BRENNEN

Industries / Consumer goods / Furniture

Upholstery

Fitting springs, foam and padding over a frame and covering them in fabric or leather, to make chairs, sofas and other seats soft.

6

Milestones achieved, from 1828 to 2021.

2

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1828

    Springs go into seats

    Samuel Pratt, a maker of camp equipment on New Bond Street in London, patented the coiled spring in 1828, according to the design historian John Gloag. It went first into mattresses. By the early 1830s factories in Birmingham were making thousands of single and double cone springs for upholstered furniture, and easy chairs and settees grew deeper and heavier, Gloag wrote.

    victorianweb.org

    Credit

    Samuel Pratt; the Birmingham spring makers

  2. 1975

    California demands flame-resistant foam

    California's Technical Bulletin 117 (TB 117), a mandatory state standard from 1975, required the foam filling of upholstered furniture to pass a small open-flame test and a smoldering cigarette test, the US Consumer Product Safety Commission (CPSC) staff wrote in 2016. California's furniture bureau told the CPSC that makers met it by treating polyurethane foam with flame-retardant chemicals. Chemists at Duke University tested foam from 102 US couches bought from 1985 to 2010 and found added flame retardants in 85% of them. In couches bought from 2005 on, the most common was TDCPP, a suspected human carcinogen, found in 52%. A TB 117 label predicted a flame retardant, but a missing label did not predict its absence, and the chemicals were common in couches bought outside California too.

    LessonA state test that foam passed only with added chemicals put those chemicals into couches sold across the country.

    cpsc.govebi.ac.uk

    Credit

    California's Bureau of Home Furnishings; the couch study by Heather Stapleton and colleagues at Duke University (2012)

  3. 1988

    Britain tests covers and foam

    After a rise in deaths from fires involving furniture, the UK made the Furniture and Furnishings (Fire) (Safety) Regulations on 26 July 1988. Foam fillings had to pass ignition tests from 1 November 1988. From 1 March 1990 the covers of new domestic furniture had to pass a cigarette test and a test with a small flame the size of a match. Second-hand furniture had to comply from 1 March 1993, and furniture made before 1950 was exempt.

    LessonIn January 2025 the government said evidence had emerged since 1988 of risks from the chemical flame retardants used to pass these tests, and that the rules needed updating.

    legislation.gov.ukgov.uk

    Credit

    the UK government, under the Consumer Protection Act 1987

  4. 2012

    Hides scanned before cutting

    In April 2012 Lectra released Versalis Furniture, a system that captures each leather hide in digital form, including its flaws, places the pattern pieces on it by software (called nesting) and cuts them with a knife over a conveyor. Lectra said the range covered about 80% of what furniture makers needed, from sofas to recliners. Ekornes, the Norwegian maker of Stressless chairs, moved from die presses (steel cutting forms pressed through the hide) to 11 Versalis cutters about nine years before 2024, by Lectra's account.

    digitalengineering247.comlectra.com

    Credit

    Lectra; Ekornes as an early user

  5. 2014

    A smolder test replaces flame

    California's revised bulletin, TB 117-2013, took effect on 1 January 2014, and compliance was required from 1 January 2015. It dropped the open-flame test. Instead the cover fabric, any barrier layer and the filling are each tested against a smoldering cigarette. The state bureau does not regulate flame retardants, but it said makers were no longer compelled to make their products open-flame resistant. Duke University then offered the public free tests of foam. Between February 2014 and June 2016 it received 1,141 samples, and its chemists reported significant decreases in flame retardants in furniture.

    bhgs.dca.ca.govebi.ac.uk

    Credit

    California's Bureau of Electronic and Appliance Repair, Home Furnishings and Thermal Insulation; the screening study by Ellen Cooper, Heather Stapleton and colleagues at Duke (2016)

  6. 2021

    One US rule for sofas

    On 27 December 2020 Congress made TB 117-2013 the national standard for upholstered furniture, in section 2101 of the COVID-19 Regulatory Relief and Work From Home Safety Act. From 25 June 2021 all covered upholstered furniture made, imported or reupholstered in the United States must meet it, and, apart from California's own rules, states may not set fire rules for upholstered furniture. Four years before, CPSC staff had judged that the bulletin's small mockup test gave inconsistent results and did not effectively address fires started by smoldering cigarettes. The same staff counted on average 4,700 fires a year in 2011 to 2013 in which upholstered furniture was the first item to burn, with 390 deaths.

    LessonKeeping flame retardants out of sofas and stopping sofa fires are separate goals, and the regulator's own staff judged in 2016 that this test did not reliably meet the second.

    federalregister.govlaw.cornell.educpsc.gov

    Credit

    the US Congress; the CPSC wrote the rule into the Code of Federal Regulations as 16 CFR part 1640

Watch for

  1. Robots in the upholstery line

    Dvolu, a robot integrator, says a cell it built for an unnamed Canadian furniture maker finds seat cushions with a camera and then stretches fabric, staples, trims and stacks chair seat linings with a Fanuc M-710iC robot. It says the cell gives "tangible labor relief" in a job that is hard to staff, and publishes no cycle times or reject rates. Separately, the start-up Kathedra, founded by Oliver Davila Chasan and David Faes, built a prototype upholstery robot by September 2025 and began a pilot with an unnamed manufacturer in High Point, North Carolina, with $235,000 for development, Business of Home reported. The same report says Rowe, a sofa maker with over 1,100 fabrics that replaces 10% of its fabric line every six months, has automated cutting and moving wood and fabric but not the upholsterers' work.

