The table outgrows the memory

    A router keeps its forwarding table in fast memory, often TCAM (ternary content-addressable memory), which checks every entry in one step but is costly, so its size is fixed when the router is bought. Some older routers could by default hold about 512,000 IPv4 routes. On 12 August 2014 a burst of new routes at about 07:48 UTC pushed many tables past that line. RIPE NCC, which runs Europe's address registry, counted a spike of about 140 networks missing from the global routing system some 15 minutes later, mostly small ones, and found that the internet "certainly didn't go up in flames."

    LessonGeoff Huston of APNIC, the Asia-Pacific registry, advises buying forwarding memory for the table expected years ahead, since under-buying forces early retirement of the router.

    labs.ripe.netpotaroo.net

    Credit

    measured by Emile Aben, RIPE NCC

  6. 2025

    A million routes

    Huston counts the global routing table each January from one fixed vantage point. The IPv4 table held about 996,000 entries in January 2025 and 1,050,000 in January 2026; the IPv6 table held 242,000. Growth ran at about 100 new IPv4 entries a day from mid-2021 to mid-2025, then doubled to about 200 a day in the second half of 2025. His straight-line models give about 1.2 million IPv4 and 391,000 IPv6 entries by January 2031.

    Lessonthe growth rate doubled within one year after four steady years, so table forecasts can shift quickly.

    potaroo.net

    Credit

    Geoff Huston, APNIC

Watch for

  1. Ports at 1.6 terabits

    Cisco says its Silicon One G300 chip switches 102.4 Tbit/s and drives 1.6 Tbit/s Ethernet ports, and that new Nexus 9000 and Cisco 8000 systems built on it each carry 64 sockets for 1.6 Tbit/s optics. At the Open Compute Project summit in October 2026 Cisco said the first G300 systems were shipping, according to NAND Research's summary. The IEEE standard for 1.6 Tbit/s Ethernet, 802.3dj, passed its first ballot of the IEEE Standards Association on 26 March 2026 with 77% approval, against a 75% threshold, and is not yet final.

    Achieved whenIEEE approves 802.3dj, and a customer or independent lab reports 1.6 Tbit/s ports carrying traffic on shipping systems.

    heise.denand-research.comgrouper.ieee.org

    Claimed by

    Cisco, February and October 2026

  2. Clouds build their own routers

    Cisco said in October 2026 that Alibaba Cloud has deployed its own router, Quantum Cat, built on Cisco's 51.2 Tbit/s P200 routing chip and running the open SONiC operating system, across its eCORE backbone, and that Microsoft has moved P200 systems into production. Both claims reach the public through Cisco's announcements.

    Achieved whenAlibaba Cloud or Microsoft publishes operating figures for these routers, such as traffic carried or failures, or an outside party measures them.

    nand-research.com

    Claimed by

    Cisco, with Alibaba Cloud, October 2026

Open

  1. 01

    A route-capacity table, tested

    A public table of how many IPv4 and IPv6 routes each router and switch model can hold in its forwarding hardware, under each memory profile it offers, with the year each one fills up on Huston's projections. Alongside it, a bench test of five second-hand models: load a real full routing table, count how many routes each actually installs, and record what it does past the limit, such as an alarm, a crash or silently missing routes.

    The brief
    Credit · unclaimed
  2. 02

    SONiC on second-hand switches

    A public record of which used data center switches, of the kind a school or small lab can buy cheaply, run current community releases of SONiC, the open-source switch operating system, and how they score on the project's own test suite, per model and per release.

    The brief
    Credit · unclaimed

Open 01 · the brief

A route-capacity table, tested

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public table of how many IPv4 and IPv6 routes each router and switch model can hold in its forwarding hardware, under each memory profile it offers, with the year each one fills up on Huston's projections. Alongside it, a bench test of five second-hand models: load a real full routing table, count how many routes each actually installs, and record what it does past the limit, such as an alarm, a crash or silently missing routes.

Why it is still open

The figures sit in scattered datasheets and talks and depend on configuration. In February 2026 an operator on the NANOG mailing list asked for a router that "routes in hardware at least 2m routes combined of IPv4 and IPv6," and got advice, not a list. At Peering Days 2025 Vince Schuele of EPS Global showed two merchant-chip models that "can not hold a full IPv4 and IPv6" table at once and said that when hardware is full, routes are not installed and are unreachable from the device. Web and GitHub searches on 20 November 2026 found no model-by-model table.

seclists.org2025.peeringdays.eu

Built with what exists

Vendors' datasheets and configuration guides; full-table dumps from RIPE NCC's Routing Information Service, published in MRT format (about 425 MB for one collector's daily table); GoBGP, whose gobgp mrt inject command loads such a dump into a BGP session; used routers on a bench cut off from any live network; an AI model to pull figures out of PDFs, quoting the sentence each came from, with every figure checked by hand.

github.com

  1. First step

    Download one RIS full-table dump, load it into GoBGP on a laptop, feed it to one second-hand router, and log the installed-route count every 10,000 routes.

  2. Done looks like

    At least 100 models, every figure linked to its source page and dated; five used models tested on the bench, with installed-route counts, behavior at the limit and the scripts published, and each measured count set beside the documented one.

Open 02 · the brief

SONiC on second-hand switches

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public record of which used data center switches, of the kind a school or small lab can buy cheaply, run current community releases of SONiC, the open-source switch operating system, and how they score on the project's own test suite, per model and per release.

Why it is still open

SONiC's platform list records for each model whether an image builds ("Successful build"), not whether it passes tests on the hardware. The community hardware lab at the University of New Hampshire InterOperability Laboratory (UNH-IOL) tests on "hardware platforms provided by SONiC project members," which are current products, not the older models on the resale market.

sonic-net.github.ioresults.sonic.iol.unh.edu

Built with what exists

Used switches on SONiC's list, such as the Accton AS5712-54X (Broadcom Trident 2, 72 × 10G ports); community SONiC images; the project's sonic-mgmt repository of tests; TRex, Cisco's open-source traffic generator; patch cables and one server.

  1. First step

    Buy one AS5712-54X or similar listed switch, install the latest image, run the sonic-mgmt sanity tests and publish the log.

  2. Done looks like

    Ten models, each tested on the two latest community releases, with pass, fail and skip counts per test, raw logs, and an upstream issue filed for every failure, published in the same form as the UNH-IOL results dashboard.