BRENNEN

Industries / Consumer goods

Furniture

The furniture industry designs and makes the chairs, sofas, tables, beds, storage and desks used in homes and offices, and delivers them to the room where they will stand.

1859

Gebrüder Thonet, the Vienna firm of Michael Thonet and his sons, designed chair No. 14: six pieces of steam-bent beech that packed flat, 36 chairs to a crate of one cubic meter, and were joined with ten screws and two nuts where they were sold. The Victoria and Albert Museum calls Thonet's furniture the first to have been both mass produced and shipped knocked-down, and Thonet says more than 50 million No. 14 chairs had been made by 1930.

collections.vam.ac.ukphilamuseum.orgthonet.de

34

Milestones achieved across 6 domains.

9

To watch for: announced, not yet confirmed outside.

12

Open deliverables. Nobody has shipped them.

In one minute

Where it started

For centuries furniture was made by hand in small workshops, and in 1754 the London cabinetmaker Thomas Chippendale published a book of his designs that makers across Europe and America copied. Factory furniture began in the mid-1800s, when the Thonet family in Vienna mass-produced bentwood chairs that shipped in pieces, and furniture towns such as Grand Rapids, Michigan, moved their factories from water power to steam. In the 20th century designers took up steel tube and molded plastic, and IKEA, from the 1950s, had buyers carry flat packs home and build them.

Where it stands

CSIL, a research institute in Milan, estimates that the world made about $472 billion of furniture in 2025 and traded nearly $180 billion of it across borders, about 1% of all trade in manufactured goods. By CSIL's count Asia and the Pacific made more than half of the world's furniture in 2024; China, Vietnam, Poland, Italy and Germany export the most, and the United States imports the most. The most automated panel plants cut, drill and edge each cabinet part to order under computer control, while covering seats, touching up finishes and building flat packs are still done mostly by hand.

What is open

Many checks in this industry are still made by eye or by rule of thumb: whether a finish or an edge strip is flawed, how much fabric a sofa needs, whether an old dresser will tip and whether a new sofa will get up the stairs. No published robot has yet driven the screws and turned the cam locks of a store-bought flat pack, or covered seats in many fabrics with its results counted. Phone depth scanners, open image and robot models, and AI models that write code now let a small team build these checks and tools and publish results that others can repeat.

Domains

AchievedWatch forOpen

Narrower industries

Mattresses

Advances to build with

2 research notes

Open in furniture

3 of 12 open deliverables

Open · Design

Tip check for older dressers

A method, guided by a phone app, that tells a household whether a dresser it already owns would pass the ASTM F2057-23 stability tests. The owner first ties the dresser to the wall with an anti-tip strap so it cannot fall, opens the drawers, and pulls down on the edge of the top drawer with a cheap force gauge or luggage scale, reading the force at which the back feet start to lift. The app turns that force and the drawer's reach into a tip-over moment, the turning force about the front feet, and compares it with the moment the standard's 60-pound (27 kg) test applies. A public table lists results by make and model.

Built with what exists

A digital luggage scale or push-pull force gauge, a tape measure, a store-bought anti-tip strap, the ASTM F2057-23 test procedure, and a phone app built with an open framework such as Expo, using the phone's augmented-reality measuring tools (Apple ARKit or Google ARCore) to measure how far each drawer reaches.

Credit · unclaimed

Open · Cutting and machining wood

Public cut lists from shops

An open benchmark of real cabinet and furniture cutting jobs. Each job gives the part list (sizes, quantities, material, grain direction, which edges get banding), the sheet sizes in stock and the layout the shop actually cut, with customer details removed. Then a fair race of cutting optimizers, open and commercial, on those jobs, scoring sheets used, offcuts worth keeping and saw cycles.

Built with what exists

Python; Google OR-Tools' CP-SAT solver for a strong baseline; open guillotine-cutting projects on GitHub; trial versions of commercial optimizers; the 2DPackLib file format, so results can be compared with the academic sets.

Credit · unclaimed

Open · Upholstery

Robot seat covering across fabrics

A robot cell that covers drop-in chair seats (a board, a layer of foam and a fabric cover stapled underneath), trained from people's demonstrations, and a public tally of how well it does on many kinds of fabric.

Built with what exists

A collaborative robot arm with force sensing, such as a Universal Robots UR10e, holding a pneumatic upholstery stapler on a custom mount, with a wrist camera, run inside a fenced or light-curtained cell; LeRobot to record demonstrations and train (see the Note "No download"); a pretrained robot model to fine-tune, such as NVIDIA's GR00T 2 (see the Note "Five demonstrations per task") or Runway's Praxis-1 (see the Note "Open robot model weights").

Credit · unclaimed