    Achieved whena maker or an outside party publishes output per shift, reject rates and the number of fabrics handled over several months of production.

    roboticsandautomationnews.combusinessofhome.com

    Claimed by

    Dvolu and Fanuc, June 2026; Kathedra's founders, January 2026

  2. Britain plans a smolder rule

    The UK's Office for Product Safety and Standards and Department for Business and Trade propose to replace the 1988 rules with fire safety requirements based on a smolder test, to keep fire safety high while "meaningfully reducing" chemical flame retardants. The final consultation closed on 23 June 2026.

    Achieved whennew regulations are made and in force, and a later survey measures less flame retardant in furniture sold in the UK.

    furniturenews.netgov.uk

    Claimed by

    the UK government, April 2026, following a policy paper of January 2025

Open

  1. 01

    Robot seat covering across fabrics

    A robot cell that covers drop-in chair seats (a board, a layer of foam and a fabric cover stapled underneath), trained from people's demonstrations, and a public tally of how well it does on many kinds of fabric.

    The brief
    Credit · unclaimed
  2. 02

    Yardage from photos, tested

    A phone tool that takes photos or a 3D scan of an existing chair or sofa and returns how many yards of fabric it needs to be re-covered, with a cut list of pieces laid out on the fabric's width, checked against what upholsterers actually use.

    The brief
    Credit · unclaimed

Open 01 · the brief

Robot seat covering across fabrics

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A robot cell that covers drop-in chair seats (a board, a layer of foam and a fabric cover stapled underneath), trained from people's demonstrations, and a public tally of how well it does on many kinds of fabric.

Why it is still open

Robots that stretch and staple seat covers exist. Giovanni Ferronato patented a robot arm carrying a stapler and a roller that pulls the fabric taut (US 6,993,815, granted 2006, now expired), and Dvolu's 2026 cell stretches and staples seat linings for one maker. Neither has published success rates, and fabric that stretches, wrinkles and changes with every collection is what keeps upholstery manual, as Rowe's 1,100 fabrics show. Searches of GitHub, Hugging Face and the web in November 2026 found no public dataset or tally of robot upholstery across fabric types; the robot datasets on Hugging Face that mention staplers show robots pressing desk staplers.

patents.google.comroboticsandautomationnews.combusinessofhome.com

Built with what exists

A collaborative robot arm with force sensing, such as a Universal Robots UR10e, holding a pneumatic upholstery stapler on a custom mount, with a wrist camera, run inside a fenced or light-curtained cell; LeRobot to record demonstrations and train (see the Note "No download"); a pretrained robot model to fine-tune, such as NVIDIA's GR00T 2 (see the Note "Five demonstrations per task") or Runway's Praxis-1 (see the Note "Open robot model weights").

  1. First step

    Ask an upholstery shop or a furniture training program to let you film 50 seats being covered, from above and close to the hands, noting each fabric.

  2. Done looks like

    200 seats covered in 20 fabrics, from cotton and linen to velvet, vinyl, knit and leather, ten seats each. A working upholsterer grades every seat on a published scale for wrinkles, corner pleats and staple spacing. The success rate and time per seat are reported by fabric, beside the upholsterer's own times on the same fabrics, with all videos and data released.

Open 02 · the brief

Yardage from photos, tested

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A phone tool that takes photos or a 3D scan of an existing chair or sofa and returns how many yards of fabric it needs to be re-covered, with a cut list of pieces laid out on the fabric's width, checked against what upholsterers actually use.

Why it is still open

Fabric sellers publish yardage charts by type of furniture, and Kovi Fabrics calls its chart "just meant to be used as a general guide" because each piece is different. A vendor's guide for upholstery shops (RapidDev) says a vision model estimates yardage from three photos "within ±1 yard about 80% of the time", but gives no test data and tells shops to confirm by measuring in person. A US patent granted to Regina George in 2014 (US 8,849,444) describes tracing a piece with a handheld stylus or laser scanner, building a 3D model and generating flat slipcover patterns for a fabric cutter, but it does not estimate yardage and reports no test of fit. Searches in November 2026 found no published test of photo or scan estimates against the fabric used on real jobs.

kovifabrics.comrapidevelopers.compatents.google.com

Built with what exists

A phone 3D scanning app such as Polycam, or Apple's Object Capture; Blender to mark seams and flatten each surface into a flat pattern piece (UV unwrapping); Deepnest, an open-source nesting program, to lay the pieces on a 54-inch (137 cm) fabric width, with room for pattern repeats; a vision-language model to name each part (seat, inside back, outside arm).

  1. First step

    Ask two upholstery shops to record, for their next 20 jobs, before-photos of each piece and the yards of fabric actually cut, waste included.

  2. Done looks like

    For 50 re-upholstery jobs at three or more shops, the estimate falls within half a yard of the fabric the upholsterer actually cut on at least 80% of jobs, and every photo, scan, estimate and actual figure is published.