BRENNEN

Industries / Industrial equipment and services / Industrial services

Heat exchanger services

Heat exchanger services open, clean, test, repair and close up the heat exchangers of refineries, chemical plants, power stations and large buildings, the devices in which one fluid heats or cools another through the walls of tubes or plates.

1941

The Tubular Exchanger Manufacturers Association (TEMA), a trade group of exchanger makers founded in 1939, published the first edition of its standards. They listed minimum fouling factors, the extra resistance to heat flow that a designer allows for the deposits that build up between cleanings.

tema.orgtema.orgchemicalprocessing.com

35

Milestones achieved across 6 domains.

6

To watch for: announced, not yet confirmed outside.

13

Open deliverables. Nobody has shipped them.

In one minute

Where it started

Roller expanders, which fix each tube into the thick plate that holds the tube ends, were already in common use when Richard Dudgeon and John Weeks patented an improved one in 1891. TEMA's first standards of 1941 set the fouling allowances designers still use; a 2023 review in Chemical Processing says they rested on "a consensus of experience" and have changed very little since. Tube bundles were jacked out by workers standing on steel scaffolds until crane-carried extractors were patented in 1962 and 1971, and from 1953 Josef Taprogge's rubber balls cleaned condenser tubes while the plant kept running.

Where it stands

Bundles are pulled by hydraulic extractors hung from cranes. Tubes are tested by probes drawn through each one, by eddy current, remote field or rotating ultrasound, and joints are closed to written guidelines such as ASME PCC-1 (2000) and the European competence standard EN 1591-4 (2013). Refiners such as TOTAL track the fouling of each exchanger with software and plan cleaning from it, yet joints still fail on restart: at CITGO's refinery in Sulphur, Louisiana, a joint assembled with the wrong bolt sizes leaked hydrogen and caught fire in 2023.

What is open

Much of the evidence stays private. HOIS, an industry inspection program, keeps its 2024 blind trial of steel tube inspection methods to members, refinery fouling records stay inside each plant, and no public count of retubes or joint leaks was found. Open jobs include a public blind trial on retired tubes, an open fouling benchmark, coded records of bundle and joint incidents, and bench tools a small team can test without live plant: a robot that plugs tubes from a tube map, an open acoustic tube tester and a checker for bolting sheets.

Domains

AchievedWatch forOpen

Advances to build with

2 research notes

Open in heat exchanger services

3 of 13 open deliverables

Open · Opening and pulling bundles

Bundle weights from old drawings

A tool that reads a heat exchanger's specification sheet and its general arrangement drawing, often a scanned PDF, and returns the bundle's weight, length, diameter and center of gravity, the figures a planner needs to choose an extractor and a crane, with each number linked to the place on the page it came from and the arithmetic shown.

Built with what exists

A model that reads PDFs and drawings, such as Claude Fable 5.2 (Notes: "Three working devices") or an open model fine-tuned on one GPU, such as Liquid LFM3 (Notes: "One GPU to fine-tune"); Python with pdfplumber; a short geometry calculation (tube count, tube size and length, tubesheets, baffles, steel densities) written out so an engineer can check it.

Credit · unclaimed

Open · Cleaning

Measure what cleaning restores

A public table of how much heat-transfer performance exchangers get back from each cleaning method (hydroblasting, chemical cleaning in place, ultrasonic baths, thermal cleaning), worked out from the temperatures and flows plants already log. For each job it gives the fouling resistance just before shutdown, just after restart and 30 days later, with exchanger type, fluid and deposit.

Built with what exists

Historian exports (flows and the four inlet and outlet temperatures) from cooperating plants; the open Python libraries ht and CoolProp for exchanger and fluid-property calculations; pandas; WebPlotDigitizer to read before-and-after values off published graphs; a document-reading AI model to pull job details from cleaning reports, with a person checking every row (Notes: "Seven more flagged").

Credit · unclaimed

Open · Tube testing

Steel tube methods, tested publicly

A public blind trial for carbon steel exchanger tubes. At least 100 retired tubes are scanned by four or more methods (remote field, near field, magnetic flux leakage, IRIS), each run by a different team that has not seen the others' results. Every tube is then cut into short pieces and its wall mapped with a 3D scanner, and the scans, the cut-tube truth and each method's hits and misses are published.

Built with what exists

Retired, cleaned carbon steel tubes from a retubing shop or scrap yard; remote field, near field and IRIS instruments such as Eddyfi's Ectane 2 (used in the 2026 study), run by volunteer service companies; a band saw; a handheld 3D scanner such as Creaform's HandySCAN (also used in the 2026 study); Python for detection-rate curves.

Credit · unclaimed

Where it sits